For use with membrane hardware where extra support is needed for improved flow rate and throughput. For use with membrane hardware where extra support is needed for improved flow rate and throughput. The polyester drain disc is binder free and has a thickness of 100 µm. It provides a flat surface…

Cytiva Whatman Cyclopore polycarbonate membranes are true pore size microporous membranes featuring the sharp cut-off and reproducible microfiltration characteristics of track-etched membrane filters. Low affinity for stains improves visibility under a microscope Low protein binding…

Black Cyclopore membranes are highly suitable for epifluorescence and other microscopy applications requiring a contrasting background. The polycarbonate membrane is used to filter the sample and is then used directly for analysis. The dark membrane gives lower background fluorescence and improves…

Whatman PTFE membrane filters from Cytiva business are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids, and alkalis. The TE range features polypropylene support material for improved strength and handling Temperature resistant up…

Cytiva Nuclepore black membrane filters are polycarbonate track-etched (PCTE) membranes with high particle visibility for standard plate count and epifluorescence microscopy applications. Smooth, gridded PCTE membrane surface efficiently supports microorganism enumeration in a standard plate…

Anopore inorganic membranes (Anodisc) fromCytiva are well suited for a variety of filtration applications. With a novel aluminum matrix and honeycomb pore structure, Anodisc facilitates controlled filtration. Extreme precision due to high pore density and narrow pore size Virtually transparent…

Cytiva Whatman regenerated cellulose membrane filters are microporous cellulose acetate filters made without wetting agents. RC60 offers low extractables and wide compatibility in both organic and aqueous media. Spontaneous wetting with very good wet strength Chemical resistance…

Membrane-Butler, manual butler for dispensing filtration membranes High reliability. Simple handling with foot switch and stepper motor (applies only to Butler E). Cross contamination risks are minimized. Membrane dispensed rapidly. Highly suitable for use on sterile benches. Compact…

Cellulose nitrate membranes, circles, plain Narrow pore size distribution for improved surface capture and analysis. Low levels of extractables to ensure sample integrity. Recommended for the majority of routine applications, this membrane is manufactured under strictly…

Recommended for the majority of routine applications, this membrane is manufactured under strictly controlled conditions. The user will benefit from the performance improvements that are now available in Whatman membrane filters, including very narrow pore size distribution and low levels of…

Mixed cellulose ester, WME range, circles, gridded Sterile options available for critical applications. Excellent contrast for easier particle detection. Grids are nontoxic and do not inhibit bacterial growth, ensuring sample integrity. Black plain and black gridded membranes have a mix of…

Grade GF 6 glass microfiber filter with good retention for very fine particles. This filter is used in water pollution applications, for removing protein from difficult-to-filter beers, for determination of chlorophyll and phytoplankton residues, for the determination of filterable substances…

Cytiva Whatman PM2.5 PTFE membrane filters are designed for PM 2.5 ambient air monitoring. These high-purity, thin filters are sequentially numbered and come with chemically resistant polypropylene support rings. Polypropylene support rings for robotic air sampling Thermally stable design…

Membrane holder, stainless steel syringe filter type Membrane holder, stainless steel syringe filter type Available in stainless steel and polypropylene with luer fittings for use with a standard syringe. The holders are designed for the quick and easy clarification, sterilization, and removal of…

Cytiva Whatman brand Cyclopore black membrane filter is a polycarbonate track etch membrane (PCTE membrane) that provides a contrast background for epifluorescence and other microscopy applications. High sample visibility, provided by the black membrane filter surface Negligible absorption and…

Cytiva Whatman Grade GF 8 glass microfiber filters are used for filtration of coarse particles. GF 8 offers faster filtration and a higher air flow rate compared to the similar Grade GF 9 filters. Nominal particle retention of 3 µm Air flow rate of 12 s/100 ml/1.56 cm² …

Narrow pore size distribution for improved surface capture and analysis. Low levels of extractables to ensure sample integrity.   Recommended for the majority of routine applications, this membrane is manufactured under strictly controlled conditions. The user will benefit from…

BA83 Protran disc BA83 Protran disc

Higher dirt loading capacity. Excellent contrast for easier particle detection. No surfactants to contaminate samples. Biologically inert with good thermal stability. Sterile options available for critical applications. Black plain and black gridded membranes have a mix of cellulose…

Whatman Grade GF 6 glass microfiber filters from Cytiva business are suitable for water and wastewater analysis, with extremely fine particle retention and added strength. Sub micron filter retention efficiency to capture extremely small particles Inorganic binder for increased strength…

The membrane offers a high degree of internal surface area for greater adsorption of product. Grids are nontoxic and do not inhibit bacterial growth, ensuring sample integrity. No surfactants to contaminate samples. Biologically inert with good thermal stability. Sterile options…

Anopore inorganic membranes (Anodisc), circles, with support ring High pore density and narrow pore size distribution make it an extremely precise membrane. Wide solvent compatibility reduces the need to stock a variety of membranes in the laboratory. No additives used in the manufacturing…

Nytran SPC Nytran SPC Whatman Nytran nylon membranes are available in two formats: Nytran N is moderately charged and Nytran SuPerCharge (SPC) has a very high positive charge. Nytran SPC nylon membranes have a very high positive charge. Improvements in the manufacturing process result in a…

Whatman mixed cellulose ester membranes are composed of cellulose acetate and cellulose nitrate. These membranes are characterized by a smoother and more uniform surface than pure nitrocellulose filters. Also, the color contrast provided by the filter surface facilitates particle detection and…

Whatman PTFE membranes fromCytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization and liquid clarification. Polypropylene grid support material for increased strength Temperature resistant up to 120°C Resistant to most…

Nuclepore track-etched polycarbonate membranes are manufactured from high-quality polycarbonate film and have sharply defined pore sizes, high flow rates, and excellent chemical and thermal resistance. The membranes have a smooth flat surface and exhibit very low levels of extractables. …

Cytiva cellulose nitrate Whatman membrane filters offer narrow sub-micron pore size distribution and low extractable levels. Very fine particles can be retained for recovery or microscopic viewing. Standard membrane filter for most applications involving particles and cells from 0.1 µm to 12.0…

Cytiva Whatman Cyclopore polycarbonate membranes are true pore size microporous membranes featuring the sharp cut-off and reproducible microfiltration characteristics of track-etched membrane filters. Low affinity for stains improves visibility under a microscope Negligible absorption and…

Cytiva clear Whatman polycarbonate membrane filters are made from a pure polymeric film that provides exceptional chemical cleanliness during microfiltration, as well as high visibility under the microscope. Contaminant free to minimize chemical leaching Low tare weight and minimal water…

Membrane filters for asbestos sampling and analysis Controlled pore size distribution Smooth flat membrane: particles are retained on surface and easily visible during optical analysis Nuclepore membranes available in two versions: gold coated or uncoated Asbestos analysis is…

Cytiva Nuclepore filters are manufactured from high-quality polycarbonate film, with sharply defined pore sizes and high flow rates for reproducible AOX analysis. High chemical resistance and thermal stability for a wide range of samples Low, consistent ash levels and low tare weights …

Produced from high-purity nitrocellulose Resistant to mild acids, hydrocarbons, formaldehyde, aniline, isopropyl and petroleum ethers, oils, gasoline and kerosene Attacked by strong acids, bases, ethyl amines, ketones and esters Smooth-surfaced and flexible 0.2 µm pore size…