Accessories

Compare Tool

Select up to 3 products

1 - 32 of 165
Sort
View
Show

Crystal Technologies

  • Oxygen/Moisture Combination Stainless Steel Trap with 1/8 Brass Connector (2)

    PerkinElmer

    Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

  • Neoprene Filter Adapters

    Chemglass

    Neoprene filter adapters are designed to fit between a filtering funnel and a flask. For use with Buchner funnels, Gooch crucibles, filter tubes, etc. Can be used individually or nested with adjacent sizes. Eliminates the boring of rubber stoppers and the difficulties of inserting and removing…

  • 47 mm Screen, Filter Support, S / S

    DWK Life Sciences (Wheaton)

    Designed to handle up to 1000mL of liquid for analysis of particulate or microbiological contamination Glass components manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Flasks have a #2 hose connection for…

  • Sanitary Pressure Filter Holders, Stainless Steel

    Advantec MFS

    Threadless Sanitary Connections 90mm, 142mm, 293mm Filter Diameters Available in Type 304ss and 316ss Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough…

  • High Pressure In-Line Filter Holder, Stainless Steel

    Advantec MFS

    High-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…

  • Stainless Steel Syringe Filter Holders

    Advantec MFS

    re-usable thereby eliminating waste using disposable units use a variety of membranes that may not be availabe in disposable units These 13mm and 25mm type 304 stainless steel syringe holders are economical and re-usable thereby reducing waste. Luer-lock fittings are compatible with…

  • Oxygen Trap

    PerkinElmer

    High efficiency oxygen trap has a capacity of 2.5 liters at room temperature. It is also effective for removing sulphur compounds such as hydrogen sulfide and mercaptans. This oxygen trap is for use with nonoxidizing gases such as; He, Ar, N2, and CH4. Oxygen removal to below 70 ppb using normal GC…

  • Cell Strainers

    Argos Technologies

    Cell Strainers Extended tab for easy handling Argos cell strainers offer a simple, ready to use method for securing single-cell suspensions.  Available in filter mesh diameters of 40, 70 and 100µm. They are compatible with 50mL centrifuge tubes and feature color-coded…

  • Ashless Filter Aids

    GE Healthcare

    Ashless clippings Ashless clippings Whatman ashless filter aids enhance filtration speed by coagulating precipitates or suspensions to form a thick retentive “prefilter” layer on top of normal filter paper. Easily dispersible, the powder is of a purity similar to that of Whatman ashless…

  • Pressure Filter Holders with Reservoir, Stainless Steel

    Advantec MFS

    Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…

  • Filter Stopper RBR #8 0.625" Hole

    Thermo Scientific Nalgene

    No. 8, rubber For use with 145- and 147-series analytical test filter funnels and filter funnel with clamp

  • Balston Air Filter Assembly Type A82

    PerkinElmer

    Provides clean air for AA spectrometers without microcomputer gas controls.

  • Polycarbonate Filling Bell

    Thermo Scientific Nalgene

    Transfer sterile media aseptically from large containers to small media bottles or culture vessels using the Thermo Scientific™ Nalgene™ Polycarbonate Filling Bell. Transparent and autoclavable Fits most common media bottles Nontoxic polycarbonate will not shatter Bell…

  • In-Line Solvent Filter System for Stainless Steel pumps

    PerkinElmer

    In-Line Solvent Filter System for Stainless Steel pumps

  • Ultra Clean High Capacity Triple Filter (oxygen/moisture/hydrocarbon), for GC…

    PerkinElmer

    The easy to use leak-tight cartridge system enables rapid change of exhausted cartridges without interrupting supply or system operation. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…

  • Stainless Steel Gas In-Line Filter Holders

    Advantec MFS

    Threaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…

  • Polyscience Heat Exchanger Replacement Air Filter 305-013

    PerkinElmer

    Polyscience Heat Exchanger Replacement Air Filter 305-013

  • Kit Of O-Rings For Reusable Filter Holders: For #300- And #310 Series

    Thermo Scientific Nalgene

    Kit of O-Rings for 300- and 310- Series reusable filter holders

  • In-Line Filter Trap

    PerkinElmer

    Gas contacts only glass, metal and the adsorbents for purity. The Drierite ® indicator and molecular sieve 5A are packed in glass protected by an outer plastic tube in the event that the glass breaks. Unique loading design allows operation in any orientation without channeling. Designed for GC…

  • Ultra Clean 1 Triple Helium Filter Kit - 1/8 Brass Triple He Filter, 1 Position…

    PerkinElmer

    Cartridge systems make changing gas filters quick and easy. A base plate allows cartridges to be exchanged without introducing oxygen. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…

  • Balston Type 95A Acetylene Filter

    PerkinElmer

    Removes particulate and acetone droplets from acetylene to 99.99% at 0.1 micron protecting your microcomputer gas controls and AA burner system from contamination and corrosion.Recommended for use with AA spectrometers where the air/acetylene filter is not installed. Includes mounting bracket and…

  • NexION Instrument Filter (Back side)

    PerkinElmer

    Instrument filter (back side) for use with the NexION.

  • Ultra Clean High Capacity Combi Filter (oxygen/moisture) for GC and GC/MS

    PerkinElmer

    The easy to use leak-tight cartridge system enables rapid change of exhausted cartridges without interrupting supply or system operation. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…

  • Back Instrument Filter

    PerkinElmer

    As part of preventative maintenance, replacement filters for the NexION 2000 ICP-MS should be replaced regularly for optimal performance.

  • PFA In-Line Filter Holder

    Cole-Parmer

    Nonwetting and nonsticking filter holder is suitable for organic solvents, acids, alkalies, or high-purity filtration. Temperature range is –320 to 500°>F (–196 to 260°>C). Withstands up to 65 psi. Change filter without disconnecting tubing with Tefzel® ETFE clamp…

  • Replacement Air Filter Cartridge, 2nd Stage

    PerkinElmer

    Replacement Air Filter Cartridge, 2nd Stage

  • Replacement Filter Element for Type A82 Balston Air Filter

    PerkinElmer

    For argon and nitrogen filters.

  • The PolyScience Air Filter with Frame

    PerkinElmer

    For use with the PolyScience® WhisperCool™ Refrigerated Chiller 240 V, 50 Hz, 12.2 A part number N0772045 and the PolyScience® WhisperCool™ Refrigerated Chiller 208-230 V, 60 Hz, 12.2 A part number N0772046

  • Open-Face Aerosol Filter Holder

    Advantec MFS

    This 47mm aerosol filter holder is open-face for environmental monitoring or sampling of open atmosphere air and gases. Use for particulate or bacterial analysis. Thermoplastic polymer Polypropylene (PP) construction makes this holder durable and compatible with a wide range of chemical…

  • Indicating Oxygen Trap

    PerkinElmer

    Indicating oxygen trap with a capacity of 40 cc of pure oxygen and 100 psig maximum pressure, to be used downstream of a high capacity oxygen trap.

  • INLINE HPLC FILTER-2UM

    PerkinElmer

    INLINE HPLC FILTER-2UM

  • Air/Argon Hose Assembly, Black, 3.7 meters (12ft) long

    PerkinElmer

    Hose assemblies for connecting Fuel, Air and Nitrous Oxide from supply to instrument.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.