Depth filtration glass micro fiber 934-AH® - Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2). Also widely used in cell harvesting…

The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron…

EZFlow 13mm and 25mm Sample Prep Syringe Filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a…

For supporting funnels, Gooch crucibles, filter tubes, etc., in filtration assemblies Particularly suitable for Buchner and fritted glass funnels, porcelain filters without head pieces and for reverse flow cleaning of filter crucibles Adapters will withstand autoclaving Taper angle in all…

Syringe filters for convenient filtration of small sample sizes through membranes. This glass microfiber syringe filter can be used as a pre-filter to remove interfering particulates before filtering a sample through a membrane.

ProWeigh® Filters are 1.5µm Binderless Glass Fiber Filters with all preparation steps done for you. All ProWeigh filters are prepared according to Standard Methods requirements. 47mm binderless glass fiber filters are weighed, washed 3 times in deionized water, dried at 105C and…

Foxx Life Sciences’ Autofil Bottle-Top Filtration Systems are disposable, sterile, vacuum operated systems for the sterile preparation of buffers, tissue culture media, microbiological media, and other biological fluids. Systems are available with asymmetric 0.22 µm (sterilization…

Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…

Increased throughput and speed of sample preparation. Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are integrity tested…

Designed to handle up to 1000mL of liquid for analysis of particulate or microbiological contamination Glass components manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Flasks have a #2 hose connection for…

The Millipak are 0.22 µm membrane filters designed as a safe and efficient barrier against particulates and bacteria. The Millipak devices use the unique, clean stacked disc design that eliminates the risks of particulate-producing woven downstream support found in many pleated membrane…

From Very Fast Filtration to Very Slow Filtration, the wide range of GVS Quantitative Papers provide the right solution for any application need. Highest retention and very slow flow Extremely difficult filtrations Analytical precipitates: barium sulphate, matastannic acid and finely precipitated…

Dual Membrane Self-Locking Filter The Dual Membrane Self-Locking Filter for Pipet-Aids® eliminates the possibility of cross-contamination due to over-pipetting. This unique protective filter which incorporates both 0.8µm hydrophilic and 0.8µm hydrophobic membranes to prevent further use once…

Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is…

Best-in-class molecular filtration technology It's not just about the carbon. Our filters are designed and manufactured for safety and optimal performance. The scientists and chemists in our R&D lab continuously work to improve the filtration technology used in our products. The…

Filter material and discs (paper, PTFE, and polypropylene).

Applications: Analytical Sample Prep, HPLC; Qualitative Analysis; Filtration of Aqueous Solutions

75/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

Provides fast sample processing, high sample recovery This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein & nucleic acid purification, concentration & desalting. …

Sartolab® RF 50, PES, vacuum filtration units are single-use units for the sterile filtration of sample volumes up to 50 mL. User Benefits Highest flow rates with an asymmetric membrane and a large surface area No loss of protein with a very low protein binding membrane Low…

Process larger volumes of liquids for analysis of particulate or biological contamination Wheaton-33® low extractable borosilicate glass Unit includes a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in…

The MTC Bio C5070 ReadyStrain Cell Straining Kit with 70µm Strainer, 50mL Tube and Screw-Cap, White, Sterile, Individually Wrapped, Pack of 50, provides all the necessary parts for filtration of cell suspensions and combining them into a single, preassembled, ready to use, sterile packet. The kit…

Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

The interpretations by various auditors of the requirements of prepared filters for TSS and VSS analysis often differ from one regulatory body to the next. ProWeigh® Double filters from Environmental Express strictly document ALL preparation steps outlined in Standard Methods 2540D and E for…

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …

75/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…

Membrane filters for quantitative determination of microorganisms in QC analysis. Cellulose Nitrate (Cellulose Ester) and Cellulose Acetate filters are offered with or without a hydrophobic edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in…

Depth Filtration Glass Micro Fiber GRADE C - Fine porosity, fast flow rate, with a 1.2 µm size particle retention. Primarily used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28…

Ahlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is…