FDA cGMP (Current Good Manufacturing Practices) filter press for lipids removal and for polishing up any Oleoresin dissolved in a solvent. We only sell FDA Compliant filter presses capable of filtering solvents at -40 Celsius. There is no faster or more convenient way to filter your…

FDA cGMP (Current Good Manufacturing Practices) filter press for lipids removal and for polishing up any Oleoresin dissolved in a solvent. We only sell FDA Compliant filter presses capable of filtering solvents at -40 Celsius. There is no faster or more convenient way to filter your solution…

FDA cGMP (Current Good Manufacturing Practices) filter press for lipids removal and for polishing up any Oleoresin dissolved in a solvent. We only sell FDA Compliant filter presses capable of filtering solvents at -40 Celsius. There is no faster or more convenient way to filter your solution…

This apparatus combines two analytical techniques, Soxhlet extraction and Dean-Stark azeotropic distillation, into a single process for the removal of water, chlorinated dibenzo-p-dioxins (CCDs) and chlorinated dibenzofurans (CDFs) from wet particulate samples. Determination of water and…

All glass extraction thimble permits viewing during extraction process and subsequent weighing. Sizes correspond to CG-1368 or CG-1369 extractor. Available in coarse or extra coarse porosity.

Condensers have water-jacketed Standard Taper inner joint. Complete with condenser, flask and extraction tube. The low thermal expansion rate means that the PYREX brand extractors can be routinely used in applications requiring protracted heating at temperatures as high as 230°C. The inherent…

High purity, seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Glass Fiber thimbles are made of pure borosilicate glass microfibers. These binder-free filters can…

For extraction with liquids of lighter density than liquid extracted such as water with ether; 9422 and 9414 are used with extraction flask 9451.

Used for the continuous extraction of solids with a suitable solvent. Units are supplied complete with flat bottom boiling flask, Soxhlet extractor and Allihn condenser. The extractor capacity shown is the solvent volume held in the extractor to the top of the siphon tube. The siphon tube is…

Adapter permits sublimation directly in any reaction vessel having an standard taper outer joint; simply remove condenser or other apparatus from joint, insert adapter and begin. Adapter has two components, the cold finger condenser and vacuum adapter. Adapter has a #18 Chem-Thread to allow for the…

FDA cGMP (Current Good Manufacturing Practices) filter press for lipids removal and for polishing up any Oleoresin dissolved in a solvent. We only sell FDA Compliant filter presses capable of filtering solvents at -40 Celsius. There is no faster or more convenient way to filter your solution…

High purity, seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Advantec offers thimble filters in pure PTFE Fiber and PTFE/Silica Fiber. PTFE is inherently hydrophobic…

These heat-insulating pads with low thermal conductivity are made from flexible aluminum and silica oxides with a small amount of organic binder. They are useful for protecting surfaces when working with hot items like crucibles or flasks. Sold in packs of 12 or case of 120. …

Ideal for laboratory-scale refluxing, botanical extraction, and cannabis extraction applications, Borosil® Soxhlet Extractors are constructed from stress-free, 3.3 Low-Expansion Borosilicate that is mechanically strong and incredibly resistant to thermal shock. Borosil® Soxhlet…

A grease-free, two-piece sublimation apparatus consisting of an upper water cooled condenser and lower vessel to hold the material to be sublimed. The sublimate collects on the lower end of the condenser which has a flat bottom. Condenser is constructed using a grease-free, threaded valve.…

With Standard Taper Joints Complete with Allihn condenser with joint at bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95…

Improved design of ACE extractor with Friedrichs Condenser in place of Allihn Condenser. Complete consists of flask cap, condenser, extractor, and flask.

Soxlet Extractor Upper Joint: Available in 34/45, 45/50, and 55/50 Lower Joint: Available 24/40 Used for the extraction of solids with a solvent.

Extractor body only, with stopcock for withdrawing samples from extraction chamber. Can be used interchangeably with the standard Soxhlet extraction apparatus.

Optimum solution for the acid/basic hydrolysis of food and feed samples prior to solvent extraction for total fat analysis. Improves Analysis Hydrolysis / digestion by acid or base Ensures conformity with AOAC standard No sample transfer – no sample loss Crucibles go…

Industrial filtration solution, Buchner type, mounted on a trolley.  Ideal for filtering solids, lipids, carbon, clay, etc...  Filter in minutes what you would normally do in hours. Our trolleys are a leader in Depth Filtration technology, being the easiest to use and least expensive to…

FDA Food grade cellulose filter paper for laboratory filtration. This is a premium filtration paper that is FDA CFR 21 compliant and has a recall traceability protocol to ensure GMP compliance.  This paper is more expensive than low-quality brands, but the premium is well worth the peace…

Key Features: 304 Stainless Steel Blast Tube 60-90g *(Scales to 1lb) **To scale to 1 lb you need the 1 lb upgrade kit! To scale to 1 lb you also need the #15LP tank Required for the Reclaim Side, not the tank in this kit 304 Stainless Steel Heavy Duty Ball Valves System Rated…

This 1L PYREX® single piece continuous liquid/liquid extractor is for use with solvents of heavier specific gravity than sample liquid being extracted. It is designed to meet EPA test method requirements outlined by SW-846, RCRA, and CLP. The sidearm is sealed to the extractor body just below the…

High purity, seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Silica Fiber (Quartz) thimbles are made of pure quartz microfibers and are binder-free. Ideal for air…

This 1000 mL graduated funnel, 47mm is designed for assembly with the fritted glass support base, Cat. No. 33972-B. Disclaimer: This product is not intended to mitigate the presence of microorganisms on surfaces or in the environment, where such organisms can be deleterious to humans or the environment.

These borosilicate glass extraction apparatus are used to measure the fat content in dairy and other food products. Reference AOAC 989.05 for fat in milk. Top is tooled to accept rubber stoppers (not included).

This borosilicate glass X-Large Soxhlet extraction apparatus is used for the continuous extraction of solids with a suitable solvent. Complete units are supplied with a round bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn…

Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom flask.

Glass thimbles are used to sample dust particles and aerosols from gaseous streams in the analytical registration of environmental pollution and for Soxhlet extractions requiring solvents too aggressive for the cellulose thimbles.

Modified version of 7900 Apparatus. Sample tubes have been replaced with a flow-thru quartz or borosilicate coil for continuous radiation of small or large samples. Consists of a cylindrical lamp housing, medium pressure photochem lamp, quartz or borosilicate coil (with or without jacket), and…

1.5" x 18" 304 Stainless Steel Material Tube 90g 304 Stainless Steel Heavy Duty Miniature Ball Valves System Rated to 100PSI Multiple port connections for _" 316 Stainless SAE 37 Degree 304 Stainless Steel Base Container 4" diameter by 8" tall Tri-Clamps at…