Lab Evaporators & Concentrators
Lab evaporators are available in various forms, such as rotary evaporators, speedvacs, and spray dryers.
Centrifuge concentrators carry excellent control and automation features, which create precise and consistent evaporation conditions. This also reduces the potential for user error.
Features of lab concentrators include precise temperature control features to provide evaporation solutions on heat-sensitive materials and can be crucial during thermally sensitive applications.
Lab evaporators can reduce any time required to reduce the time needed for sample concentration to save time during applications.
Additionally, lab concentrators facilitate solvent recovery, reduce the requirement for chemical disposal, and contribute to more efficient and environmentally friendly laboratory practices.
-
CentriVap Cold Trap
LabconcoThe CentriVap Cold Trap collects evaporated liquid from a CentriVap Concentrator, protecting an accessory vacuum pump from the corrosive effects of vapors and fumes emitted from samples. Exclusive features include: brushed, stainless steel and glacier white, epoxy-coated steel exterior with blue…
-
Sample Concentrator
Techne (Cole-Parmer)Fits Dri-Block® Heaters Range: 25° to 200°C (dependent upon heater) Fully adjustable gas reservoir to suit the levels of liquid in sample tubes Gas chamber can be removed and dri block used for routine incubation and temperature control As sample is heated, gas…
-
The CentriVap Vacuum Concentration System includes the following components: Acid-Resistant Benchtop Vacuum Concentrator with Glass Lid, Cold Trap, Clear Canister, Acid Insert, 12-13 mm Acid-Resistant Rotor, Glass Trap, and Vacuum Tubing and 6 Clamps.
-
These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…
-
Centrivap Cold Trap
LabconcoCFC-Free 4 liter stainless steel collector An epoxy coated aluminum base with an acrylic/PVC thermoplastic control panel. Reaches -55°C in less than 15 minutes. Ultra-Low Cold Trap reaches -85°C in less than 30 minutes. Ready indicator illuminates when the collector coil reaches…
-
Savant™ SpeedVac Universal Vacuum Systems
Thermo ScientificSafely handle and recover solvents with the Savant™ SpeedVac™ Universal Vacuum Systems, equipped with an easy to use, wide-mouth glass condensation flask. This single integrated unit combines an oil-free vacuum source and refrigerated vapor trap, and can be connected to any of the…
-
-
-
SCILOGEX RE100-Pro Rotary Evaporator
ScilogexEasy to read large digital LCD display Large 5L heating bath with a temperature range of ambient to 180°C Detachable LCD operating panel for remote control purposes Speed range from 20 to 280 rpm The Scilogex RE100-Pro Rotary Evaporator fetaures a large to read large digital…
-
Savant™ SpeedVac™ SPD1030 Integrated Vacuum Concentrator Systems
Thermo ScientificThermo Scientific™ Savant™ SpeedVac™ SPD1030 and SPD2030 Vacuum Concentrators are fully integrated systems that combine concentrator, refrigerated cold trap, diaphragm pump and vacuum gauge in a single, compact unit. Convenience and Flexibility in two capacity ranges The…
-
Head, Buchi CR Assembly
Ace GlassReplacement glassware for Buchi rotary evaporators. Available plain or safety coated.
-
Interface I-300
BuchiCentral control of all process parameters The Interface I-300 is the central control unit for all process parameters of a Rotavapor® R-300 system. This includes rotation speed, temperature (heating, cooling, vapor) and pressure. Various distinct operating modes (e.g. automatic, dynamic,…
-
Linear Solvent Recovery System
DWK Life Sciences (Kimble)This three-position linear solvent recovery system is intended for use with Kuderna Danish evaporative concentrators. Heating mantle, controller, splash guard, clamps and supports provided with the complete system Power: 15 amps – 120 volts Refrigerating circulator recommended…
-
Reacti-Block™ Aluminum Blocks
Thermo ScientificConfigure your Thermo Scientific™ Reacti-Therm™ Module to fit your needs with interchangeable Thermo Scientific™ Reacti-Block™ Aluminum Blocks. They are available with many hole configurations and are machine-drilled to accommodate almost any size Thermo Scientific™…
-
RapidVap® Vertex™ Dry Evaporators
LabconcoThe RapidVap Vertex Evaporator is ideal for preparation of samples in a variety of applications including drug discovery, clinical analysis, environmental testing, agrochemistry, and forensic evidence processing. Quality Labconco construction and reliable performance are backed by a one year…
-
A variety of accessories are available for use with Buchi evaporators
-
MiniVap® BlowDown Evaporator
PorvairThe MiniVap® is designed for low usage R&D departments where low numbers of individual plates or vials need drying. The MiniVap® is easy to operate and maintain. Can be used with any ANSI/SLAS 96-well plate. Compact footprint - fits all standard fume cupboards.
-
2nd Generation Ultravap® Levante - The intuitive, automation-ready sample evaporator for microplates & tubes. Robot-compatible Increase rate of sample dry down with evaporation temperature of 80 degrees C - reducing drying times by up to 50% Color…
-
Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.
-
S-EVAP Solvent Evaporators for Round Flasks
OrganomationThe S-EVAP-RB® solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using hexane and other approved solvents and concentrating extracted materials from Soxhlet operations.…
-
Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…
-
Centrivap Vacuum Pumps
LabconcoDesigned for use with all rotary and centrifugal evaporators Pumps are two-stage, oil-sealed and sliding vane with cast aluminum casing. Labconco XPress Laboratory Equipment Thomas number 4366R20 is part of Labconco's XPress Laboratory Equipment Program. These items are…
-
100 Position MULTIVAP® Nitrogen Evaporators
OrganomationThe MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…
-
Centrivap Concentrator Accessories
LabconcoCentriZap Strobe Light Enables user to shine a strobe light into the CentriVap’s chamber to easily view samples while the rotor is spinning. Includes mounting holster and hardware for attachment to the right side of the CentriVap. Shipping weight 2 lbs. (0.9 kg) Glass Lid May be…
-
Savant™ SpeedVac™ SPD300 Large Capacity Vacuum Concentrator
Thermo ScientificEvaporate strong acids, bases and aggressive organic solvents with the Thermo Scientific™ SpeedVac Modular Vacuum Concentrators. Approved for combinatorial chemistry, these concentrators incorporate an intuitive programmable user display for enhanced usability.
-
Hei-VAP Expert Rotary Evaporators
HeidolphPrecise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. Central operating panel with 5“ touch display Clear display of all values (Basic…
-
Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. Central operating panel with 7“ touch display Clear display of all values (Basic and…
-
24 Position N-EVAP® Nitrogen Evaporators
OrganomationThe 24 Position N-EVAP® is Organomation’s most adaptable evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can…
-
Parts & Accessories for Ai SolventVap Rotary Evaporators
Across InternationalEvaporating Flasks Heavy wall, high quality evaporation flasks for SolventVap series rotary evaporators. Glass material: high borosilicate glass 3.3. Receiving Flasks Heavy wall, high quality receiving flasks for Ai SolventVap series rotary evaporators. Glass material: high borosilicate…
-
9 Position MULTIVAP® Nitrogen Evaporators
OrganomationThe MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…