Evaporators

Compare Tool

Select up to 3 products

HomeAll Products

Evaporators

1 - 32 of 170
Sort
View
Show
  • The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included…

  • Replacement glass steam tube for Buchi rotary evaporators using the C or CR assemblies.

  • A variety of accessories are available for use with Buchi evaporators

  • Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • Evaporating Flasks Heavy wall, high quality evaporation flasks for SolventVap series rotary evaporators. Glass material: high borosilicate glass 3.3. Receiving Flasks Heavy wall, high quality receiving flasks for Ai SolventVap series rotary evaporators. Glass material: high borosilicate…

  • These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

  • Adapters permit the connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator. Adapters have a top outer joint of the listed size and a 20-400 G.P.I. thread at the bottom. A PTFE-lined, polypropylene, double-threaded connector attaches the…

  • Thermo Scientific™ Savant™ SpeedVac™ SPD1030 and SPD2030 Vacuum Concentrators are fully integrated systems that combine concentrator, refrigerated cold trap, diaphragm pump and vacuum gauge in a single, compact unit. Convenience and Flexibility in two capacity ranges The…

  • The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

  • Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Traps have a 24/40 top outer joint and the listed size of lower inner joint.

  • Widely used to concentrate samples, particularly pesticides and other pollutants prior to instrumental analysis Includes a two- or three-ball Snyder column, a flask and a spring-mounted collection tube for convenient access to samples Complete apparatus consists of a Snyder column 150 mm…

  • The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

  • UltraSeal™ Lite

    J.G. Finneran

    The Ultraseal™ Lite semi-automatic microplate heat sealer from Finneran Porvair processes deep well, shallow well, low profi le deep well, fi lter, and assay plates that conform to the ANSI/SLAS standard format. The Ultraseal™ Lite heat sealer operates using 400W of heating elements…

  • Thermo Scientific™ Savant SpeedVac™ DNA130 is a compact, integrated vacuum concentrator designed for fast, efficient concentration of DNA and RNA applications. SpeedVac™ DNA130 vacuum concentrator will support sample preparations with ease and efficiency. Compact, easy to…

  • Rapidly concentrates multiple samples New style, compact with small footprint Built-in vacuum delay Centrifuge up to 1725 rpm Easy-to-read digital control panel Epoxy coated aluminum base, acrylic lid, phenol-free gasket compliment this system. Optional “heat boost”…

  • The S-EVAP-KD® solvent evaporator combines standard Kuderna-Danish concentration procedures with a unique rotary water bath and manifold, increasing sample throughput and conserving bench space. The instrument comes in 5, 8, and 10 position models. The S-EVAP-KD instruments are available in two…

  • Central control of all process parameters The Interface I-300 is the central control unit for all process parameters of a Rotavapor® R-300 system. This includes rotation speed, temperature (heating, cooling, vapor) and pressure. Various distinct operating modes (e.g. automatic, dynamic,…

  • Concentrates DNA/RNA, nucleotides, proteins and other samples quickly 1,400 rpm; 240 x g fixed rotational speed Compact footprint Motorless drive and sealed chamber Quiet operation even with pump on Narrow, 13" width saves valuable bench space. Three evaporation modes…

  • CentriVap aqueous, acid and solvent systems include all of the components necessary to begin operation except for the vacuum pump, which is sold separately. Each system includes a benchtop concentrator, cold trap, clear canister, 12-13 mm rotor, vacuum tubing, 6 clamps and the appropriate trap…

  • The RV 8 Rotary Evaporator is the manual basic model in the family of IKA Rotation Evaporators. It finds a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing and quality assurance, in laboratories, and in plant…

  • The Refrigerated CentriVap Centrifugal Concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. This exclusive concentrator combines a refrigeration system that cools to -4°C with…

  • The MiniVap® Gemini Sample Concentrator is a two-position nitrogen blowdown concentrator and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design…

  • Thomas Nos. 1203C84 and 1203C87 The newly developed product line from IKA® in ergonomic, compact design with innovative functions to improve operating results. Rotary evaporators with integrated heating bath HB 10 basic (3 litre) incl. dry ice condenser. Heating bath with adjustable…

  • RE601 is a highly functional and programmable rotary evaporators which are standard equipped with motorized lift, vacuum regulator, vapor temperature display functions and automatic distillation function. Features One touch electric lift for easy up and down movement Digital…

  • Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

  • The single plate MICROVAP microplate evaporator is one of the most compact sample concentrators available, and it continues to meet the needs of the life science and pharmaceutical industries. This microplate concentrator is ideal for laboratories needing efficient solutions for the gentle…

  • The 6 position N-EVAP’s ability to expand the sample size range with an optional large sample holder makes it an ideal instrument for laboratories that will be evaporating up to 6 samples at once and are using a wide range of sample flask outside diameters. The standard instrument fits…

  • Ingenious rotary evaporator for use with any laboratory stirring motor. Hollow glass or stainless steel shaft with 14/20 or 24/40 ends. Micro version with hollow glass and 14/40 inner joint available. Complete item supplied with joint clamp. Does not include stirring motor, chuck, flask or splash guard.

  • The 12 Position N-EVAP® nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying…

  • These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

  • Cascade Dry Ice Trap

    Cascade Sciences LLC

    Got Ice? Save money with this “ice bucket” style cold trap. Fill the internal stainless-steel reservoir with a cold slurry mix of ice/ alcohol/ dry ice and set inside the larger steel vessel. The cold surface of the trap attracts and condenses material that would otherwise be ingested…

  • Designed for use with all rotary and centrifugal evaporators Pumps are two-stage, oil-sealed and sliding vane with cast aluminum casing. Labconco XPress Laboratory Equipment Thomas number 4366R20 is part of Labconco's XPress Laboratory Equipment Program. These items are…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.