These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

Simple one-handed lift operation for ease of use Set and view rotation speed, temperature, and timer on two large LCDs A unique PTFE sealing system offers excellent thermostability PID temperature controller provides stable temperature control Small footp

The Automatic 20 Position N-EVAP® is an advanced blowdown evaporator combining classic blowdown technology with timed automation. The unit can run in automatic or manual mode due to the integration of a unique pneumatic system. The automatic mode removes samples from the heating medium when the…

The 24 position MICROVAP evaporator is intended for concentrating small volume, small batch samples, such as concentrations of groups of samples in microcentrifuge tubes and GC vials. It offers an effective and compact solution to evaporation of samples for life sciences and pharmaceutical…

The 15 position MICROVAP evaporator is intended for small batch solvent evaporations, such as concentrations of sample groups in microcentrifuge tubes. It offers an effective and compact evaporation solution for samples in life science and pharmaceutical laboratories. Each MICROVAP uses…

Ai SolventVap 50L series rotary evaporators is now ETL tested to UL/CSA standards, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. SolventVap comes standard with vertical glassware and digital temperature/rotation…

Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

The 12 Position N-EVAP® nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying…

Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the listed sizes. NOT SUPPLIED WITH COMBI-CLIP. COMPATIBLE WITH BUCHI ROTARY EVAPORATORS, R210, R215 and RII MODELS.

The 34 Position N-EVAP® nitrogen evaporator offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of the N-EVAP line. The evaporative system, along with the…

Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

The S-EVAP-RB® solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using hexane and other approved solvents and concentrating extracted materials from Soxhlet operations.…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The ROT-X-TRACT-S® rotary Soxhlet extractor can accommodate up to 8 or 10 Soxhlet extractors. The bath cover disk holes can accommodate round sample flasks from 125 mL to 1 L. A wide range of sample sizes and quantities make this instrument ideal for Soxhlet extraction of samples in any lab. …

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

Caron’s condensate recirculator turns both standard tap water and environmental chamber condensate into lab quality 1 megOhm water. The CRS is a compact and easy to install alternative to expensive whole-lab water systems, and recycles condensate water i

The RapidVap Vertex Evaporator is ideal for preparation of samples in a variety of applications including drug discovery, clinical analysis, environmental testing, agrochemistry, and forensic evidence processing. Quality Labconco construction and reliable performance are backed by a one year…

Replacement vapor (steam) tube adapter for Büchi® R-200/205 rotary evaporators. Adapters have a 50mm OD top flange with a tapered interior to fit the Büchi® sealing ring. Lower portion of the adapter has the listed standard taper inner joint. Each tube is supplied complete with…

Evaporating Flasks Heavy wall, high quality evaporation flasks for SolventVap series rotary evaporators. Glass material: high borosilicate glass 3.3. Receiving Flasks Heavy wall, high quality receiving flasks for Ai SolventVap series rotary evaporators. Glass material: high borosilicate…

The Ultraseal Autocapper PRO designed to cap and seal diff erent types of microwell plates with pre-laid capped sheets and rubber gasket seals. Our product uses three different pressures that are pre-set, this includes a low sealing force of 100kg, medium sealing force of 200kg and a…

Widely used to concentrate samples, particularly pesticides and other pollutants prior to instrumental analysis Includes a two- or three-ball Snyder column, a flask and a spring-mounted collection tube for convenient access to samples Complete apparatus consists of a Snyder column 150 mm…

The MiniVap® Gemini Sample Concentrator is a two-position nitrogen blowdown concentrator and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design…

The S-EVAP-KD® solvent evaporator combines standard Kuderna-Danish concentration procedures with a unique rotary water bath and manifold, increasing sample throughput and conserving bench space. The instrument comes in 5, 8, and 10 position models. The S-EVAP-KD instruments are available in two…

Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. This mini-rotary evaporator is designed with slide jack mechanism for…

2nd Generation UltraVap® Mistral - a automation compatible blowdown evaporator.  Fully liquid handling robot-compatible dry down station  Hotter than ever - Increase rate of sample dry down with new evaporation temperature of 80 degrees C - reducing drying times by up to…

Thomas No. 1203D08 Industrial vacuum source for many different in-house users; usually fixed pipes. Thomas No. 1203D09 For single or multiple connection bench top diaphragm vacuum pump. High quality vacuum valve for an optimum controlled operation. The integrated check valve eliminates…

5L Rotary Evaporator Green Pkg Complete turnkey 5L rotary evaporator, HBX Green Package is ideal for benchtop optimized ethanol recovery. 115V. 5L Rotary Evaporator Platinum Pkg Complete 5 Liter Benchtop Rotary Evaporator System. HBX Platinum Pkg offers best integrated vacuum control in…

The BUCHI accessory is suitable for use with Multivapor™ evaporator unit models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

Fast, unattended concentration of environmental samples Combines mechanical vortex, heat and nitrogen blow down technologies Process eight samples up to 450 mL in size at once Vortexes up to 500 rpm. Heat warms samples from ambient to 70°C. The nitrogen blow down manifold is microprocessor…

Rapidly concentrates multiple samples New style, compact with small footprint Built-in vacuum delay Centrifuge up to 1725 rpm Easy-to-read digital control panel Epoxy coated aluminum base, acrylic lid, phenol-free gasket compliment this system. Optional “heat boost”…

Manifold is a low cost solution for the concentration of product in 96, 48 or 24 well blocks. Delivers equal amounts of gas to each well to gently speed solvent evaporation. Needles are constructed of stainless steel. 96 well unit has the needed pressed into the block, while the 11, 15, 24 and 48…