The UVP BioSpectrum Advanced is an all in-one BioImaging system with in vivo imaging capabilities for sample documentation and analysis, including in vivo animal imaging, plant imaging, chemiluminescence, NIR, and fluorescence. This all-in-one system is perfect for any lab within research…

More than just a gel box, the myGel™ Mini incorporates a direct-connecting power supply for a proper connection every time. Truly an electrophoresis system, it is supplied complete with the power supply and two casting sets, including gel trays and combs. Act now, and get this entire starter…

Make your data work for you! Quickly grab quantitative images of your blots or gels right on your bench with the Omega Lum C. With its broad dynamic range and sensitive detection, you can’t get better data from your experiments anywhere else. And it is so easy – you’ll never…

The MaGELin Western Transfer System provides the user with a complete system for the rapid transfer of protein or peptide samples or nucleic acids separated by mini polyacrylamide gels to 8cm x 10cm or 10cm x 10cm membranes. The unit accommodates two cassette sandwiches for simultaneous…

Gel Size: 43cm x 36cm Buffer volume: 530 ml Overall height: 48 cm Unit footprint: 49 x 22 cm The IBI STS-45i sequencing unit has a complete list of features that has made it a favorite in laboratories worldwide. Featuring easy turn knobs that are designed for ease of…

Molecular biology grade Tris (Tris-(Hydroxymethyl) aminomethane) buffer (pH 8-9) is used for the preparation of buffer solutions for restriction enzymes or nucleic acid modifying enzymes. Tris base should be stored dry at room temperature.

Gel Size: 22 x 20 cm Buffer volume: 550ml each chamber Designed for high resolution DNA or protein separations. It is ideal for mapping purposes or for blotting applications.

Gel Size: 7cm(w) x 10cm(l) Buffer volume: 375ml Designed for quick screening and rapid, linear separation of nucleic acids. The QS710 (IBI No. IB51000 ) requires minimal set-up and provides excellent band resolution and consistent lane-to-lane mobility for accurate results. A versatile system,…

IBI’s CS-9615 is a Casting Fixture built to hold and seal the GB-9615, 23.5cm (wide) x 15cm (long) Gel Bed, during the pouring of agarose gels. This fixture seals both ends of the gel bed and once the agarose has cooled, the gel bed can be easily removed. The CS-9615 is constructed of…

20X Saline-Sodium Citrate (SSC) buffer is used in both nucleic acid hybridization and blot transfer procedures.  20X is the maximum concentration used; 0.2X may be used depending on the application. Complete Certificate of Analysis available for each production lot, along with full…

Introduce chromatographic separation to your class and show them how dyes of different colors separate on the basis of their size and shape. This experiment contains materials for dye separation which include dye sample, elution buffer and plastic disposables. Columns may be rinsed and reused. …

Tris-HCl buffer has many applications in molecular biology work, including use in nucleic acid purification. This product can be diluted to obtain the desired concentration. Complete Certificate of Analysis available for each production lot, along with full formulation information. …

Cutter, scooper, trays and rulers for gels High-quality, durable construction Gel-Cutter's sharp acrylic edge is ideal for cutting and removing gel material. Gel-Scooper is made of a strong acrylic with a beveled edge. This design makes it easy to transfer gels from…

Combines the binding characteristics of nitrocellulose with the strength of nylon Outperforms nitrocellulose in extended handling applications Extremely strong and dimensionally stable hybridization membrane Ideal for RNA and DNA transfers Unique process of impregnating pure…

Designed to be User Friendly No Focusing Auto-exposure works even with faint bands ENDURO™ GDS II and GDS Touch II are the next generation Gel Documentation Systems from Labnet International. These gel documentation systems are used for visualization of DNA and protein stained…

The Axygen® horizontal gel box accessories are designed to offer exceptional durability and efficiency. These accessories provide excellent value and years of reliable service.

The Edvotek MV10 gel tank is designed for easy separation of proteins on polyacrylamide gels utilizing a unique gel support cassette clip. It allows gels to be easily inserted or removed and holds them in place securely. The MV10 unit holds one 9 x 10 cm gel cassette and can accommodate most…

Supported nylon membrane, optimal for all traditional DNA and RNA transfers Naturally hydrophilic, no need for wetting agents Quality controlled manufacturing process for consistent, accurate results Higher binding capacity (approx. 350 µg.cm 2 ) than nitrocellulose …

This system incorporates Owl°s EasyCast design with an external caster. The UVT gel tray is fitted with a gasket which allows the tray to fit snugly into the external gel caster to provide a leakproof seal without tape. Sample loading is greatly enhanced using micro well pipette format combs…

Labnet International is proud to introduce the ENDURO™ GDS Gel Documentation System. This state-of-the-art imaging system designed for the basic imaging market provides an incredible combination of performance and value. It is a perfect fit with the rapidly expanding ENDURO™…

Fast and efficient transfer of high molecular weight proteins Faster blotting without heat build-up SuperSafe™ interlocking lid Corrosion-resistant electrodes Deeply seated electrodes to prevent damage One-way only cassette entry To ensure uniform temperature, a magnetic stir bar is…

The DuoSource™ electrophoresis power supply has been reimagined and now includes a built-in timer. Run gels quickly in only 20-30 minutes at 150 V! Features:  Group Size: For 1 or 2 Units  Built-in Timer  Max Voltage: 150 Volts  Voltage Steps: 100…

Replaces hazardous ethidium bromide (EtBr) Better sensitivity than EtBr (down to 0.1ng) Excitation of both UV and blue light Ships at ambient temperature (store at 4°C) Two types: PS (Pre-Stain) or LD (Loading Dye) Compatible with SmartBlue™ Transilluminator …

MultiDoc-It Imaging Systems View and capture brilliant color gel and plate images High resolution 15.1 megapixel digital color camera Sturdy multi-user design Capture software loads on your computer Side access doors (select models) allow for moving or cutting the gel without…

Gel Size: 20cm(W) x 25cm(L) Buffer volume: 1200ml The IB56000 HR2025 is a high resolution system ideal for separation of nucleic acids in agarose gels. It is also designed for rapid screening of PCR fragments, RFLP analysis or plasmid screening, field inversion, genomic DNA separations and…

The UVP UVsolo touch is an extra compact stand-alone imaging system for gel documentation. The system is designed to acquire gel images with exceptional ease and without the need for training. Technical specifications and capabilities: Comes with light-sensitive black and white 5.0…

Run the full spectrum of horizontal electrophoresis experiments with this versatile package! Our newly reimagined M12 Complete™ supports one or two student groups in two standard length gel trays for experiments that require less separation, or one long gel tray for experiments that require…

The UVP GelSolo is a compact, easy-to-use, stand-alone system for gel documentation. It is designed to acquire gel images easily and without any need for training, making it ideal for multi-user laboratories and practical trainings. High resolution 5.0 MP camera Highly sensitive zoom…

Washing and Incubation of strip-based assays Automated processing of up to 40 strips per run Allowing 2 different detections carried out simultaneously Reagent delivery system for up to 8 fluids High precision volume dispensing Minimized dead volume to save…

Molecular biology grade TAE buffer (Tris-acetate-EDTA buffer) is used for the electrophoresis of nucleic acids and gives excellent resolution of the DNA bands under low voltage. Store at room temperature.

The myVolt Mini is a compact power supply ideal for basic, constant voltage applications. Users can select between a constant 100V or 200V output. Compact and simple Choose constant 100V or 200V output Two pairs of output terminals Stackable The myVolt Mini is a compact…