pH and temperature measurement with one electrode Superior stability with high accuracy pH and temperature measurement Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and Seven Series meters and others which accommodate NTC30 thermisters with…

Ross® Sure-Flow Easy cleaning in waste-waters, food samples, colloids, soils and slurries Has optimum flow rate for high purity waters, drinking waters and buffers Produces fast, stable responses in samples that vary in temperature pH range is 0-14 over a temperature range of…

Orion Triode 3-in-1 Probe is a practical solution for field and plant use. The pH/Reference/ATC probes are all in one body. It's non-refillable, little or no maintenance required. You get portability and accuracy in one package.

Accessories: Ionic Strength Adjusting Solution (ISA) adjusts the pH of standards and samples used in ammonia measurements. Ammonia Standard Solutions; 0.1 M ammonium chloride or 1,000 ppm as N. Replacement Membranes or Membrane Caps; Loose membranes for probes with O-Ring membrane holder;…

The Orion ROSS® pH electrode, which is recognized as the best pH electrode in the world for difficult samples, is now even better. The Orion ROSS® Ultra has twice the warranty and greater stability than its predecessor. It uses a unique reference system developed by Thermo Scientific that offers…

Calibration solution (4153R53) does not contain hazardous chemicals, is stable for up to one year (unopened) and can be used directly from the bottle with no mixing or diluting.

Designed to meet the demanding needs of drinking water and wastewater applications Accurate results down to 0.01 ppm Linear electrode response down to low detection limits Response time of 1 minute in sample concentrations of 1 ppm and higher New wastewater applications developed…

4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. …

Electrode holders and stands Electrode holders and stands permit one-handed operation of electrode movement Four-position holders allow simultaneous use of pH or ISE electrode and reference half cell Swing arm stand (0732H82) allows flexible movement of electrodes. Holder…

Use Thermo Scientific™ Orion™ pH Electrode Filling Solution with pH electrodes and reference electrodes. Packaged as five 2 oz. (5 x 60mL) bottles.

Free of lead and mercury unlike many pH electrodes allowing easy disposal Meets all RoHS requirements Durable plastic body that can be used under rugged conditions Waterproof BNC connector is impervious to water Orion green electrodes offer a lab or field pH electrode that…

pH and temperature measurement with one electrode Versatile with chemically compatible glass body, refillable with ROSS 3M KCL solution or a fill solution compatible to your sample type Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and…

Orion Automatic Temperature Compensation (ATC) probes transmit a signal to the pH meter, which automatically corrects pH measurements for variation in electrode slope due to temperature change.

Immersion depth is 1 mm and requires only 0.5 mL of sample. pH range is 0-14. Temperature range: -5 to 100°C. Dimensions: 120 mm x 6 mm; tip diameter: 1.3 mm. Type reference: Ag/Ag/Cl.

Measure the pH of virtually any sample with these Thermo Scientific Orion pH electrodes. Electrodes come with a low cost epoxy body Sealed, gel-filled design means there is little electrode maintenance to perform Single-junction reference means electrodes are suited to most general…

Waterproof connector pH range: 0-14 Temperature range: 0-90°C Designed specifically for use with Thermo Orion’s 260A and 265A pH meters. Sealed epoxy body with Ag/AgCl reference. Dimensions: 110 mm x 12 mm.

Ensures that the pH electrode works properly after prolonged storage, overnight storage and between samples. 5 x 2 oz. (5 x 60mL), ready to use bottles

Low maintenance and refillable electrodes that features an isolated Ag/AgCl reference system, so silver does not make contact with the sample.

Storage bottle for protecting electrodes between uses. For use with Glass body 12mm electrode

4210N68 Requires Thomas number 4215F60 reference electrode. Includes 760 mm lead. Uses Orion 900002 fill solution, order as 4215F70. Accessories Chloride Standard, 0.1000 ±0.0005M Chloride Standard, 100.0 ±0.5 ppm Ionic Adjustment Solution, Sodium Nitrate…

ATC probes will measure the temperature of your sample quickly and accurately. They are extremely durable. There are a variety of options available to you to use depending on your application. The connector must be compatible with the meter you are using. General purpose ATC probe with an…

Thermo Scientific Orion filling solutions for use with pH electrodes and reference electrodes. Filling solutions are packaged as five 2 oz. (5 x 60mL) bottles.

All the consumables you need for Ammonia analysis in wastewater management Chemical composition of the wastewater is carefully measured both as it enters treatment and before it is released into public rivers, lakes and the oceans. In the U.S., wastewater is regulated by the Environmental…

The Orion No Cal electrode will hold its calibration to ± 0.10 pH unit for one year, as long as the simple storage and care requirements are met. These electrodes utilize a unique reference system that allows for quick and accurate measurement of pH in the field. Just take it out of its…

The Orion ROSS® micro pH electrode is specifically designed to measure small samples. This unique design offers greater durability than conventional micro pH electrodes while providing all the performance benefits of a ROSS® electrode. The refillable glass ROSS micro pH electrode is compatible with…

The Orion 9179BNMD and Orion 9180BNMD consist of a platinum redox sensor, a silver/silver chloride internal reference systems and a built-in thermistor for Automatic Temperature Compensation (ATC). Both models have the capability to measure ORP and Temperature simultaneously without a separate…

The Orion 8411BN ROSS™ Sodium and Orion 8611BNWP ROSS Sodium Combination Electrodes allow sodium in aqueous solutions to be measured quickly, accurately, and economically. With its unique redox internal system, the ROSS electrode provides faster response, greater stability and accuracy than…