Electrode holders and stands Electrode holders and stands permit one-handed operation of electrode movement Four-position holders allow simultaneous use of pH or ISE electrode and reference half cell Swing arm stand (0732H82) allows flexible movement of electrodes. Holder…

Specifically for Thermo Orion A+ series meters Enables use of any BNC type electrode without temperature sensor (triode) to take advantage of meter’s automatic temperature compensation.

Adapters for the Orion 3-, 4-, and 5-Star Series meters.

4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. …

4210S12 Polymer membrane electrodes measure nitrate concentration in the range of 14,000 to 0.1 ppm in soils, plant materials, fertilizers, pickling baths and other aqueous solutions. Other uses listed in Standard Methods. EPA approved for NIPDWR compliance monitoring Optimal temperature range…

Sample well water, rain water, distilled/deionized water, boiler feed water, process water and more with the Thermo Scientific™ Orion™ pHISA™ Adjustor. It offers fast, accurate pH results in high purity and low ionic strength waters. Increases measurement accuracy …

Superior stability pH range 0-14 Temperature of 0°-100°C 3 M KCl filling solution supplied with electrode

Calibration solution (4153R53) does not contain hazardous chemicals, is stable for up to one year (unopened) and can be used directly from the bottle with no mixing or diluting.

The Orion ROSS® pH electrode, which is recognized as the best pH electrode in the world for difficult samples, is now even better. The Orion ROSS® Ultra has twice the warranty and greater stability than its predecessor. It uses a unique reference system developed by Thermo Scientific that offers…

Accessories: Ionic Strength Adjusting Solution (ISA) adjusts the pH of standards and samples used in ammonia measurements. Ammonia Standard Solutions; 0.1 M ammonium chloride or 1,000 ppm as N. Replacement Membranes or Membrane Caps; Loose membranes for probes with O-Ring membrane holder;…

Ross® Sure-Flow Easy cleaning in waste-waters, food samples, colloids, soils and slurries Has optimum flow rate for high purity waters, drinking waters and buffers Produces fast, stable responses in samples that vary in temperature pH range is 0-14 over a temperature range of…

Orion Triode 3-in-1 Probe is a practical solution for field and plant use. The pH/Reference/ATC probes are all in one body. It's non-refillable, little or no maintenance required. You get portability and accuracy in one package.

Immersion depth is 1 mm and requires only 0.5 mL of sample. pH range is 0-14. Temperature range: -5 to 100°C. Dimensions: 120 mm x 6 mm; tip diameter: 1.3 mm. Type reference: Ag/Ag/Cl.

Designed to meet the demanding needs of drinking water and wastewater applications Accurate results down to 0.01 ppm Linear electrode response down to low detection limits Response time of 1 minute in sample concentrations of 1 ppm and higher New wastewater applications developed…

Filling Solution for pHuture pH Electrodes.

Ideal for field, plant, or educational applications Connector type: BNC Waterproof

Immersion depth is 2 mm, designed for NMR cells. pH range is 0-14. Temperature range is -5 to 100°C. Dimensions: 228 mm x 2.5 mm; tip diameter: 2.5 mm. Type reference: Ag/AgCl.

Automatically correct pH measurements for variation in electrode slope due to temperature change using Thermo Scientific™ Orion™ Stainless-Steel Automatic Temperature Compensation (ATC) Probes. Stainless-steel body For A+ series meters

Triode, gel-filled combination electrode with epoxy body for durability Waterproof E DIN connection with a 1 m cable and banana plug connectors Measures pH and temperature with built-in ATC Ag/AgCl (silver/silver chloride) electrolyte for less noise than gold or silver electrodes pH…

Measure the pH of virtually any sample with these Thermo Scientific Orion pH electrodes. Electrodes come with a low cost epoxy body Sealed, gel-filled design means there is little electrode maintenance to perform Single-junction reference means electrodes are suited to most general…

Orion Automatic Temperature Compensation (ATC) probes transmit a signal to the pH meter, which automatically corrects pH measurements for variation in electrode slope due to temperature change.

Ideal for all routine pH measurements. A large variety of quality electrodes for a wide range of applications. Includes specialty pH electrodes for unique or challenging pH measurements.

The Orion 9179BNMD and Orion 9180BNMD consist of a platinum redox sensor, a silver/silver chloride internal reference systems and a built-in thermistor for Automatic Temperature Compensation (ATC). Both models have the capability to measure ORP and Temperature simultaneously without a separate…

4210F12 For determination of fluoride ion activity in concentrations from saturated to 10 -6 M (0.02 ppm) Method approved by ASTM for water, drinking water, wastewater and seawater brines and it is approved by EPA, Standard Methods and AOAC for feeds Range saturated to 0.02 ppm Requires…

ATC probes will measure the temperature of your sample quickly and accurately. They are extremely durable. There are a variety of options available to you to use depending on your application. The connector must be compatible with the meter you are using. General purpose ATC probe with an…

Orion ISE Reconditioning Solution for Sodium Electrode. 475mL (1 pt.)

Provides superior measurement stability, faster response, greater accuracy, longer life and more reproducible results when incorporated in ROSS electrodes. pH range: 0 to 14 Temperature range: 0° to 100°C ROSS® Internal reference Ceramic Junction 0.01 pH…

Model 97-19, Plastic Membrane, Sure-Flow, Combination ISE Optimal temperature range 0 to 40° C Polymer membrane electrode measures potassium in aqueous solutions from 39,000 to 0.04 ppm. Includes easily replaced cat no. 971901 plastic membrane electrode modules and 60 mL of refill…

Keep chloride analyzers well-supplied and ready for use with the Thermo Scientific™ Kits and Accessories for Orion™ 2117XP Chloride Analyzers. Choose from the reagent-less consumables kit, reagent bottle adapter, chloride calibration kit or electrode kit.

Thermo Orion IonPlus Handle with BNC Waterproof Connector For Ion+ ISE combination plastic membrane electrodes Accessories for solid state and plastic membrane ion selective electrodes Electrodes handles are used with plastic membrane combination or half cell electrodes Polishing strips…

Waterproof connector pH range: 0-14 Temperature range: 0-90°C Designed specifically for use with Thermo Orion’s 260A and 265A pH meters. Sealed epoxy body with Ag/AgCl reference. Dimensions: 110 mm x 12 mm.

The Orion No Cal electrode will hold its calibration to ± 0.10 pH unit for one year, as long as the simple storage and care requirements are met. These electrodes utilize a unique reference system that allows for quick and accurate measurement of pH in the field. Just take it out of its…