Electrodes

Compare Tool

Select up to 3 products

HomeAll Products

Electrodes

33 - 64 of 356
Sort
View
Show

Sensorex

  • PlatinumLINE Electrodes

    Sartorius

    Fast and accurate results with high quality materials, low resistance A type glass membrane or unique Platinum junctions with patented Ag/AgCl reference system. Notes: pH is BNC connection. ATC is 2.5 mm connection. Cable length is 1.5 mm.

  • Orion Economy Series pH Combination Electrode, 0 to 12 pH

    Thermo Scientific Orion

    Permanently gelled Ag/AgCl electrolyte 0 to 12 pH range 0° to 80°C (32° to 176°F) temperature range Wick junction 5.93 in. long (15cm) x 0.25 in. diameter (6mm) body, 0.18 in. diameter (10mm) cap BNC Connector A routine wick junction, gel-filled pH measurement…

  • Orion Electrode Storage Bottle, 3 Pk

    Thermo Scientific Orion

    Storage bottle for protecting electrodes between uses. For use with Glass body 12mm electrode

  • ISE-08 Sodium Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-08 Sodium Ion-Selective Electrode (ISE) is an affordable laboratory or field electrode offering good performance and longevity for Sodium analysis in many water applications like food & beverage analysis. Specifications: Sensor Type: Solid State (glass membrane) …

  • High Performance Ammonia Electrode and Reagent Kit

    Thermo Scientific Orion

    All the consumables you need for Ammonia analysis in wastewater management Chemical composition of the wastewater is carefully measured both as it enters treatment and before it is released into public rivers, lakes and the oceans. In the U.S., wastewater is regulated by the Environmental…

  • CC-03 Glass Conductivity Electrode, K=1

    labForce (a Thomas Scientific Brand)

    The labForce CC-03 Conductivity Electrode (K=1.0) is designed for high-accuracy laboratory conductivity measurements. Its cavity structure and platinum chip sensor design enhance the accuracy and stability of conductivity measurement in the range of 0 to 200mS/cm. The glass body is resistant to all…

  • Fluoride Electrode and Reagent Kits

    Thermo Scientific Orion

    All the consumables you need for Fluoride analysis Orion Combination Fluoride ISE features the Thermo™ Scientific™ Orion™ Sure-Flow™ junction which contributes to highly stable and precise fluoride measurements while simplifying electrode maintenance 0.5, 1.0,…

  • TruLine Laboratory Electrode Kits

    YSI

    Never before has YSI offered ISEs for the lab, but this expansive line of electrodes is designed to meet the needs of customers who measure effective ion concentration in applications such as wastewater, drinking water, environmental testing, and the food/beverage industry. There are 15…

  • ISE-03 Silver Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-03 Silver Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Silver analysis performance for many water applications. Specifications: Sensor Type: Solid State Range: 0.01-107,900 ppm Sample pH…

  • Sensor Cap Replacement Kit

    Hach

    Replacement sensor cap and iButton for IntelliCAL LBOD101 optical dissolved oxygen probe. The LBOD101 measures the dissolved oxygen for BOD (Biochemical Oxygen Demand) determination in BOD bottles in BOD5 testing applications. Accurate Easy to Use Rugged and Durable Flexible

  • Economy pH Electrodes

    Thermo Scientific Orion

    Ideal for field, plant, or educational applications Connector type: BNC Waterproof

  • ROSS PerpHect pH Electrode

    Thermo Scientific Orion

    The Orion ROSS® micro pH electrode is specifically designed to measure small samples. This unique design offers greater durability than conventional micro pH electrodes while providing all the performance benefits of a ROSS® electrode. The refillable glass ROSS micro pH electrode is compatible with…

  • Standard Ammonia Electrode and Reagent Kit

    Thermo Scientific Orion

    All the consumables you need for Ammonia analysis in wastewater management Chemical composition of the wastewater is carefully measured both as it enters treatment and before it is released into public rivers, lakes and the oceans. In the U.S., wastewater is regulated by the Environmental…

  • pHE-06 Premium Glass pH Electrode

    labForce (a Thomas Scientific Brand)

    The labForce pHE-06 3-in-1 pH/Temp electrode sensor is a temperature compensated pH Electrode, designed for viscous and low ion concentration samples' pH testing, and ideal for titration. The electrode is compatible with TRIS buffer solutions. The moveable sleeve junction on the pHE-06…

  • Fluoride Ion Electrode

    Thermo Scientific Orion

    4210F12 For determination of fluoride ion activity in concentrations from saturated to 10 -6 M (0.02 ppm) Method approved by ASTM for water, drinking water, wastewater and seawater brines and it is approved by EPA, Standard Methods and AOAC for feeds Range saturated to 0.02 ppm Requires…

  • pH2000 Extended Life Laboratory pH Sensor

    Sensorex

    The pH2000 has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants, low maintenance sealed gel reference design, durable Ultem® body.

  • Refillable Probe Double Junc

    Nico Scientific

  • General Purpose Epoxy-Body ORP Electrode

    Oakton

    The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature. Combine…

  • Thomas Brand Fluoride Ion Electrodes

    Thomas®

    Solid State Technology Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included with the electrode. Thomas also offers a half-cell version that…

  • pH Electrodes

    Sartorius

    pH electrodes for pH-measurement systems. Choose between long lasting fluid electrolytes with sophisticated measuring performance and easy-to-operate gel electrodes. Intelligent electrodes save the calibration data and thus assures full GLP compliance. pH-electrodes with integrated temperature…

  • ATC Probes

    Thermo Scientific Orion

    Orion Automatic Temperature Compensation (ATC) probes transmit a signal to the pH meter, which automatically corrects pH measurements for variation in electrode slope due to temperature change.

  • pHE-08 Micro pH Electrode

    labForce (a Thomas Scientific Brand)

    The labForce pHE-08 Semi-Micro Electrode is a general purpose, lab or field electrode offering affordable, low maintenance performance for applications needing a small diameter body housing (6mm) and is also longer than standard (150mm). Features: Plastic body with 6mm diameter and 150mm…

  • InLab® pH Electrode S7 Connector Cables

    Mettler Toledo

    pH Electrode Connector Cables, compatible with Mettler Toledo pH meters.

  • CC-02 Conductivity Electrode, K=10

    labForce (a Thomas Scientific Brand)

    The labForce CC-02 Conductivity Electrode is designed for high-range conductivity measurement (up to 2,000 MS/cm, K=10.0). Its unique sensor ring coated allows the electrode stable and accurate measurement in high range conductivity. The built-in thermistor tests temperature simultaneously and…

  • ISE-04 Nitrate Ion-Selective Electrode

    labForce (a Thomas Scientific Brand)

    The labForce ISE-04 Nitrate Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance nitrate analysis performance for many water applications such as drinking water, agriculture applications and food/beverage. Specifications: …

  • Thomas Brand Lead Ion Electrodes

    Thomas®

    Solid State Technology Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included with the electrode. Thomas also offers a half-cell version that…

  • TRUEscience DO Starter Set

    TRUEscience

    TRUEscience grey smart cap supplied with galvanic dissolved oxygen electrode. Also requires compatible Android device or can be added to an existing kit for measuring multiple samples simultaneously. 1x smart pH cap with beaker clip and temperature sensor attached 1x TRUEscience…

  • WTW Conductivity Cells

    WTW

    WTW offers decades of expertise in high quality, rugged conductivity cell technology, and now the new IDS conductivity cells build upon this proven technology including the automatic transfer of the cell constant feature to eliminate operation errors. Two models are available to cover the entire…

  • pHE-07 Premium Flat pH Electrode

    labForce (a Thomas Scientific Brand)

    The labForce pHE-07 Flat pH Electrode is a general purpose, lab or field electrode offering affordable, low maintenance performance for water applications where a flat shaped pH sensor is more suitable. Features: Plastic body with standard 12mm diameter and 120mm length. Flat pH…

  • IntelliCAL™ PHC101 Rugged Gel Filled pH Electrode

    Hach

    IntelliCAL™ PHC101 is a digital, combination pH probe with a non-refillable, gel-filled double junction reference and built-in temperature sensor. The rugged version is available with a 5, 10, 15, or 30 meter cable and is intended for field use. The PHC101 is ideal for measuring pH in…

  • Orion 2 Electrode Conductivity Cells

    Thermo Scientific Orion

    The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

  • Flow-Through Vessels

    WTW

    Flow vessels for WTW conductivity measuring cells are perfectly designed to perform measurements without the interference of carbon dioxide through the air or to examine the conductivity of solutions in closed circuits. Important: The overpressure in the system must not exceed 0.5 bar.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.