Electrodes

Compare Tool

Select up to 3 products

HomeAll Products

Electrodes

1 - 32 of 248
Sort
View
Show
  • Orion Ion Selective Electrodes (ISE)

    Thermo Scientific Orion

    Measurements using an ion selective electrode (ISE) are applicable in virtually every laboratory. ISEs can be used to measure ion concentrations in water, food, pharmaceuticals and biological samples. Ion selective electrodes can be used as endpoint indicators or to perform direct measurement and…

  • PlatinumLINE Electrodes

    Sartorius

    Fast and accurate results with high quality materials, low resistance A type glass membrane or unique Platinum junctions with patented Ag/AgCl reference system. Notes: pH is BNC connection. ATC is 2.5 mm connection. Cable length is 1.5 mm.

  • Combination pH Electrodes

    Corning

    General Purpose pH Combination (4136L21) AgCl internal reference sealed by ion exchange barrier pH range 0-14 at temperatures from 0° to 100°C Replaceable junction Plastic body 13 mm diameter x 138 mm long. 4136L16 and L21 have removable bulb connector for easy…

  • Reference Electrodes For ISEs

    Thermo Scientific Orion

    4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. …

  • Fluoride Ion Electrode

    Thermo Scientific Orion

    4210F12 For determination of fluoride ion activity in concentrations from saturated to 10 -6 M (0.02 ppm) Method approved by ASTM for water, drinking water, wastewater and seawater brines and it is approved by EPA, Standard Methods and AOAC for feeds Range saturated to 0.02 ppm Requires…

  • High Performance Ammonia Electrode

    Thermo Scientific Orion

    Designed to meet the demanding needs of drinking water and wastewater applications Accurate results down to 0.01 ppm Linear electrode response down to low detection limits Response time of 1 minute in sample concentrations of 1 ppm and higher New wastewater applications developed…

  • InLab® Maintenance-Free pH Sensors

    Mettler Toledo

    Always Ready Well-equipped for challenging tasks. The highly robust PEEK shaft in combination with the open junction makes the InLab Expert both resilient and easy to handle. Its solid reference electrolyte requires no refilling and is always ready for use. If highest performance is expected,…

  • Combination Electrodes

    Sensorex

    Sealed Ag-AgCl Reference, Epoxy Epoxy plastic body incorporates glass electrode and sealed Ag-AgCl reference electrode in a single stem Range pH 0 to 14, 0° to 100°C Usable at pressures from 0 to 100 psig (690 kPa) Offered in choice of types, each with US Standard or…

  • Orion Electrode Storage Bottle, 3 Pk

    Thermo Scientific Orion

    Storage bottle for protecting electrodes between uses. For use with Glass body 12mm electrode

  • ROSS® Ultra Refillable Glass Triode

    Thermo Scientific Orion

    pH and temperature measurement with one electrode Versatile with chemically compatible glass body, refillable with ROSS 3M KCL solution or a fill solution compatible to your sample type Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and…

  • 3-in-1 Triode Probes

    Thermo Scientific Orion

    Orion Triode 3-in-1 Probe is a practical solution for field and plant use. The pH/Reference/ATC probes are all in one body. It's non-refillable, little or no maintenance required. You get portability and accuracy in one package.

  • Orion ROSS® 3-in-1 Triodes

    Thermo Scientific Orion

    pH and temperature measurement with one electrode Superior stability with high accuracy pH and temperature measurement Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and Seven Series meters and others which accommodate NTC30 thermisters with…

  • Ammonia Ion Electrode Accessories

    Thermo Scientific Orion

    Accessories: Ionic Strength Adjusting Solution (ISA) adjusts the pH of standards and samples used in ammonia measurements. Ammonia Standard Solutions; 0.1 M ammonium chloride or 1,000 ppm as N. Replacement Membranes or Membrane Caps; Loose membranes for probes with O-Ring membrane holder;…

  • ROSS® Sure-Flow® pH Electrodes

    Thermo Scientific Orion

    Ross® Sure-Flow Easy cleaning in waste-waters, food samples, colloids, soils and slurries Has optimum flow rate for high purity waters, drinking waters and buffers Produces fast, stable responses in samples that vary in temperature pH range is 0-14 over a temperature range of…

  • TetraCon® 325 Universal Conductivity Measuring Cells

    WTW

    Conductivity measuring cells with graphite electrodes in two and four pin models for standard measurements in aqueous solutions in the field and in the lab No measuring errors due to cable, polarization effects or changes of the electrical edge field Highest precision and linearity …

  • SenTix® pH Electrodes

    WTW

    SenTix®: Standard electrodes with gel and precision electrodes with liquid gel electrolyte for pH measurements in lab applications and in the field Maintenance-free gel reference system across the entire product life Quick repsonse time by good connection to the medium for electrodes…

  • ORP Standard

    Thermo Scientific Orion

    Calibration solution (4153R53) does not contain hazardous chemicals, is stable for up to one year (unopened) and can be used directly from the bottle with no mixing or diluting.

  • ROSS® Ultra Premium pH Electrodes

    Thermo Scientific Orion

    The Orion ROSS® pH electrode, which is recognized as the best pH electrode in the world for difficult samples, is now even better. The Orion ROSS® Ultra has twice the warranty and greater stability than its predecessor. It uses a unique reference system developed by Thermo Scientific that offers…

  • pH Electrode Stand

    Thermo Scientific Orion

    Electrode holders and stands Electrode holders and stands permit one-handed operation of electrode movement Four-position holders allow simultaneous use of pH or ISE electrode and reference half cell Swing arm stand (0732H82) allows flexible movement of electrodes. Holder…

  • ATC Probes

    Thermo Scientific Orion

    Orion Automatic Temperature Compensation (ATC) probes transmit a signal to the pH meter, which automatically corrects pH measurements for variation in electrode slope due to temperature change.

  • Optical BOD Probe

    YSI

    Smart sensor retains calibration in the probe User-replaceable, low-maintenance sensor with +1-year life 2-year warranty; reliable and serviceable, design reduces cost-of-ownership and reduces down-time Probe body tapered to fit into a standard 300 mL BOD bottle and international versions …

  • IntelliCAL™ PHC101 Standard Gel Filled pH Electrode

    Hach

    IntelliCAL™ PHC101 is a digital, combination pH probe with a non-refillable, gel-filled single-junction reference and built-in temperature sensor. The standard version of this pH probe is available with a 3 or 1 m cable and is intended for laboratory use. The PHC101 probe is ideal for…

  • IntelliCAL™ LBOD101 Luminescent/Optical Dissolved Oxygen (LDO) Probe for BOD…

    Hach

    A Breakthrough in BOD Measurement! Hach LBOD IntelliCAL™ probe uses patented LDO® technology to deliver superior confidence in results. IntelliCAL™ LBOD101 is the latest embodiment of Hach’s patented Luminescent Dissolved Oxygen (LDO) technology. The LBOD101 is a…

  • InLab® pH Sensors for Specific Applications

    Mettler Toledo

    Accept the Challenge The measurement of solid or semi-solid samples is challenging and requires sensors that are robust, ensure proper electrolyte flow and are easy to clean. Sensors with these properties are often requested for food or cosmetic applications. A special membrane glass and…

  • Sodium Ion Electrode

    Thermo Scientific Orion

    ROSS, Half Cell ISE For determination of Na+ ion activity in concentrations from saturated to 10 -6 M (saturated to 0.02 ppm) Model 4210E63 ROSS electrode requires Thomas number 4153Q87 or 0732K95 reference electrode. Uses Orion 900004 fill solution, order as 4153F22. Accessories: Sodium…

  • Electrode Care

    Oakton

    Solutions to clean, store and fill electrodes Extend the life of your electrodes and maintain accurate readings Use cleaning and storage solution with any pH or ORP electrodes Electrode storage solution keeps pH/ORP electrode bulbs moist for faster, more accurate readings. Use…

  • Orion Gel Fill Epoxy Flat Surface Comb pH, BNC

    Thermo Scientific Orion

    Measure the pH of virtually any sample with these Thermo Scientific Orion pH electrodes. Electrodes come with a low cost epoxy body Sealed, gel-filled design means there is little electrode maintenance to perform Single-junction reference means electrodes are suited to most general…

  • Orion Redox / ORP / Temp Electrodes

    Thermo Scientific Orion

    The Orion 9179BNMD and Orion 9180BNMD consist of a platinum redox sensor, a silver/silver chloride internal reference systems and a built-in thermistor for Automatic Temperature Compensation (ATC). Both models have the capability to measure ORP and Temperature simultaneously without a separate…

  • IntelliCAL™ PHC101 Rugged Gel Filled pH Electrode

    Hach

    IntelliCAL™ PHC101 is a digital, combination pH probe with a non-refillable, gel-filled double junction reference and built-in temperature sensor. The rugged version is available with a 5, 10, 15, or 30 meter cable and is intended for field use. The PHC101 is ideal for measuring pH in…

  • Nitrate Ion Electrode

    Thermo Scientific Orion

    4210S12 Polymer membrane electrodes measure nitrate concentration in the range of 14,000 to 0.1 ppm in soils, plant materials, fertilizers, pickling baths and other aqueous solutions. Other uses listed in Standard Methods. EPA approved for NIPDWR compliance monitoring Optimal temperature range…

  • IntelliCAL™ CDC401 Standard Conductivity Probe

    Hach

    IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The standard version is available with a 3 or 1 m cable and is intended for laboratory use. The CDC401 is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.