Nitrogen Purge Cabinet, Small (1212X60) Product Dimensions (l x w x h) : 10.875x8.25x9.125in Regular nitrogen purge cabinets acrylic 10"x7"x8 1/2". Simple, easy to use at temperatures up to 120°F for use in  freezers, refrigerators, or at room temperature.…

Microscope Cover ( 1212V11 ) Product Dimensions (l x w x h) : 0x10x11.8in Round Microscope Covers: round, 10" diameter.  Rigid. Perfect for microscopes. Blocks out dust and corrosive fumes. Clear cellulose acetate with handle at top and firm aluminum bands at bottom. …

Rectangular dipping baskets. Fabricated of high-density polyethylene. Convenient rectangular shape easily fits into standard tanks.  Excellent for washing, pickling or dipping into corrosive liquids. Supplied with perforated bottoms and sides and solid ends. Additional sizes and/or solid…

"Mega Peg" drying boards and accessories. Fabricated of 1/2" polypropylene, these drying racks are perfect for the high volume laboratory. Supplied in two standard sizes but can be fabricated to fit any space requirement. Each board is supplied with the appropriate number of 5"…

Product Dimensions (l x w x h) : 0x5.69x25in Solve  the problem of washing pipettes speedily, safely and  with little effort. Dirty pipettes soak in the pipette  basket in the pipette jar and the basket is transferred  to the washer where a constant flow of tap water…

Stirring Vane For 16MM Tubes (1212Z74) Product Dimensions (l x w x h) : 0.517x0.478x0.497in Vane Bar. Polytetrafluoroethylene. Half Round for use in 16mm test tubes. Solid Polytetrafluoroethylene resin vanes with molded magnetic bars in center. Permit rotation in small conical tubes.…

Test Tube Racks. High-density polyethylene. 2 tier racks hold 10 tubes and 3 tier racks hold 12 or 24 tubes. Lightweight, unbreakable test tube rack. Molded of high density polyethylene. Will withstand  temperatures up to 110° C. Three-tier racks have legs to raise them from table.…

Automatic Slide Dispenser holds approximately 50 standard 3” x 1” (76 x 26mm) slides in transparent, dust-free container. By turning either side knob, the slides are ejected one at a time. Dimensions: 4 1/4” x 5” x 5 1/2” high

Beta Sample Storage Boxes allow for safe and easy  storage and transport of samples. Removable shelves and racks are available in many sizes to accommodate different microcentrifuge tubes. Units are designed to allow icing of samples if desired. Supplied with non-skid feet and radiation…

Round dipping baskets. High-density polyethylene fabricated dipping baskets are made with 1/8" thick walls, 3/16” diameter perforations on 5/16" centers. Made from high density polyethylene. Takes 140°F on a continuous basis or more for shorter periods (up to 160°F).…

Product Dimensions (l x w x h) : 1.263x1.013x0.094in Synthetic sponge with a calibrated porosity that can be easily inserted into the tissue embedding cassettes. Very useful for small specimens in biopsy tests.  

Standard taper size reusable Teflon joint sleeves. Unique manufacturing process permits superior quality Teflon _® joint sleeves at unbelievably low prices. Price permits disposability! Elongated cones of micro-thin virgin PTFE film tapered to fit snugly around glass joints.…

Product Dimensions (l x w x h) : 2.048x1.386x0.433in Interior dimensions: 0.90" x 1.4" Made of stainless steel for easy removal of paraffin inclusions: they allow a precise location of the specimen into the paraffin.  

Product Dimensions (l x w x h) : 0x9.5x25.75in Solve  the problem of washing pipettes speedily, safely and with little effort. Dirty pipettes soak in the pipette basket in the pipette jar and the basket is transferred  to the washer where a constant flow of tap water rinses…

Product Dimensions (l x w x h) : 1.6x1.1x0.27in Embedding cassettes for paraffin inclusions, Universal type, provided with clip on closure lid that can  easily be removed. They are available in six colors and delivered in boxes of 500 pieces and cases of 2000 pieces. Available in the…

Product Dimensions (l x w x h) : 13.75x12.75x29in Solve  the problem of washing pipettes speedily, safely and  with little effort. Dirty pipettes soak in the pipette  basket in the pipette jar and the basket is transferred  to the washer where a constant flow of tap…

Desiccator Plate 141 mm Product Dimensions (l x w x h) : 0x5.55x0.25in Polyproplene Desiccator plates fits item (3756D10).   Desiccator Plate 190 mm Product Dimensions (l x w x h) : 0x7.5x0.25in Polyproplene Desiccator plates fits item (3756D20).   Desiccator…

Shelf Only For 1.5 ML Tubes (1212Y09) Product Dimensions (l x w x h) : 8x4x2.25in Removable shelves available for use with 1.5 ml tubes on (1212Y14) shield.   Shelf Only For 0.5 ML Tubes (1212Y10) Product Dimensions (l x w x h) : 8x4x2.25in Removable shelves…

Product Dimensions (l x w x h) : 0x2.102x8in Comfortable - simple to use Precise pipetting - use with glass or plastic volumetric  and graduated pipettes from 0.1 to 100mL Blow out feature Uses protective/replaceable syringe filter Easy to take apart and clean…

Low density polyethylene bottles with polyethylene dropper closure with captive cap. Supplied capped in shrink-wrapped packs of ten. Maximum temperature for low density polyethylene is 80°C.

Sterilizing Tote Boxes, molded of natural polypropylene. Suitable for food use. These tote boxes are chemically resistant to acids, alkalies, oils and detergents and will  not rust or corrode. Can be nested when stored. Available in three different colors: Natural, White or Gray. Gray Tote Box…

Parafilm ® Dispenser/Cutter, available in clear and smoke acrylic. Acrylic dispenser provides dust-free storage and serrated cutting surface for easy dispensing of 4" Parafilm ® rolls. The smoke colored acrylic helps prevent film from yellowing and is easy to clean.  

Star Bar Stirring Heads. True paddle configuration in each magnetic polytetrafluoroethylene stirring head. Excellent mixing at slow speeds for biological applications. Features larger vortex for more complete mixing. High strength Alnico-V magnet for maximum coupling. Autoclavable.

Product Dimensions (l x w x h) : 1.6x1.1x0.439in Embedding rings for use with Large Tissue Embedding Cassettes #3027 series (1212Y53) . They are available in five colors and are delivered in cases of 500 pieces: White (000W), Blue (000B), Yellow (000Y), Green (000G) & Pink (000P).

Heavy wall, wide mouth Polytetrafluoroethylene screws closure with machine finish for ease in cleaning. Virtually immune to chemical attack, only attacked by some fluorine containing compounds at high temperature and molten alkalis metals. Working temperature range is from cryogenic to 260°C.…

Product Dimensions (l x w x h) : 3.75x2x0in Buchner funnels. Molded of polypropylene; these funnels are unbreakable and resistant to corrosion and heat, and easily separated for cleaning. Can be used without risk with Erlenmeyer flasks. Optional disks for funnels sold separately. Molded of…

Product Dimensions (l x w x h) : 5.5x0.25x0in Indelible Marker Pen for use with Azlon Wash Bottles.  

Stirring Rod Steel Core 10" (1212Z15) Product Dimensions (l x w x h) : 9.875x0.238x0in Stirring Rods: rounded ends, steel core 250 MM length. The steel core can be bent into a permanent shape. Polytetrafluoroethylene is inert and will not scratch, use up to 280ºC.…

Complete Sample Cup Storage Unit (1212X90) Product Dimensions (l x w x h) : 16x21x18in Sample cup storage cabinet is fabricated of 1/4 inch white acrylic and features 16 storage compartments. Each will accommodate one of the 200 place Sample Cup Racks which are fabricated from 3/16…

Round dipping baskets. Polypropylene. Supplied with sturdy swinging handle-a unique feature allowing easy storage and loading. All have perforated bottoms.  Polypropylene fabricated dipping baskets withstands 180°F on a continuous basis or up to 200°F for shorter periods. Excellent…

Dippers. Totally inert and non-contaminating. Extendible screw-in shafts have a steel core for rigidity and are fully encapsulated in Polytetrafluoroethylene. The basic unit consists of a beaker with a single 24" (600mm) shaft.   Replacement Handle Polytetrafluoroethylene Dipper …

Cutting boards. High-density Polyethylene. White, easy-to-clean surface. Provides excellent surface for examining specimens, cutting, dissecting, etc. NSF, FDA and USDA approved material.