1,100 lb. capacity legs extended; 650 lb. capacity legs retracted Ergonomic solution for lifting, transporting, and placing drums on spill pallets. No need for the operator to touch the drum to raise, transport and lower 1,100 lb capacity hydraulic jack for lifting steel, poly and…

1,000 lb Capacity No Brake SCH chime hook Front wheels: 12" Pneumatic, Steel Hub Back wheels: 6" Polyurethane 60" H x 26" 54 lb weight

1000 lb lift capacity Floor locks, safety screen and foot guard are standard on all models Front phenolic wheels are 5" diameter Rear phenolic swivel casters are 4" diameter Hydraulic jack manufactured by WESCO in U.S.A. 24" x 24" heavy gauge platform with…

Features: New 11" lowered height models Folding handle lays flat on table top Chrome plated handle and foot pedal Lever release handle Moldon polyurethane wheels with locking swivel casters Foot operated pump

Front tip of nose plate touches floor Foot operated hydraulic pump raises platform, foot release lowers platform Wheel lock standard All 54" lifts are 60.5" O.A.H. 8"x2" wheels with .75" ball bearings.

Meets ASME B56.10 specifications 1,000 lb. lift capacity Remote control, floor lock, and safety screen are standard on all models With a minimally charged battery, unit can be used while recharging Easy to read illuminated battery status voltmeter Applications include: …

Wesco's Stability Advantage. By design, Wesco casters are mounted past the dolly and drum rim. Our casters are mounted further apart than standard designs with casters completely underneath the drum and closer together. The further the casters are apart the greater the stability. Welded…

1,000 lb Capacity SCH chime hook Front wheels: 10" Moldon Rubber, Aluminum Hub Back wheels: 6" Polyurethane 60" H x 26" 60 lb weight

Standard lift height 30" - 48" 10 gauge steel top Foot operated Precision telescoping guide tubes 4 swivel 5" diameter steel wheels 2 floor locks

Safety chain helps secure load 3 positions: 2 wheel, 4 wheel tilt and 4 wheel storage Easy conversion between all 3 modes using springloaded position lock mechanism 8" moldon rubber wheels, 3" swivel casters Holds cylinders up to 9 1/4" diameter Noseplate 16 7/8"…

1/4" reinforced steel top and base 2 rigid and 2 swivel 5" diameter steel wheels and 1 floor lock Precision telescoping guide tubes.

1 year pump warranty 12 volt battery charger included 10-12 second lift time unloaded Overload bypass Polyurethane wheels 180° steering radius Comfort coated handles 6 1/2" wide forks 6" moldon polyurethane steering wheels 3" moldon polyurethane…

Fixed handle Chrome plated handle and foot pedal Lever release handle 5" x 1.5" moldon polyurethane wheels with locking swivel casters Foot operated pump

U.S. patent no. 411,679 Space saving folding design. Fits into small storage spaces or car trunks Elastic straps for securing load Aluminum or steel construction Non-marking, shock absorbing, rubber tread tires.

Oversized 63" long by 32" wide table top accommodates large cargo Two locking swivel casters - 5" x 1½" moldon polyurethane Two 5" x 1½" moldon polyurethane casters Handle height - 38" Hydraulic foot pump Safety bars

Weight: 3.4 lb. Dimensions: 11.75" x 2" x 14"

500 lb. maximum capacity, evenly distributed load Optional 3rd shelf Shipped KD, boxed, and includes 5" non-marking casters Very economical

1 year pump warranty Manual lift, power drive Lowered/raised fork eight: 3.375" / 8" 10" polyurethane drive wheel 3" polyurethane load wheels Speed: 1.6 - 2.4 mph with load 4 batteries - 24V 38Ah 12V 10 amp charger 67" turning radius

61" O.A.H. / 23.75" O.A.W. / 17.5" O.A.D Steel drums only An industry standard Floating axle reduces effort required to break over and balance load Easiest drum truck for one person to use Chime hook can be stored at the top of the frame for easy use …

Ergonomic European style handle Corner bumpers

This combination drum hand truck/cradle allows one man to load, transport, and drain 55 or 30 gallon drums Equipped with (4) non-sparking rollers on the frame that allow drum spigot to be rotated into position for dispensing All four moldon rubber wheels support the weight of drum for…

U.S. Patent No. 9,302,688 UPSable - KD and boxed Six models: (4) Steel and (2) 304 Stainless Steel Construction Handles 30, 55, and 85 gallon drums Models to handle steel and poly drums Requires minimal assembly All parts removable and interchangeable Each of the six models…

Utility of a hand truck & drum truck Chime hook works with 55 and 30 gallon drums Curved frame holds 5-gallon pails and kegs With noseplate resting flat on floor, 18" to center of lowered chime hook Noseplate 7.812" D x 14" W. 304 stainless steel 8"…

3" nylon load (WHL-2) and 8" nylon steering (WHL-1) wheels 304 stainless steel construction, except for 316 stainless forks

Economical and convient way to tip, drain and store 55 gallon drums Easy for one person to use Ships KD and boxed, Quick and easy assembly Self storing load tipping lever 600 lb capacity 32.5 long x 19.5 wide, 15 drum distance to floor Inboard polyolefin wheels

Extra large - 20"W x 7½" deep noseplate Quick release latch for easy conversion from 2-wheel to 4-wheel mode Steel frame aluminum handle

Welded frame and handles for maximum strength Non-marking grey vinyl on all contact surfaces securely mounted to truck 2" wide heavy duty web belt Retractable moldon rubber casters (3.5" diameter) help support load Heavy duty 8" cast iron center moldon rubber wheels…

ADJ models feature all welded steel construction for durability ADJ units can be used on either 30 or 55 gallon steel drums Cost effective way to move 55 and or 30 gallon steel drums 5.5 x 2 fork pocket ID 1,500 lb capacity Handles one 55 or 30 gallon drum at a time

Value priced truck Aluminum construction 3 Positions: Vertical - 2 wheel 45° - 4 wheel Platform - 4 wheel 18" x 7.5" cast aluminum noseplate 7.5" W x 27" L recessed folding nose extension Handle height 48" …

Industrial strength heavy duty schedule 40 pipe frame construction Ribbed cross braces for extra strength All joints double welded 8" deep by 14" wide nose is 7 gauge thick plate with machined beveled edge and radiused corners for safety Zinc plated Auto-Loc® axles…

Meets ASME B56.10 specifications Instant carriage stop for accuracy– no drifting Adjustable forks Heavy duty rigid frame and base Double chain lift for better balance and load support Heavy-duty pump. Ergonomic “D” handles High strength mast for increased stability

1 year pump warranty Moldon polyurethane wheels 180º steering arc Loop handles with inside hand control Closed pallets must be placed on top of forks 6 1/2" wide forks 6" moldon polyurethane steering wheels 3" moldon polyurethane load wheels