Chemglass Lab Condensers
-
Reflux condenser similar to CG-1213 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two GL-14…
-
West Condensers
ChemglassNarrow annular space between jacket and inner tube of the West condenser provides for excellent cooling efficiency due to the increased flow rate of water. Condenser has a top standard taper outer joint and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Reflux Condensers, Coil Type
ChemglassReflux condenser with the coolant circulated through the inner coil instead of through the jacket as in the Graham style condenser. Condenser has standard taper top outer and lower inner drip tip joints. Hose connections have an O.D. of 10mm at the middle serration.
-
CONDENSERSS, AIR REFLUX, MINUM-WARE® CONDENSERSS, WATER-JACKETED, REFLUX, MINUM-WARE® ADAPTERS, CLAISEN HEAD, MINUM-WARE®, Supplied complete with open-top screw cap (MW-102-22) and PTFE faced silicone septa (MW-104-12). HICKMAN STILL HEADS, MINUM-WARE®
-
Condenser, "B" Assembly
ChemglassDouble coil condenser for use with rotary evaporators for cooling with tap water in a vertical position. Condenser has a 45/40 lower inner drip tip joint, a 29/32 top outer joint, and removable hose connections using GL-14 glass threads. Condenser is supplied complete with plastic caps and serrated…
-
Micro Cold Finger Condensers
ChemglassCondenser for use in refluxing from 1 to 20mL of solvent in flasks having a capacity of 5 to 50mL. Minimal surface area provides for better yields while providing adequate cooling. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Top hose connection…
-
Coil Condenser, "A" Assembly
ChemglassDouble coil condenser for use with rotary evaporators for cooling with tap water in a diagonal position. Condenser has a 50mm O.D. flange at the bottom, a 19/38 top valve, and removable hose connections using GL-14 glass threads. Condenser is supplied complete with plastic caps and serrated hose connections.
-
Liebig Condensers
ChemglassSmall scale Liebig condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Glassblowers Friedrich Condenser Blank
ChemglassMolded inner cold finger for use in fabrication of Friedrich style condensers. Overall length is 230mm with an outside diameter of 45mm. NOTE: TOP IS UNFINISHED.
-
Reaction Vessel
ChemglassOne-Piece Reaction Vessel, 5-Nk, 50mL: 19/22 Outer CN, (1) 10/18 Outer SN, (1) 14/20 Outer SN, and (2) 19/22 Outer SN's. Vessel is graduated from 10 to 50mL. Body outside diameter is 43mm. Equivalent to Mettler EasyMax 102/402 Part # 5116172.Mettler Easymax® is a registered trademark…
-
Condenser, Reflux
ChemglassCoil style reflux condenser with a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Jacket has a O.D. of 41mm while the coil O.D. is 8mm.…
-
Condenser, Double Coils
ChemglassHigh efficiency double coil condenser, similar to a rotary evaporator condenser but with 45/50 joints. Condenser has an O.D. of 80mm and is 400mm overall length. Coolant connections are made using removable hose connections with GL-14 threads. Supplied complete with two polypropylene hose…
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 35/20 lower ball joint, a 19/38 stopcock plug and removable hose connections using GL-14 threads.
-
Graham Condensers
ChemglassCondenser has a top standard taper outer and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Condensers, Dewar Type
ChemglassCondenser has a large opening at the top for use with dry ice/acetone or liquid nitrogen. Condenser has a lower inner drip tip joint and hose connections with an O.D. of 10mm at the middle serration. NOTE: See CG-4519 For Solvent Recovery Traps used with Rotary Evaporators.
-
Coil Condensers
ChemglassFor use in construction of spiral or Graham style CONDENSERSs. Coils can be sealed together to form longer lengths.
-
Liebig Condensers
ChemglassCondenser has a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 35/20 lower ball joint, a 19/38 stopcock plug and removable hose connections using GL-14 threads. Condenser is supplied complete with PTFE centering ring along with plastic caps and…
-
Reflux Condensers, Double Cooling
ChemglassHigh efficiency reflux condenser employs a double surface area with a cooling finger sealed into the secondary cooling jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. The jacket length is 200mm. PLEASE NOTE:…
-
Condensers, Graham, Gas Scrubber
ChemglassCondenser for use in cooling of the scrubbing fluid. Graham coil type condenser having 1/2" Swagelok® tubing for use with CG-1975-20 compression fitting. Overall length is ~350mm with effective length of 250mm. Hose connections have 9mm OD small serration and a 10mm OD large serration.
-
Allihn Condensers
ChemglassAllihn style reflux condenser with a plain tubulation at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Friedrichs Condensers
ChemglassCondenser has a specially formed spiral inner tube providing a long vapor path, ensuring good heat transfer and anti-flooding characteristics. Condenser has a standard taper outer joint at a 15° angle to the condenser and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at…
-
High Efficiency Air Condensers
ChemglassHigh efficiency air condenser is a waterless glass condenser that requires no cooling water for operation. The glass bellows design provides a high surface area air condenser which is very effective. Performance of the high efficiency air condenser is equivalent to a Liebig type condenser…
-
Condenser, ''CR'' Assembly
ChemglassTwo piece cold trap style condenser for use with rotary evaporators. Condenser has a 45/40 lower inner drip joint, a 19/38 stopcock plug, and removable hose connections using GL-14 threads. Condenser is supplied complete with PTFE centering ring along with plastic caps and serrated hose…
-
Coil Condenser Inserts, Type "C"
ChemglassInsert allows the coversion of a "C" type dry ice condenser for use with either tap water or a chilled circulator. Inlet and outlet are GL-14 threads and supplied complete with caps and detachable hose connections. Also supplied with a PTFE centering ring.
-
Reflux Condensers, Coil Type
ChemglassSimilar to CG-1213, but having a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Jacket has an O.D. of 41mm while the coil O.D. is 8mm. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and…
-
Cold Finger Condensers
ChemglassCondenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.
-
High Efficiency Condensers
ChemglassThis unique design combines some of the best features for refluxing in a single condenser. Coolant, introduced into the upper hose connection, fills a large cold finger that is wrapped with coils. After the coolant travels through the coils, it enters the water jacket to maximize cooling surface…
-
Friedrichs Condensers
ChemglassSimilar to CG-1210 but with the 24/40 outer joint replaced with a serrated hose connection for use with a drying tube. This style condenser is used primarily in Soxhlet extractions or in reflux mode. Hose connections have an O.D. of 10mm at the middle serration.
-
High Efficiency Reflux Condensers
ChemglassCompact high efficiency reflux condenser employs a double wall thimble shape bulb sealed into the outer jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. While the overall height of this condenser is only…
-
Concentrator Condensers
ChemglassVapors rise to the top of inner tube then travel downward and condense in this highly efficient concentrator. Condensate drains through the side tube which has a standard taper inner joint the same size as the lower inner uptake joint. Serrated hose connection for connecting to vacuum source. Hose…
-
Friedrichs condenser similar to CG-1210 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two…