Ace Glass Lab Condensers
-
Condenser, Coiled
Ace GlassDouble jacketed with standard taper inner and outer joint at bottom and top.
-
Condenser, Jacketed Reflux, Threaded
Ace GlassMicroscale, water-jacketed condenser used in reflux experiments. With outer joint at top externally threaded to allow an O-RING-CAP-SEAL connection with mating male joints and inner joint at bottom, with drip tip. I.D. of inner tube on code -23 is sufficiently large enough to accept regular size…
-
Condenser, Friedrichs
Ace GlassReflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.
-
Condenser, Long Path
Ace GlassTurbulent flow created makes this condenser very desirable for use under reduced pressure. Internal and external cooling surfaces result in high efficiency per unit length. Joints are standard taper 24/40.
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Condenser, Liebig, No Hold Up
Ace GlassWith standard taper or spherical joint at bottom and top. Hose connections are size D.
-
Micro cold finger condenser with drip tip on bottom for directing drops into the well of 14/10 jointed 9576 or 9599 Hickman Stills. Cold water is introduced into cold finger periodically by means of a Pasteur pipet. Complete item consists of cold finger condenser and multi- purpose vacuum adapter…
-
Condenser, Spiral
Ace GlassWith spiral condensing tube having both inlet and outlet connections at top, on same side. With joints. Length between joints is approximately 80-90 mm longer than the stated coil length. Available with PTFE clad bottom joint.
-
Condenser, Graham
Ace GlassWith standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D, for 3/8in ID tubing. con-nections are size D.
-
Condenser, Finger, with Joint
Ace GlassCold finger condenser for use with our 7756 series Schlenk reaction vessels.
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Condenser, Air Reflux
Ace GlassMicroscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…
-
Condenser, Allihn, Angled
Ace GlassBorosilicate glass Allihn style condenser except with a 45 degree angle from bottom joint. New Style saves height space vs. standard vertical condensers. Has matching top and bottom standard taper joints Hose barbs are size D glass, off side of body to
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50mm, with water cooled standard taper 24/40 inner and outer joint at bottom and top.
-
Condenser, Coiled
Ace GlassCoiled condensing tube, with 24/40 inner and outer joint at bottom and top. Available in various lengths with hose barbs or Ace-Safe connectors.
-
Condensers/Coolers, Rotary Evaporator
Ace GlassReplacement, borosilicate glass components for R220 rotary evaporators Product offering includes triple coil condensers, Bullfrog condensers and the lower condensate coolers for rotary evaporators. Available in either plain or safety coated versions. Units include black SVL caps & red GL thread…
-
Bulb type, approximately one bulb per 50 mm, with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing. For replacement connectors, see 5853.
-
Sublimation Adapter, Adjustable
Ace GlassMicroscale sublimation adapter with vertically adjustable condenser tube that allows use with 3 mL, 5 mL, and 10 mL microscale vessels. Two-piece adapter features a #7 Ace-Thred at top of vacuum adapter that, with Nylon bushing and O-Ring, forms a compression seal with condenser tube, bottom 14/10…
-
Condenser, Spiral
Ace GlassWith spiral condensing tube having both inlet and outlet connections at top, on same side. With standard taper joints. Length between joints is approximately 80-90 mm longer than the stated coil length.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and standard taper 24/40 joint at bottom. Jacket length 250mm. Hose connections are size D.
-
Condenser, Triple Coil, High Capacity
Ace GlassHigh through-put, high capacity triple coil condenser has even higher capacity than double coil or rotary evaporator type condensers. Unit is designed with three internal coils for processing large volumes of cooling water and large volumes of material
-
Condenser, Dewar Type
Ace GlassDewar type condenser for use with dry ice or other solid cooling agents. Upper tube is 12mm O.D. At bottom is standard taper 24/40 inner joint.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and joint at bottom and top. Jacket length 250mm. Available in various joint sizes with hose barbs or Ace-Safe connectors.
-
Condenser, Friedrichs, Modified
Ace GlassTop of condenser modified with #7 Ace-Thred so inlet tube is removable. This offers easier cleaning and greater economy if inlet tube breaks. With molded spiral condensing surface and 24/40 joint at bottom and top. Jacket length 250mm. Available with h
-
Condenser, Reflux, Spiral
Ace GlassSpiral coil, reflux condenser with angled top outer joint and two equal side arms with size C hose connections.
-
Condenser, Cold Finger
Ace GlassCold Finger accessory for standard distilling heads and systems. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 6606, 6609, and 6613 distillation h
-
Used with Pressure Reactors, listed in Reaction Section. Heavy wall condenser has a #15 Ace-Thred at top that can be stoppered using 5846 Plug, not supplied. Bottom drip tip is long enough to be secured in the #15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15…
-
Condenser, Cold Finger
Ace GlassCold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 con
-
No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include
-
Bulb type for use with regular extraction apparatus. Improved design permits greater condensing capacity. Jacket lengths approximately 255mm with one bulb per 50mm.
-
By closing stopcock, serves as a reflux condenser; open serves as a still head for Claisen type distillation. Top joint can be used for thermometer or cold finger condenser insertion. Side vent enables head to be used in vacuum distillation. Jacketed section 140mm.
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.