Original Hypersil columns from the manufacturer Base deactivated with minimal residual silanol activity Exceptional reproducibility Economical, general purpose columns Thermo Scientific Hypersil BDS 5µm C18 Columns are a good choice for QA/QC labs as a robust general-purpose…

A good choice for QA/QC labs as a robust, general-purpose column in applications where reproducibility and long column lifetimes are required.

The use of SPE sample preparation can significantly enhance the robustness and reliability of many biological, pharmaceutical, forensic and environmental applications. Thermo Scientific™ HyperSep C18 SPE Cartridges feature a highly retentive alkyl-bonded phase for nonpolar to moderately…

Thermo Scientific™ HOT POCKET Column Heaters, Eluent Preheater/Precooler and COOL POCKET Chiller offer column heating or cooling in a compact, efficient design. Easy to install and use with a variety of column lengths up to 300mm (up to 150mm for short HOT POCKET model) Dual…

High efficiency and proven reproducibility Exceptionally reliable Separation of a wide range of compounds including nonpolar, moderately polar and lipophilic compounds like triglycerides Thermo Scientific Hypersil ODS (C18) Columns…

Super Clean Cartridge Filters 99.9999% pure gas (or 6.0 grade) output No carrier gas line contamination during cartridge change Cost effective TUEV approved Max. pressure 11 bar (160 psi) Max. flow 7L/min.

Offer 100% porous graphitic carbon for extended separation capabilities with Thermo Scientific™ Hypercarb™ Porous Graphitic Carbon LC Columns. Enhanced retention of polar compounds and separtion of structurally related analytes with stability at pH extremes and high temperature. …

Significant reduction in peak tailing while retaining C18 selectivity Excellent resolution, efficiency and sensitvity Confidence in the accuracy and quality of analytical data Thermo Scientific Hypersil GOLD HPLC Columns are endcapped, ultrapure, silica-based columns with…

Accucore HIliC columns offer enhanced Retention of polar and hydrophilic analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with excellent resolution…

Exceptionally low bleed for optimal signal-to-noise ratio, sensitivity and mass spec integrity Non-polar, 100% dimethyl polysiloxane Equivalent to USP G2 Applications: Hydrocarbons PCBs Drugs of abuse Gasoline range organics (GRO) Refinery gases …

Thermo Scientific* Uniguard Direct-Connection Guard Cartridge Holders are reusable, stainless-steel guard cartridge holders that attach directly to the analytical column inlet—eliminating requirement for extra fittings. With PEEK 0.0625 in. male outlet that fits many columns 0.0625…

Improve the consistency and reliability of your liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C8 LC columns. High-purity, high surface area silica and dense stationary phase coverage minimize secondary interactions and deliver reproducible, high-efficiency…

The use of SPE sample preparation can significantly enhance the robustness and reliability of many biological, pharmaceutical, forensic and environmental applications. Thermo Scientific™ HyperSep C8 SPE Cartridges offer a less retentive alternative to C18 for polar and nonpolar…

Achieve repeatable and consistent liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C18 columns. Highly pure, high surface area silica and dense stationary phase coverage minimize secondary interactions and ensure robust, high-resolution separations. Double…

The GFM Pro Flowmeter is specifically designed for use with gas chromatography (GC) instruments. This versatile product is an electronic device capable of measuring volumetric flow for all types of gases. Real-time measurements can be made for various types of flow paths including continually…

Accucore C18 Defender Guard Cartridges offer easy, economical protection of the main column with minimized impact on retention or efficiency. Based on Core Enhanced Technology, Thermo Scientific Accucore columns provide fast, high-resolution separations - without the elevated backpressures required…

A wide range to cover most applications Variety of materials and temperature limits for all applications For use in Thermo Scientific TRACE and Thermo Scientific FOCUS GCs and instruments from other manufacturers Contaminant-free in individual blister packs Temperature limit: 400°C

In reversed phase, they offer different selectivity compared to C18 or C8 phases In normal phase, they are less retentive than silica columns Reliable cyano columns with long lifetimes Thermo Scientific Hypersil BDS 5µm…

High quality, base deactivated columns Unique selectivity for aromatic and slightly polar compounds Manufactured under ISO 9001:2000 conditions Thermo Scientific Hypersil BDS 5µm Phenyl Columns offer exceptional stability and…

Optimize conventional HPLC methods with Thermo Scientific™ Accucore™ XL C18 LC Columns. Rugged 4µm solid-core particles ensure very high efficiencies within standard HPLC pressure limits. The high bonded phase coverage provides optimal retention of a broad range of nonpolar…

For a high-quality, base-deactivated, fully endcapped phase with similar selectivity to C18 but slightly less retention, use Thermo Scientific™ Hypersil™ BDS C8 HPLC Columns. These economical columns feature reduced silanol activity and provide exceptional reliability for QA/QC labs.…

Wide range of choices for a wide range of instruments and applications Thermo Scientific ferrules are available in three different materials and various dimensions to match the instrument and capillary column ID. The choice of material is dependent upon the use. 15% Graphite/85% Vespel…

Excellent choice for acids, bases and neutral compounds Less retentive than C18 for faster analyses Robust columns with long column lifetimes Very reliable for routine assays Thermo Scientific Hypersil BDS…

Significant reduction in peak tailing while retaining C18 selectivity Excellent resolution, efficiency and sensitvity Confidence in the accuracy and quality of analytical data 1.9µm particle size columns can be used to improve speed and efficiency Thermo…

Resolve a wide variety of polar and nonpolar analytes with Thermo Scientific™ Acclaim™ Polar Advantage (PA) columns. These sulfonamide-embedded, reversed-phase columns provide unique selectivity and excellent peak shape for acidic, basic, and neutral analytes. In addition, the mildly…

Thermo Scientific™ TRACE TR-5MS GC Columns feature a popular GCMS phase for many applications. Nonpolar phase, 5% phenyl polysilphenylene-siloxane Low bleed and high stability High signal-to-noise for increased sensitivity High robustness to oxygen and water contamination …

Thermo Scientific™ Hypersil GOLD aQ polar endcapped C18 columns provide a controlled interaction mechanism by which polar analytes can be retained and resolved. Based on high purity silica, Hypersil GOLD is a state of the art family of columns designed to meet the challenges of modern…

Endcapped, ultrapure, silica-based columns with exceptional peak shape and resolution for HPLC and LC/MS. Thermo Scientific Hypersil GOLD C8 HPLC Columns are recommended for analytes with medium hydrophobicity or when a less hydrophobic phase is required to obtain optimum retention. Based on…

Offers 90+% resolution of the first six gases in EPA Method 8260 and EPA Method 524.2 for volatile organics analysis Low to mid-polarity phase, 6% cyanopropylphenyl/94% dimethyl polysiloxane Ideal for EPA methods 624 and 608 Allows resolution of 2-nitropropane from 1,1-dichloropropanone…