AdvanceBio RP-mAb columns are designed to optimize the performance of intact and reduced mAb analysis when analyzing monoclonal antibodies for biopharma discovery, development, and QA/QC applications. Analysis of intact and reduced monoclonal antibodies are critical measurements for characterizing…

Agilent J&W DB-5ms Ultra Inert columns deliver industry-leading analytical performance in a range of chromatographic applications. DB-5ms Ultra Inert is low bleed and features excellent signal-to-noise ratio and symmetric peak shapes, enabling high performance for challenging active analytes such…

eXtra Dense Bonding (XDB) is key to the exceptional performance of ZORBAX Eclipse XDB columns at intermediate pH. This dense bonding is accomplished by adding an extra-dense monolayer of C18, C8, phenyl, or CN-silane to the ultra-pure, fully-hydroxylated, ZORBAX Rx-silica surface. The packing is…

Bond Elut 96 round-well plates enable straightforward, rapid conversion from cartridge-based methods to the automation-friendly 96-well format. 96 round-well plates are available in various silica-based and polymeric sorbents. These plates are well suited to smaller sample volumes. Bond Elut 96…

ZORBAX RRHD Bonus-RP, 80Å, 2.1 x 100 mm, 1.8 µm, 1200 bar pressure limit, MVK, 3/pk; Method validation kit, includes three columns (p/n 858768-901) from three different lots. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent J&W DB-1ms Ultra Inert delivers consistent column inertness performance to ensure analytical sensitivity and integrity. With excellent peak shapes, exceptionally low bleed, and high signal-to-noise ratios, this column performs effectively with even the most challenging active analytes. Each…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Pursuit family of HPLC columns offers reliable performance in various common particle sizes and phase chemistries, including USP L1, USP L7, and USP L11. Pursuit columns are available in many dimensions, including preparative HPLC columns. In addition, both traditional (Pursuit) and…

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and…

The same Bondesil sorbent packed into Bond Elut cartridges is available in bulk for large-scale purification or packing custom cartridges. Bondesil bulk silica, carbon, and polymeric sorbents are designed for ultraselective chemical separation. The average particle size of Bondesil sorbents are 40…

J&W DB-5ms is a non-polar phenyl arylene polymer gas chromatography (GC) Column, virtually equivalent to (5%-phenyl)-methylpolysiloxane, featuring an excellent signal-to-noise ratio for analytical applications. This improved performance gives better sensitivity and mass spectral integrity, and…

This groundbreaking column technology is designed specifically for Agilent 5975T GC/MS systems. These modules include an integrated 3 in LTM capillary column toroid assembly with heated transfer lines, cooling fan assembly and sheet metal enclosure. Replacement column toroid assemblies are also…

AdvanceBio RP-mAb columns are designed to optimize the performance of intact and reduced mAb analysis when analyzing monoclonal antibodies for biopharma discovery, development, and QA/QC applications. Analysis of intact and reduced monoclonal antibodies are critical measurements for characterizing…

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,…

The Agilent J&W DB-HeavyWAX Polyethylene Glycol (PEG) is a high-temperature WAX column that can operate at higher maximum temperatures (280 °C isothermal, 290 °C programmed) than standard WAX columns. This allows for shorter run times, providing a lower cost per test. The column provides retention…

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,…

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W…

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W…

Agilent Polaris HPLC columns offer many polar phase chemistries designed separate mixtures of polar and nonpolar analytes reliably and with excellent peak shapes. The polar-embedded C8 and C18 bonded phases are compatible with 100% water, and offer alternative selectivities while still complying…

The Agilent Pursuit family of HPLC columns offers reliable performance in various common particle sizes and phase chemistries, including USP L1, USP L7, and USP L11. Pursuit columns are available in many dimensions, including preparative HPLC columns. In addition, both traditional (Pursuit) and…

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and…

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and…

PL-SCX strong cation-exchange materials are extremely hydrophilic and are designed for purification of biomolecules. The materials are totally polymeric and are chemically and thermally stable over a full range of HPLC conditions. The strong cation-exchange functionalities, covalently linked to a…

Agilent J&W DB-1701P is specifically designed and processed for the analysis of organochlorine pesticides. These low- to mid-polarity columns are ECD tested to ensure minimal pesticide breakdown and low ECD bleed, and operate effectively within temperature limits of -20 to 260/300 Deg C. These…

PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives…

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,…

PL-SCX strong cation-exchange materials are extremely hydrophilic and are designed for purification of biomolecules. The materials are totally polymeric and are chemically and thermally stable over a full range of HPLC conditions. The strong cation-exchange functionalities, covalently linked to a…

Bond Elut SPE cartridges range from 1 to 150 mL in a wide range of bonded silica and polymeric chemistries, sorbent particle sizes, and bed masses. The Luer-compatible Bond Elut Jr and the large reservoir capacity (LRC) tubes offer flexibility across a range of sorbent bed masses. Tabless…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Bond Elut C18 is the most hydrophobic, bonded silica sorbent in the Bond Elut range. It is the most popular SPE sorbent because of its retentive nature for nonpolar compounds. C18 is generally regarded as having the broadest spectrum of retention among bonded silica sorbents, since it retains most…