Combination phase for SPE of hydrocarbons from water acc. to DIN H53 / ISO DIS 9377-4 Features Special combination phase of sodium sulfate and Florisil® Recommended application: hydrocarbons from drinking, surface and waste waters

Matrix properties- Higher content of chlorophyll and carotinoids (pigments), Recommended application(s)-PFAS in food (e.g. milk, curd cheese, quark, bread, brussel sprouts, spinach, eggs), QuEChERS, Sample preparation

Magnesium silicate for SPE Features Matrix magnesium silicate (MgO – SiOH 15:85), high purity, particle size 150–250 µm Recommended application: organic tin compounds, aliphatic carboxylic acids, PCBs, PAHs

Special products for determination of pesticides in food samples QuEChERS method and pre-mixes Within a few years after its development by Anastassiades et al. the QuEChERS method has gained a leading position for the determination of pesticide residues in food samples by GC-MS or LC-MS,…

Polystyrene-divinylbenzene adsorbent resin for SPE Features Highly porous polystyrene-divinylbenzene copolymer specific surface 1200 m2/g, particle size 50–100 μm very high binding capacity, up to 30 % of adsorbent weight (for comparison: silica adsorbents about 3 %) …

Octadecyl modified silica phase for SPE of polar analytes Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Special octadecyl phase for polar analytes, not endcapped, carbon content 15 % Recommended…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Propylsulfonic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 propylsulfonic acid modified silica very strong cation exchanger (capacity ~ 0.7 meq/g) …

Aluminium oxide, neutral, for SPE Features Aluminium oxide, high purity, pore volume 0.90 mL/g, particle size 60–150 µm, specific surface 150 m2/g neutral, pH 7 ± 0.5

Phenyl-modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Phenyl phase, carbon content 8 %, polarity similar to C8 In addition to hydrophobic interactions more selective…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Special silica phase for SPE enrichment of drugs from urine or plasma Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 special bifunctional modification - C8 / SA (strong cation exchanger –…

Weak carboxylic acid modified polymeric cation exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 50–60 Å, particle sizes 45 µm or 85 µm (standard), very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH stability…

Ammonium – sulfonic acid modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g zwitterionic polar phase with ammonium – sulfonic acid modification, carbon content 7 %, pH stability 2-8 Polar…

For individual packing of SPE columns with CHROMABOND® adsorbents.

Special silica phase for SPE of THC and derivatives acidic analytes from biological fluids (urine, blood ...) Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 special bifunctional modification – C8 /…

Ideal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…

Spherical, hydrophobic polystyrene-divinylbenzene resin for SPE Features Hydrophobic polystyrene-divinylbenzene copolymer pH stability 1–14 High-purity material with highest reproducibility and lowest blank values due to an optimized manufacturing process Spherical particles…

Columns for gravity flow phase separation Features Automatic separation of a two-phase mixture without separation funnel Two-phase mixtures are completely applied to the column and the phase boundary is determined without further work. The special membrane automatically stops the…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Kieselguhr phase for liquid-liquid extraction Features Base material coarse-grained kieselguhr (also known as diatomaceous earth, hydromatrix, celite) large pore size, high pore volume, constantly high batch-to-batch quality pH working range 1–13 Application: …

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Ideal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Strong quat. ammonium modified polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.4 cm3/g, pH stability 1–14 …

Ideal for Flash separations from 10 mg up to 33 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…

Special silica phase for determination of pesticides in food samples Features Base material silica, pore size 60 Å, particle size 45 μm, specific surface 500 m2/g, pH stability 2–8 Primary and Secondary Amine functions (PSA), 5 % C Removes polar compounds (e.g.,…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Polar, bifunctionally modified polystyrene-divinylbenzene copolymer Features Polar modified polystyrene-divinylbenzene copolymer with a weak anion exchanger, specific surface 650–700 m2/g, particle size 80 µm, pore size 50 Å, pH stability 1–14 The Easy…

Weakly basic secondary and tertiary ammonium polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH…

Cyanopropyl modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 cyanopropyl phase, carbon content 5.5 %, polar to mid-polar In addition to weak hydrophobic interactions…