MACHEREY-NAGEL SPE Columns
-
CHROMABOND® C18 ec
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
CHROMABOND® NH2
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
CHROMABOND® Florisil®
MACHEREY-NAGELMagnesium silicate for SPE Features Matrix magnesium silicate (MgO – SiOH 15:85), high purity, particle size 150–250 µm Recommended application: organic tin compounds, aliphatic carboxylic acids, PCBs, PAHs
-
CHROMAFIX® Dry (Na2SO4)
MACHEREY-NAGELSpecial phase for drying organic samples Features Anhydrous high-purity sodium sulfate which forms Glauber’s salt with traces of water – For removal of larger quantities of water several cartridges can be combined in series. Recommended application: removal of traces of…
-
CHROMABOND® C18 Hydra
MACHEREY-NAGELOctadecyl modified silica phase for SPE of polar analytes Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Special octadecyl phase for polar analytes, not endcapped, carbon content 15 % Recommended…
-
CHROMABOND® HR-P
MACHEREY-NAGELPolystyrene-divinylbenzene adsorbent resin for SPE Features Highly porous polystyrene-divinylbenzene copolymer specific surface 1200 m2/g, particle size 50–100 μm very high binding capacity, up to 30 % of adsorbent weight (for comparison: silica adsorbents about 3 %) …
-
CHROMABOND® HR-XA
MACHEREY-NAGELStrong quat. ammonium modified polymeric anion exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 55–65 Å, particle sizes 45 µm or 85 µm (standard) very large specific surface 850 m2/g, pore volume 1.4 cm3/g, pH stability 1–14 …
-
CHROMABOND® PS
MACHEREY-NAGELPolymer-based SPE phases for RP and ion chromatography Features Base material: high purity polystyrene-divinylbenzene copolymers (PS/DVB), pore size 100 Å, particle size 100 µm very low degree of swelling, thus very well suited for chromatography reliable function…
-
CHROMABOND® Diamino
MACHEREY-NAGELSpecial silica phase for determination of pesticides in food samples Features Base material silica, pore size 60 Å, particle size 45 μm, specific surface 500 m2/g, pH stability 2–8 Primary and Secondary Amine functions (PSA), 5 % C Removes polar compounds (e.g.,…
-
CHROMABOND® HR-XC
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
CHROMABOND® PA
MACHEREY-NAGELCHROMABOND® SPE products Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special…
-
CHROMABOND® Flash RS C18 ec Cartridges
MACHEREY-NAGELIdeal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…
-
CHROMABOND® Flash RS SPHERE SiOH Cartridges
MACHEREY-NAGELIdeal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…
-
CHROMABOND® SB
MACHEREY-NAGELQuaternary ammonium modified silica anion exchanger for SPE (SAX) Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 silica modified with quaternary amine strongly basic anion exchanger (capacity ~ 0.3…
-
CHROMABOND® HR-X
MACHEREY-NAGELSpherical, hydrophobic polystyrene-divinylbenzene resin for SPE Features Hydrophobic polystyrene-divinylbenzene copolymer pH stability 1–14 High-purity material with highest reproducibility and lowest blank values due to an optimized manufacturing process Spherical particles…
-
CHROMABOND® Flash Columns and Connecting Kits
MACHEREY-NAGELConnecting kits for CHROMABOND® Flash columns CHROMABOND® Flash Starter Kit consists of: 1/8" PTFE tubing, ID 1.5 mm, length 3 m; 5 x 1/4"-28 PP nuts; 5 x 1/8" ETFE ferrules; 5 x 1/4"-28 nylon unions; 2 x 1/4"-28 PP luer locks female; 1 x 1/4"-28 PP luer…
-
CHROMABOND® HR-XCW
MACHEREY-NAGELWeak carboxylic acid modified polymeric cation exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 50–60 Å, particle sizes 45 µm or 85 µm (standard), very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH stability…
-
CHROMABOND® Flash RS SiOH Cartridges
MACHEREY-NAGELIdeal for Flash separations from 10 mg up to 300 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…
-
CHROMABOND® C18
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
CHROMABOND® PCA
MACHEREY-NAGELPropylcarboxylic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 propylcarboxylic acid modified silica, weakly acidic cation exchanger (WCX) Recommended…
-
CHROMABOND® HILIC
MACHEREY-NAGELAmmonium – sulfonic acid modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g zwitterionic polar phase with ammonium – sulfonic acid modification, carbon content 7 %, pH stability 2-8 Polar…
-
CHROMABOND® Na2SO4/Florisil® SPE Columns
MACHEREY-NAGELCombination phase for SPE of hydrocarbons from water acc. to DIN H53 / ISO DIS 9377-4 Features Special combination phase of sodium sulfate and Florisil® Recommended application: hydrocarbons from drinking, surface and waste waters
-
CHROMABOND® QuEChERS
MACHEREY-NAGELSpecial products for determination of pesticides in food samples QuEChERS method and pre-mixes Within a few years after its development by Anastassiades et al. the QuEChERS method has gained a leading position for the determination of pesticide residues in food samples by GC-MS or LC-MS,…
-
CHROMABOND® Alox N
MACHEREY-NAGELAluminium oxide, neutral, for SPE Features Aluminium oxide, high purity, pore volume 0.90 mL/g, particle size 60–150 µm, specific surface 150 m2/g neutral, pH 7 ± 0.5
-
CHROMABOND® PSA
MACHEREY-NAGELPropylsulfonic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 propylsulfonic acid modified silica very strong cation exchanger (capacity ~ 0.7 meq/g) …
-
SPE columns, CHROMABOND WAX
MACHEREY-NAGELPS/DVB copolymer with secondary and tertiary ammonium modification for mixed-mode SPE with weak anion exchange and reversed-phase properties (WAX). Exchange capacity ≥ 0.8 meq/g, pKa 6 + 9. High-purity material with ideal flow properties and highest reproducibility. Allows highest…
-
CHROMABOND® Flash BT Cartridges
MACHEREY-NAGELIdeal for Flash separations from 10 mg up to 33 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…
-
CHROMABOND® C8
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
-
CHROMABOND® SiOH-H2SO4/SA
MACHEREY-NAGELCombination phase for SPE analysis of PCBs Features SiOH-H2SO4: H2SO4-impregnated silica phase for oxidation of accompanying compounds to ionic and/or polar compounds SA: strongly acidic cation exchanger based on silica with benzenesulfonic acid modification for removal of ionic…
-
CHROMAFIL® filtration cartridges
MACHEREY-NAGELFeatures Filtration cartridges for sample clarification under vacuum (e.g., using the CHROMABOND® vacuum manifold or SPE automation systems like Gilson Aspec™, Rapidtrace) or by gravity Cartridge sizes 3 mL and 6 mL Different membranes: PET (polyester); RC (regenerated…
-
CHROMABOND® CN
MACHEREY-NAGELCyanopropyl modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 cyanopropyl phase, carbon content 5.5 %, polar to mid-polar In addition to weak hydrophobic interactions…