Column adapter for small sample injection including feed tubes.

Adjustable bed chromatographic column used for recycling, ascending or descending applications allowing for quick and easy adjustment of the PTFE plunger. The Por. C (25-50m) glass disc gives rapid flow with a minimum of mixing. Pressure tight to 3.515 Kg/cm2 (50 psi) at room temperature or…

Precision made PTFE coupling with 316 stainless steel liner for connecting Michel-Miller, or 5820 columns when packing. Designed to make a leak-tight seal without the use of O-Rings. Simply tighten until white ring appears indicating a seal has been made, secure locknut; no need to tighten further.…

Used on top of column packing to prevent turbulence caused by drop-wise addition. Six per pkg.

A simple, all PTFE septum injector. Allows direct, on-column injection to the center of the filter disc at top of column without stopping the solvent flow through the 1/4"-28 female side thread (with or without helicoil). Locknut design provides leaktight seal without o-rings. You can order the…

For use with Michel-Miller Liquid Chromatography System as filter to assure only clean solvent enters column. Threads are #7 Ace-Thred for use with 5801-07 End Fitting. Usually positioned, in line, between pump and column using 1/4"-28 tubing connectors such as 5854, 5855 or 12724. Glass only is…

For use as column end fitting that allows connection of appropriate size Ace-Thred to tubing connectors with NPT threads. Available in various Ace-Thred and NPT sizes. Most come complete with both a 100 micron and a 350 micron polyethylene filter.

With 24/40 standard taper joint at top and a 2 mm bore stopcock at the bottom.

Jacketed, adjustable bed chromatographic column used for recycling, ascending descending applications. Completely jacketed for better temperature uniformity with single bushing at each end allowing for quick and easy adjustment of the PTFE plunger. the 25-50 micron porous glass disc gives rapid…

Large chromatography columns with o-ring grooved flat flanged tops and Ace-Thred bottoms. Column extenders and 5860 heads should be mated to columns with our 6517 series clamps. All columns and extenders are supplied with either a 7855-254 (4") or 7855-260 (6") silicone o-ring. For capfe o-rings,…

A combination of the high performance, low pressure Michel-Miller Chromatography Line and Adjusta-Chrom Recycling Column. Top has adjustable fitting that allows for a bed height anywhere within 1 - 6" below thread. Plunger tip is all PTFE with a porosity C (25-50m) glass disc. Complete column…

For use with 5862 Chromatography Column.With #50 Ace-Thred center neck and/or two #15 Ace-Thred side necks and 4" or 6" flange at bottom, ground flat Use with 6517 Clamp.