United Scientific Supplies Lab Clamps, Stands & Supports
-
Porcelain Support Stands with Rods
United Scientific SuppliesHeavy porcelain bases with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is…
-
Two-Way (High/Low) Burner Stand
United Scientific SuppliesThis stand is ideal for use with alcohol burners. The base is made from 3/16" stainless steel rod with a plated steel mesh top. The stand can be used in either high (5") or low (4") position.
-
Test Tube Clamp
United Scientific SuppliesSelf closing brass test tube clamp with finger grips and without finger grips
-
Lattice Lab System Components
United Scientific SuppliesComponents from Lattice Lab Sets are available individually so sets can be expanded to accommodate customized needs.
-
Heavy Support Stands with Rods
United Scientific SuppliesThese stamped steel bases feature an added steel plate on the back which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base.
-
4-Prong Extension Clamp
United Scientific SuppliesFeatures a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".
-
Laboratory Jack
United Scientific SuppliesStrong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.
-
-
Extension Clamps
United Scientific Supplies3 pronged extension clamp is 10" long and has rubber tubing covering the prongs Extention Clamp with cork covered jaws, 8" total length 3 Pronged clamp with aluminum rod, 10" long
-
United Scientific™ Flask Stand Silicone
United Scientific SuppliesThis silicone flask stand can support round bottom flasks as large as 2000 mL, as well as other items like beakers and dishes. The stand has 12 molded-in steps to provide a secure grip for a wide range of flasks. The silicone material that is heat resistant to 250° C. Flask stand…
-
Cast Iron Support Stands with Rods
United Scientific SuppliesThese support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.
-
FUNNEL HOLDER, DOUBLE, PP, PK/6
United Scientific SuppliesSuspend two funnels simultaneously using this polypropylene holder. These corrosion-resistant holders can be used with 3" to 6" diameter funnels, and include an extra plate to accommodate 1" to 3" diameter funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
-
Extension Rings
United Scientific SuppliesZinc plated steel extension rings. Rod diameter is 5/1", overall length is 12".
-
United Scientific™ Support Ring With Opening
United Scientific SuppliesSteel rod, zinc-plated extension support rings. Rod diameter 7 mm (0.27”) and the straight rod portion of each is 7.25” (184 mm) long. Open support rings are ideal for use with funnels, boiling flasks, and separatory funnels.
-
Single Burette Clamp
United Scientific SuppliesExcellent for holding small objects, The jaws on these burette clamps open from 15mm to 45mm (0.5" to 1.75"). The clamp attaches to rods up to 13mm (0.5"). O.D. Jaws can be rotated and locked at any angle. Available with the jaws coated or uncoated.
-
Lattice Lab System, Set #2
United Scientific SuppliesThis Lattice Lab System features an assortment of aluminum rods from 18" to 48" long. Assembly is easy and requres only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy. Please note: must be shipped by motor…
-
Support Stands with Rod and Rings Sets
United Scientific SuppliesEach set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.
-
Hook Collar Clamps
United Scientific SuppliesHook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".
-
A-Base and Rod
United Scientific SuppliesThe A-shaped base is made of rugged cast iron for extra stability. It has 22cm long legs and features a baked on black chemical resistant finish. The rod is zinc plated steel, 61cm long and 12mm in diameter.
-
2 Prong Cork, PVC, and Silicone Lined Buret Clamp
United Scientific SuppliesOur deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…
-
Lattice Lab System, Set #3
United Scientific SuppliesThis Lattice Lab System features an assortment of aluminum rods from 18" to 48" long including 10 rods that are 48" long. Assembly is easy and requres only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of cast…
-
Screw Compressor Tubing Clamps
United Scientific SuppliesScrew Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.