Clamps/Supports

Compare Tool

Select up to 3 products

HomeAll Products

Clamps/Supports

1 - 32 of 306
Sort
View
Show
  • Buret Clamps

    United Scientific Supplies

    Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

  • Frame Connectors, Hooks & Support Apparatus

    Ohaus

    S-Connector Clamp is ideal for constructing lab-frames or other supports requiring the connection of two perpendicular rods. Clamp connects two 13 mm (0.51") rods at a 90° angle and features separate adjustment screws for each rod location. Lab Frame Foot Stainless steel…

  • Aluminum Lab-Lifts

    Ohaus

    Anodized aluminum construction Three sizes Convenient Aluminum lab-lifts provide stable height adjustment for lab items such as flasks, baths and small equipment weighing up to 45 lbs. Aluminum lab-lifts come in three sizes: 4” x 4”, 6” x 6” and 8” x…

  • Screw Compressor Clamp, Closed Jaw (Hoffman)

    Humboldt

    Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

  • Test Tube Clamps

    United Scientific Supplies

    Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

  • Cast Iron Support Stands with Rods

    United Scientific Supplies

    These support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.

  • Plastic Joint Clips

    Bal Supply

    Standard taper keck type joint clips Color coded for easy size identification Will not corrode or scratch glassware Can withstand temperatures up to 302°F (150°C)

  • Inoculating Turntable

    Ohaus

    OHAUS hand-operated inoculating turntables produce almost concentric circles of bacterial colonies that are evenly distributed across petri dishes. Cast iron turntables are coated with gray baked acrylic enamel. The 76 mm (3") high, small turntable accommodates 100 mm petri dishes. It has…

  • Talboys Staining Rack

    Ohaus

    Slide Staining Rack Constructed of stainless steel, the Talboys Slide Staining Rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 533mm (21") inside.

  • Hose/Tubing Clamps

    Thomas®

    For use with all types of rubber and plastic tubing Made of chemical/corrosion-resistant, non-conducting nylon One-piece, reusable clamp squeezes shut for a leak proof seal pressing the side releases the clamp May be chemically or gas-sterilized for biomedical or food applications …

  • Stainless Steel Ball & Socket Clamps

    Bal Supply

    Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

  • Scienceware® Pinchcock Tubing Clamp

    Bel-Art Products

    One piece pinchcocks molded of autoclavable white polycarbonate Release by thumb pressure 2848W26 Mini Clamp is single position on-off clamp; for use with thin-wall tubing less than 3/16” o.d. 2848W30 Clamp is 15-position ratchet- type for one-hand, stepwise flow control…

  • Fixed-Position Clamps

    Ohaus

    Used to hold apparatus near the lab-frame where no adjustment is required after set-up. Built-in holder grips rods up to 19mm (0.75") in diameter Fixed-Position Clamps have an integral holder but can be rotated after attachment to a lab-frame or other apparatus. Available in 2-prong or…

  • Scienceware® Tubing Clamps

    Bel-Art Products

    Screw Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…

  • 3-Prong Heavy-Duty Clamps

    Ohaus

    Multi-purpose UltraJaws Heavy-Duty Clamps feature an innovative closed yoke construction that minimizes contamination and corrosion of internal components. The unique design enables secure gripping and positioning with added strength and durability. Available in both single and dual prong…

  • Thomas Spherical Joint Pinch Clamps

    Thomas®

    For ball-and-socket or O-ring glass joints in universal use for quick, convenient and safe mounting and dismantling of apparatus Strong, linear spring closing action Unique forked-shaped jaws provide uniform compression for safe, leak-free seals Screw-locking device with spring for…

  • Support Stands with Rods

    United Scientific Supplies

    These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

  • LabJaws Connectors & Holders

    Ohaus

    Regular Clamp Holders Stainless steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in…

  • Heavy-Duty Stainless Steel Lab-Lifts

    Ohaus

    Exceptional stability and control Stainless steel construction Seven sizes for any application Autoclavable and chemical-resistant Heavy-duty stainless steel lab-lifts are very stable lifting platforms that offer exceptionally high strength and durability. Constructed of…

  • 2-Prong Multi-Purpose Clamps

    Ohaus

    Stainless steel electro-polished finish or nickel-plated zinc Large grip adjustment range 2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest…

  • 3-Prong Dual Adjustable Clamps

    Ohaus

    Wide adjustment range Autoclavable Stainless steel Polished finish Dual Adjustable Clamps are durable, multi-purpose clamps constructed of stainless steel and offer excellent chemical resistance and overall strength. The versatile 3-prong design secures a variety of lab apparatus…

  • Talboys Buret Holders

    Ohaus

    Stainless steel electro-polished finish or nickel-plated zinc construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height…

  • Ultra Flex Support System With Lab Frame Connector

    Ohaus

    Mounts to lab-frames or support stands Suitable for use in fume hoods 3 types of clamp heads Support system securely attaches to support stands, lab-frames, or any support rod up to 0.75” (1.9 cm) in diameter.  Ultra Flex clamping system is extremely versatile. Flexible arm…

  • Scienceware® Lattice Support Stand

    Bel-Art Products

    Expand your options in the laboratory Even distribution rods for maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as…

  • Multi-Purpose Flexible Arm Stand

    Bel-Art Products

    Flexible arm with molded acetal copolymer links has ball-and-socket joints. One end is designed to accept the 0211G32 Electrode Holder (sold separately) while the other has a 1.3cm (1/2") diameter stainless steel pin for attachment to the weighted base or a suitable clamp. …

  • 3-Prong Multi-Purpose Clamps

    Ohaus

    Large grip adjustment range 3-prong construction Single or dual adjust Nickel-plated zinc Designed to securely hold every type of laboratory glassware and apparatus. Long, seamless nickle-plated brass tubing attaches clamp head securely and offers easy positioning in the deepest…

  • Screw Compressor Clamp, Standard Open-Jaw C-Clamp

    Humboldt

    Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

  • 2 Hole Support Stands with Rods

    United Scientific Supplies

    These stamped steel bases feature 2 tapped holes for the rods. Hole at the center of the shorter side is for standard ring stand use. Hole at the center of the longer side is for titrations, specific gravity determinations, etc. Each base includes a zinc plated steel rod.

  • Porcelain Support Stands with Rods

    Heavy porcelain bases with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is…

  • Screw Compressor Clamps: Open Jaw (Hoffman)

    Humboldt

    Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

  • Pinch Clamps

    Thermo Scientific Nalgene

    All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

  • Steel Support Rings

    United Scientific Supplies

    Support rings with clamp, steel rod.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.