Available with fixed feet or casters Telescoping Base Stands with Fixed Feet: provide support for a variety of Labconco fume hoods and enclosures. Stands have removable pins to adjust the legs to eight different heights in 1" increments from 27.5" to 34.5". Four fixed…

Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…

SoLo Hydraulic Lift Base Stands are designed to support Purifier Logic Biosafety Cabinets. They are constructed of durable epoxy-coated steel and support a maximum of 700 pounds of equipment, excluding the weight of the safety cabinet. A built-in hydraulic lift is operated by a remote control with…

Modular Workstation D1 includes: (2) 72" Lab Bench Full Height (84) with Casters (C), Ships Knockdown (K) (2) 72" Lab Bench Full Height Worktop - Epoxy Resin, Beveled Edge, Black (2) Lab Bench Lower Shelf, Epoxy Resin, 30 sq ft, Beveled Edge, Black (2) 72" Lab Bench upper Shelf…

Manual Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with hand crank so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons of…

Protector Vacuum Pump Storage Cabinets provide an enclosed space for storing vacuum pumps. Durable, glacier white powder-coated steel construction complements laboratory casework and Labconco fume hoods. Features: a single, manual-closing, non-locking door with left or right hinge; one 115V, 60 Hz…

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with sliding framed glass doors, inset pulls, and inset construction.

Suspended Cabinet is designed to be hung from an INSTOCK table. Each suspended cabinet is furnished with complete hanging hardware.

Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…

Acid Storage Standing Height Cabinet are used to store acids and are lined with a chemically resistant polyethylene liner. Full height doors are lined with 1/8" thick polyethylene. Chemical resistant 3/16" thick molder polyethylene lining with coved corners and 2" lip at front…

ADA Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

The CPU holder attaches via a bracket mount and swivels side to side. The heavy duty holder is adjusted 12" to 20" high and 3.5" to 9" depth.

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC40 standing height base cabinet…

Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…

Mobile Cabinet Work Surface is 3/4" thick black phenolic resin that provides a 1" overhang on the front and a 1/2" overhang at the rear and sides. It adds 3/4" to the over all height of the cabinet. There is a grip notch included under the front edge of the work surface to…

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

Foot Operated faucet is deck mounted with a vacuum breaker. Faucet is chrome plated with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats. Faucet has a floor mounted foot operated valve. DI/RO faucet is deck mounted for distilled, deionized or…

Adjustable height accommodates persons sitting or standing Support Protector, Protector XL Benchtop, HOPEC IV. Basic fume hoods, Paramount Ductless Enclosures, Purifier Class I and HEPA Filtered Enclosures, Purifier Clean Benches, PCR Enclosures, Protector XVS Ventilation Station and XPert…

Cold Water Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.

Mixing Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.

16ga/304 stainless steel, removable front access panel, 4" backsplash, square edge on front and sides, temperature control mixing valve, Z-clips for wall mounting, includes stainless steel flat strainer drain, tail piece and p-trap, includes flexible stainless steel supply hoses.

Suspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.

Apron Rails are used to span a knee space area between two cabinets. Attachment hardware is included. Can be cut to fit in the field.

Modular Workstation G1 includes: (2) 72" Lab Bench Full Height (84) with Casters (C), Ships Knockdown (K) (2) 72" Lab Bench Full Height Worktop - Epoxy Resin, Beveled Edge, Black (2) 72" Lab Bench Upper Shelf 15"D (2) 72" Lab Bench Lower Shelf 15"D (2) 72"…

Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…

Solvent Storage Standing Height Cabinet has self-closing doors and are used to store flammables and solvents. Construction meets UFC, OSHA and MFPA No. 30-1993. Includes vent bungs with flame arrestors. The doors are self-closing and synchronized so that both doors will always fully close. The…

Application: Deck mounted mixing faucet with vacuum breaker and wrist blade handles for hot and cold water. Body: Forged brass. Valve Units: WaterSaver self-contained compression valve units with replaceable stainless steel seats. Handles: Forged brass wrist blade handles with…

Black chemical-resistant work surface Dished or flat Dished surfaces feature are contoured to fit the dimensions of the enclosure and to contain spills. They are compatible with Xpert Balance Systems & Filtered Balance Stations, Purifier Class I, HEPA Filtered & Filtered PCR…

Knee Space Panels for Drawer Aprons are to be used with Drawer Aprons. Knee Space Panels for Drawer Aprons are to be used with Apron Rails. The knee space closes off the casework to the wall to create a clear sitting under the work surface.