Burners

Compare Tool

Select up to 3 products

1 - 32 of 55
Sort
View
Show
  • StarFire Bunsen Burner ST

    Argos Technologies

    The Argos StarFire ST offers a safe alternative to standard laboratory Bunsen burners. The stainless steel body and compact size make it ideal for use in laminar flow hoods. Unit can be operated with standard house gas or with an integrated gas cartridge (sold separately); includes an added…

  • FireStar™ Bunsen Burners

    Argos Technologies

    The Argos FireStar™ units are compact, safe and versatile Bunsen burners that operate with either house gas or disposable gas cartridges. The FireStar features UV resistant stainless steel housing and a removable burner head for easy cleaning. The dual knobs for adjusting gas and air flow…

  • Electric Bunsen Burner

    Electrothermal (Cole-Parmer)

    Combines the efficiency of a gas burner with the safety and control of an electric heater Radiant heat is only directed upwards Can be placed on benchtop or hand held Constructed of corrosion resistant metal Used for heating test tubes, crucibles, small flasks and beakers.…

  • Bunsen Burner, Tirril

    United Scientific Supplies

    Natural Gas with Flame Stabilizer Tirril Bunsen Burner

  • Wheaton Alcohol Burner

    DWK Life Sciences (Wheaton)

    Ground glass cap Wheaton 400 borosilicate glass Supplied with glass stopper This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat flame is well suited for microscopy purposes. The unit is supplied with a…

  • The Tirril Burner for Small-Scale Burning Test (ASTM D5025) supports the following standards: ASTM D5025 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Supplied complete with…

  • Flame 100

    WLD-TEC

    The safe alternative for traditional Bunsen burner or alcohol! Flame without a match Innovative Security Technology Easy-to-use Low cost and environmentally friendly Minimum space requirement Multi-Talented The Flame 100 is ideally suited for all flame…

  • When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

  • Fuego SCS basic

    WLD-TEC

    The Fuego-Series sets new standards in the Laboratory gas burner technology. With an innovative design, this security laboratory burner is suitable for all flame applications in the laboratory Modern design Striking: the unmistakable shape. The low profile body facilitates…

  • These noiseless burners provide a clear flame of any desired height from 1/2" (12.7mm) to 12" (305mm), with separate control of both flame temperature and flame length. The burners incorporate threaded aluminum air control sleeves and precision machined, fine-pitch brass needle valves…

  • Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Scienceware® Piezoelectric Gas Lighter

    Bel-Art - SP Scienceware

    Requires no batteries or fuel Push-button trigger Weighs only 3.1 ounces The small, self-contained piezoelectric generator produces sparks at 20 Kv. Lighter can be used to light bunsen burners, gas stoves, propane torches or oxy-acetylene torches. Plastic pistol-grip provides…

  • Small, portable, lightweight unit with built-in piezoelectric crystal for ignition Operates on butane gas Maximum flame temperature 1,300°C (2,400°F) Flame lasts up to two hours on a full charge of butane; reservoir capacity 26 grams Flame adjusted by means of needle valve…

  • The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

  • Employs flint to produce a spark when snapped across rasp Rasp can be turned for fresh surface Zinc-plated hood traps gas for ready ignition Overall length 203 mm (8.1”). 

  • Fuego SCS

    WLD-TEC

    The laboratory gas burners for greater security with non-contact IR sensor and functions. The Fuego SCS represents a new class among laboratory gas burners. With its innovative design and the extensive standard equipment, this laboratory gas burner is suitable for all flame related…

  • Organic Drain Assembly for AAnalyst 700/800

  • Flame Shield

    Humboldt

    Used to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.

  • Burner Alcohol Dual-Wick

    GSC International, Inc.

    This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

  • Burner Dual-Wick Alcohol

    GSC International, Inc.

    This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

  • Stainless steel design Long-lasting double tube system Sterilization period 5-7 seconds Self-locking angular adjustment The electrical sterilization system SteriMax is most suitable for the sterilization of inoculation loops, needles and instruments. It is ideal for laboratories…

  • Ideal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …

  • The Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…

  • Burner Gasket Kit

    PerkinElmer

    This product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.

  • Accessory for WLD-TEC Quadrupod (1228Z46). Ceran (glass-ceramic) construction resists damage due to sudden temperature changes 155 x 155 mm (L x W)

  • Burner Tops

    Humboldt

    Various tops for use with Humboldt burners.

  • Gas Lighter

    United Scientific Supplies

    Hooded lighter is safe and economical. The hood traps gas and protects the lighting file. Replacement flints are also available.

  • Gasprofi 1 SCS micro - Series: Safety and comfort in the smallest possible space. Optimal for all flame-related applications in the laboratory. Simply safe to operate Depending on the model, the Gasprofi 1 SCS micro - Series can be operated with touch free IR-Sensor, button function or…

  • The mobile handheld laboratory gas burner powerjet 2 - The solution for all flame sterilization work in the microbiology or biotechnical fields. The burner is lit as soon as the bar is pressed. The flame can be regulated in size and is extinguished by release of the bar. Additionally…

  • Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.