Burners

Compare Tool

Select up to 3 products

1 - 32 of 57
Sort
View
Show
  • Bunsen Burner, Tirril

    United Scientific Supplies

    Natural Gas with Flame Stabilizer Tirril Bunsen Burner

  • Wheaton Alcohol Burner

    DWK Life Sciences (Wheaton)

    Ground glass cap Wheaton 400 borosilicate glass Supplied with glass stopper This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat flame is well suited for microscopy purposes. The unit is supplied with a…

  • Sterimax Electrical Sterilizer

    WLD-TEC

    Stainless steel design Long-lasting double tube system Sterilization period 5-7 seconds Self-locking angular adjustment The electrical sterilization system SteriMax is most suitable for the sterilization of inoculation loops, needles and instruments. It is ideal for laboratories…

  • Electric Bunsen Burner

    Electrothermal (Bibby Scientific US)

    Combines the efficiency of a gas burner with the safety and control of an electric heater Radiant heat is only directed upwards Can be placed on benchtop or hand held Constructed of corrosion resistant metal Used for heating test tubes, crucibles, small flasks and beakers.…

  • Nitrous Oxide Burner Head for PerkinElmer 1100(B), 2100 and 4100 AA…

    PerkinElmer

    Required for the determination of refractory metals when using nitrous oxide-acetylene flames. Can also be used for air-acetylene. Can be rotated with most instruments to reduce sensitivity.

  • Flame 100

    WLD-TEC

    The safe alternative for traditional Bunsen burner or alcohol! Flame without a match Innovative Security Technology Easy-to-use Low cost and environmentally friendly Minimum space requirement Multi-Talented The Flame 100 is ideally suited for all flame…

  • Ceran Cover Plate

    WLD-TEC

    Accessory for WLD-TEC Quadrupod (1228Z46). Ceran (glass-ceramic) construction resists damage due to sudden temperature changes 155 x 155 mm (L x W)

  • Burner Gas Connector

    Humboldt

    Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

  • Scienceware® Piezoelectric Gas Lighter

    Bel-Art Products

    Requires no batteries or fuel Push-button trigger Weighs only 3.1 ounces The small, self-contained piezoelectric generator produces sparks at 20 Kv. Lighter can be used to light bunsen burners, gas stoves, propane torches or oxy-acetylene torches. Plastic pistol-grip provides…

  • Powerjet 2 Mobile Burner

    WLD-TEC

    The mobile handheld laboratory gas burner powerjet 2 - The solution for all flame sterilization work in the microbiology or biotechnical fields. The burner is lit as soon as the bar is pressed. The flame can be regulated in size and is extinguished by release of the bar. Additionally…

  • Adjustable Micro-Bunsen Burner with Adjustable Gas Valve

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Fuego SCS pro

    WLD-TEC

    Safety enhanced laboratory gas burner, battery operated with touch free IR-sensor and button function. Innovative technology that thinks with you! Fuego SCS pro with new functions & graphic display The Fuego SCS pro represents a new status among laboratory gas burners. The…

  • Gas Lighter

    United Scientific Supplies

    Hooded lighter is safe and economical. The hood traps gas and protects the lighting file. Replacement flints are also available.

  • Ultratorch 3 Multi-Purpose Burner

    Master Appliance

    Butane-powered Soldering Iron, Flameless Heat Tool and Torch Triple function soldering iron, flameless heat tool and brazing torch Features oxygen-free, copper based Ultratip. Soldering tips, with thick iron and chrome plating for long life and high thermal conductivity Cordless and…

  • High Temperature Blast Burner

    Humboldt

    Designed to burn all gases in large volume with a short, wide and uniformly high-temperature flame. A special micrometer needle valve is used to regulate the gas and a safety cap prevents dangerous backflashes. The burner features a plated, injector-shaped venturi tube and a direct feed inlet for…

  • Ring Burner

    Humboldt

    The Humboldt Ring Burner features an improved design that puts the guide pins on the inside circumference so that the burner remains equidistantly around the still. A Fletcher attachment regulates the gas and air. The overall shank length is 11" (279mm), ID is 4-3/4".

  • Universal Blast Burner

    Humboldt

    This bleeder valve unit provides small needle-sized to large brush flame patterns for fusing ore, working Pyrex and soft glasses, and performing other high-temperature melting applications. Extremely accurate flame direction, from three interchangeable burner tips, a telescoping mixing tube sleeve,…

  • High-Temperature Burners

    Humboldt

    When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

  • Pipe Mounting-Type Burner

    Humboldt

    Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …

  • Pilot Flame Burner

    Humboldt

    Ideal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …

  • Adjustable Burners with Threaded Needle Valves

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Torch Support

    Humboldt

    The Torch Support turns hand torches into an adjustable position blast burner. This instantly detachable support is constructed of plated brass with heavy cast iron tripod base and pedestal connected by a universal ball joint to a clamp that fits on the torch handle. The unit is equipped with…

  • Alcohol Lamp

    Boekel

    135 ml capacity Conical, low profile design is more stable and much safer than glass alcohol lamps Supplied with snuffer cap and one extra wick Height: 8.9 cm (31⁄2") Diameter: 10.2 cm (4") Two Way Lamp Stand Used to vary distance between heated vessel and alcohol lamp …

  • Adjustable Burner with Adjustable Gas Valve & Flame Stabilizer

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Burner Gasket Kit

    PerkinElmer

    This product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.

  • Tirril Burners without Pilot Flame

    Humboldt

    The Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…

  • Utility Blast Burner

    Humboldt

    This burner features a removable nozzle with perforated tip and orifice designed to aim a large, hot, pointed flame in a modified M.I.T. pattern with great accuracy. A universal ball joint positions the flame easily for working large pieces of hard glass. Separate needle valves with leak-proof…

  • Tirril Burners with Pilot Flame

    Humboldt

    The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

  • Beaker Handle Kit

    Humboldt

    Adjustable Band Clamp Kit for making a great carrying handle on beakers of all sizes.

  • Standard Micro-Bunsen Burner with Air Regulator Only

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections.  *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners.…

  • Burner Tops

    Humboldt

    Various tops for use with Humboldt burners.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.