Buffers, 1 L
-
-
TAE buffer (10X), 1 L
MP BiomedicalsPremixed liquid, 10X concentrate. Contains 0.4M TRIS base, 0.4M Acetate, 10mM EDTA, pH 8.0. Used in agarose electrophoresis for separation of nucleic acids, DNA and RNA. Has lower buffer capacity than TBE but double-stranded DNA runs faster in TAE buffer.
-
Buffer, pH 6.00, Standardized
Reagents®Boiling Point: approx. 100°C Density: 1 Melting Point: approx. 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 Solubility Information: Miscible Storage: Ambient DOT: NOT REGULATED.
-
Zinc Buffer, Volumetric
Reagents®Composition: Water 95.58%, Ammonium Hydroxide 4.27%, Oxalic Acid Dihydrate 0.15% Density: 1 Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Synonyms: Ammonium Hydroxide/Oxalic Acid Shelf Life: 18 Months Storage: Ambient DOT: UN3266, CORROSIVE LIQUID,…
-
Synonyms: Tris(hydroxymethyl)aminomethane hydrochloride buffer solution Density: 1.05 g/mL at 20 °C Other Notes: Buffer component (SET buffer) in the preparation of RNA 1 Legal Information: Trizma is a registered trademark of Sigma-Aldrich Co. LLC
-
Composition: Water 98.53%, Ammonium Chloride 1.30%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.17%, Ammonium Hydroxide 0% Boiling Point: 100°C Density: 1.005 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 8.5 Solubility…
-
Buffer solution pH 10.00
MilliporeSigma109409 Buffer solution pH 10.00 (boric acid/potassium chloride/sodium hydroxide), traceable to SRM from NIST and PTB pH 10.00 (25°C) Certipur®
-
CertiPUR® Buffer Solution
MilliporeSigma(acetic acid/sodium acetate) traceable to SRM from NIST and PTB pH 4.66 (20°C) Synonyms Buffer solution pH 4.66 HS Code 3822 00 00
-
Buffer, Reference Standard, pH 13.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Multiple sizes to fit your usage and budget constraints. All combined in one of the most comprehensive…
-
Fluka Acetate buffer solution pH 4.65 sodium acetate / acetic acid
Honeywell Research ChemicalsChemical name: Acetate buffer solution pH 4.65 Chemical synonyms: Sodium acetate buffer solution; Michaelis buffer Density (g/cm3): 1 Chemical purity: =99.7% UN Number:
-
TISAB IV, Volumetric
Reagents®Boiling Point: Approximately 100°C Density: 1.1 Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Storage: Ambient DOT: NOT REGULATED.
-
Clear pH Buffer Solutions
chemForce® (powered by Thomas Scientific)Harmonized #: 2806.10.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
The Fluka phosphate buffer solution is used for a wide range of analysis and calibration purposes in chemical laboratories. It delivers the results with utmost consistency, purity and accuracy.
-
Buffer Solution, pH 7.00 +/- 0.01 @ 25 DEG C, Reference Standard
Spectrum ChemicalGrade: Reference Standard
-
Buffer, Reference Standard, pH 1.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
FLUKA Buffer solution pH 12.0 (20 °C)
Honeywell Research Chemicalsdi-sodium hydrogen phosphate / sodium hydroxide solution Synonym(s): Sodium phosphate buffer solution; Buffer solution from phosphoric acid/di-Sodium hydrogen phosphate; Phosphoric acid/di-Sodium hydrogen phosphate solution Density: 1.00 g/mL at 20 °C
-
Buffer solution, pH 4.01±0.01 @ 25°, colorless, NIST traceable
BeanTown ChemicalMDL No: MFCD00146206 Liquid
-
Buffer, Reference Standard, pH 3.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
Buffer Solution, pH 1.68 +/- 0.02 @ 25 DEG C, Reference Standard
Spectrum ChemicalGrade: Reference Standard
-
Fluka Acetate buffer solution pH 4.6 sodium acetate / acetic acid, for…
Honeywell Research ChemicalsChemical name: Acetate buffer solution pH 4.6 Chemical synonyms: Sodium acetate buffer solution; Acetic acid-Sodium acetate buffer 1:1 pH 4.6 Chemical purity: =99.9% UN Number:
-
Buffer Standard, pH 13.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Buffer Standard, pH 6.86
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Fluka Buffer solution pH 7.413 (25oC) with fungicide, according to DIN 19266
Honeywell Research ChemicalsChemical name: Buffer solution pH 7.413 (25°C) Density (g/cm3): 1 UN Number:
-
FLUKA Buffer solution pH 9.0 (20 °C)
Honeywell Research Chemicalsblue colored, borax / hydrochloric acid Synonym(s): Sodium tetraborate buffer solution MDL Number: MFCD00081185
-
Buffer solution, pH 12.00±0.01 @ 25°, colorless, NIST traceable
BeanTown ChemicalMDL No: MFCD00147253 Liquid
-
Buffer, pH 10.00 - Color Coded Blue
Ultra ScientificStandardized against NIST certified pH 6.86 and 10.01 reference samples
-
Buffer solution, pH 10.00±0.01 @ 25°, blue, NIST traceable
BeanTown ChemicalMDL No: MFCD00146206 Liquid
-
Buffer Standard, pH 5.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
FLUKA Buffer solution pH 4.0 (20 °C)
Honeywell Research Chemicalswith fungicide, citric acid / sodium hydroxide / sodium chloride solution, traceable to SRM from NIST
-
The Exaxol phosphate buffer (6.8 pH) is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Laboratory use only
-
Buffer solution pH 9.00
MilliporeSigma(boric acid/potassium chloride/sodium hydroxide), traceable to SRM from NIST and PTB pH 9.00 (25°C) Certipur®
-
Fluka Phosphate buffer solution pH 7.00 (20oC) (potassium dihydrogen phosphate /…
Honeywell Research ChemicalsDensity (g/cm3): 1.01