Buffers, 1 L
-
FLUKA Buffer solution pH 9.0 (20 °C)
Honeywell Research Chemicalsblue colored, borax / hydrochloric acid Synonym(s): Sodium tetraborate buffer solution MDL Number: MFCD00081185
-
Buffer Standard, pH 7.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
-
Synonyms: TBE buffer Application: Ready for use in gel electrophoresis after dilution to working concentrations. Preparation Note: Prepared with Biotechnology Performance Certified Trizma base (Product Code T6066) and Molecular Biology Reagents boric acid (Product Code B6768) and EDTA…
-
-
Buffer, Reference Standard, pH 1.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
Fluka Buffer solution pH 4.0 (20oC) red colored, citric acid / sodium hydroxide …
Honeywell Research ChemicalsDensity (g/cm3): 1
-
-
TISAB III, Standardized
Reagents®Composition: Water 67%, Ammonium Chloride 26%, Ammonium Acetate 5%, 1,2-Cyclohexylenedimaine Tetraacetic Acid 2%, Cresol Red 0% Density: 1.13 Color: Colorless liquid Physical State: Liquid pH Range: 4.8 to 5.2 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient …
-
Fluka Buffer solution pH 7.413 (25oC) with fungicide, according to DIN 19266
Honeywell Research ChemicalsChemical name: Buffer solution pH 7.413 (25°C) Density (g/cm3): 1 UN Number:
-
Buffer solution, pH 7.00±0.01 @ 25°, yellow, NIST traceable
BeanTown ChemicalMDL No: MFCD00146252 Liquid
-
TAE buffer (10X), 1 L
MP BiomedicalsPremixed liquid, 10X concentrate. Contains 0.4M TRIS base, 0.4M Acetate, 10mM EDTA, pH 8.0. Used in agarose electrophoresis for separation of nucleic acids, DNA and RNA. Has lower buffer capacity than TBE but double-stranded DNA runs faster in TAE buffer.
-
Buffer solution, pH 9.18±0.01 @ 25°, colorless, NIST traceable
BeanTown ChemicalMDL No: MFCD00147253 Liquid
-
UN No.: UN2672 Class: 8 Pkg. Group: PG III
-
-
Buffer Solution, pH 10.00 +/-0.02 @ 25 DEG C, Reference Standard
Spectrum ChemicalGrade: Reference Standard
-
SIGMA Tris-Glycine-SDS Buffer 10x Concentrate,
MilliporeSigmaSynonyms: TRIS glycine SDS buffer solution Storage Temperature: 2-8°C Application: Tris-glycine-SDS (TGS) running buffer is the most commonly used buffer for sodium dodecyl sulfate – polyacrylamide gel electrophoresis (SDS-PAGE) of proteins. TGS is usually used for both the anode…
-
Sodium Sulfate Buffer, Volumetric
Reagents®Composition: Water 89.71%, Sodium Sulfate Anhydrous 9.36%, Sodium Carbonate 0.94% Boiling Point: Approximately 100°C Density: 1.07 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient …
-
Buffer Standard, pH 1.68
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Buffer, Reference Standard, pH 7.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
Fluka Buffer solution pH 8.0 (20oC) borax / hydrochloric acid, traceable to SRM…
Honeywell Research ChemicalsChemical name: Buffer solution pH 8.0 (20 °C) Chemical synonyms: Sodium tetraborate buffer solution UN Number:
-
TISAB IV, Volumetric
Reagents®Boiling Point: Approximately 100°C Density: 1.1 Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Storage: Ambient DOT: NOT REGULATED.
-
TISAB II, Standardized
Reagents®Composition: Water 84.82%, Acetic Acid 5.98%, Sodium Chloride 5.80%, Sodium Hydroxide 3%, 1,2-Cyclohexylenedimaine Tetraacetic Acid (CDTA) 0.40% Boiling Point: Approximately 100°C Density: 1.03 Melting Point: Approximately 0°C Color: Colorless liquid Physical State:…
-
Buffer, Reference Standard, pH 7.40 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
-
Buffer, pH 7.40, Standardized
Reagents®Boiling Point: Approximately 100°C Color: Colorless liquid Concentration: Water 99.17%, Potassium Dihydrogen Phosphate 0.68%, Sodium Hydroxide 0.16% DOT: NOT REGULATED. Density: 1 Melting Point: Approximately 0°C Physical State: Liquid Solubility Information: Miscible Storage:…
-
Grade: Reference Standard
-
Composition: Water 98.53%, Ammonium Chloride 1.30%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.17%, Ammonium Hydroxide 0% Boiling Point: 100°C Density: 1.005 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 8.5 Solubility…
-
Buffer Standard, pH 8.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Phosphate Buffered Saline is used to maintain a physiological pH and osmolarity, two key factors in tissue culture and molecular biology research. This concentrated form should be diluted to a working concentration using reagent grade water. Technical Advantage: Product manufactured under…
-
Sodium Cacodylate Buffer
Electron Microscopy SciencesPrepared from Sodium Cacodylate Trihydrate (F.W. 214.02)