pH

Compare Tool

Select up to 3 products

1 - 32 of 290
Sort
View
Show
  • Color-Coded pH Buffer Solutions

    chemForce™ (a Thomas Scientific Brand)

    Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

  • pH Electrode Solutions

    Thermo Scientific Orion

    Electrode Storage Solution 475 mL plastic bottle pH of solution is 6.2 to 7.4 For short term storage of all electrodes for one day to a week. Electrode Filling Solution Internal filling solution for Ross-type electrodes (3M KCl). In packages of five 60 mL bottles.

  • Color-Coded pH Buffers

    Ricca Chemical

    Standardized and certified traceable to NIST Standard Color-coded for quick reference Accuracy ±0.01 pH at 25°C pH temperature chart, lot numbers and expiration dates on each label pH 4.0 buffer is colored red, 7.0 buffer is yellow or green and 10.0 buffer is blue.…

  • Choose from economical solution bottles or individually sealed pH buffer pouches. NIST traceable materials Labeled with pH vs. temperature tables for accurate calibration All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to…

  • The MOST accurate pH Standards available anywhere now color-coded for convenience Traceable® pH Standards, Certified Reference Materials, are 100% compatible with all instruments and probes. Accuracy for the Traceable® Buffer at 25°C is ±0.010 pH—the most precise…

  • Buffer Tablets, pH 7.2

    MilliporeSigma

    Phosphate buffer solutions are used in hematology, for the dilution of staining solutions and for the rinsing steps in the staining process. The buffer tablets acc. to Weise will produce a buffered solution (pH6.4/pH6.8/pH7.2) that stabilizes the staining result and gives reproducible staining…

  • ROSS™ All-in-One™ pH Buffer Kit

    Thermo Scientific Orion

    Maintain pH electrodes more effectively with Thermo Scientific™ Orion™ ROSS™ All-in-One™ pH Buffer Kits. Convenient buffer kit includes 4.01, 7.00 and 10.01 buffers, ROSS storage solution, cleaning solution and storage bottle. Kit includes one each: 1 pint…

  • Accurate calibration Sealed buffer pouch provides disposable convenience More accurate first time measurements Easier to use than conventional liquid buffers; no secondary reservoir required. All buffers are certified NIST traceable; used pouch can be attached to permanent batch…

  • pH Buffer Standards

    SPEX CertiPrep

  • Composition: Water 99.52%, Sodium Carbonate 0.26%, Sodium Bicarbonate 0.21%, Thymol 0%, Methyl Alcohol 0%, Calcocid Blue AX Double 0% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Blue liquid Physical State: Liquid pH Range: 10 Solubility…

  • Technical buffering solutions for pH 4.01, pH 7.00 and pH 10.01: pH 4.01, pH 7.00 and pH 10.01 are available in the practical 50mL bottles as well as in 1L special bottles with dosing device and pour spout.  The buffer 10.0 is a special case: It is only still suitable for…

  • Composition: Water 98.99%, Potassium Acid Phthalate 1.01%, Thymol 0%, Methyl Alcohol 0%, Amaranth 0% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Pink liquid Physical State: Liquid pH Range: 4 Solubility Information: Miscible Shelf Life: 24…

  • pH Electrode Cleaning Kits

    Thermo Scientific Orion

    Extends the life of electrodes Prevents cross-contamination Removes bacterial or protein contaminants All kits contain four 1 oz. bottles of cleaning solution, a 15 mL beaker and a pipette. Sample Kit - includes one bottle each of cleaning solutions A, B, C, D Solution A - for removing…

  • Buffer pH 4.01 Powder Pillows Color coded red For 50a-mL samples

  • pH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…

  • For use in calibration of pH meters Every unit from 1.0 to 12.00 pH In 500 mL bottles

  • Optimum Results Filling Solutions

    Thermo Scientific Orion

    For use with ionplus® Sure-Flow® ISE electrodes Little or none of the ion of interest present helps prevent sample contamination Application-specific solution formulation improves response time Small temperature coefficients reduce electrode potential shifts from changing…

  • Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…

  • Various pH buffers for pH probe calibration. Buffer cases are available with a single buffer type or with an assortment of buffers (2 pints of pH 4, 7, and 10 buffers).

  • Our complete range of patented buffer solutions provide pH stability of up to five years. High buffering capacity provides rapid and stable calibration.

  • Buffer Solution, pH 5.00

    GFS Chemicals

    pH (@ 25°C) 5.00 +/- 0.02 NIST Traceable

  • pH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…

  • (potassium hydrogen phthalate), traceable to SRM from NIST and PTB pH 4.01 (25°C) Certipur®

  • Rainbow Buffer

    Mettler Toledo

    Traceable to NIST Standards Rainbow II Buffer package consists of 30 20 mL sachets of 10 each of 4.01, 7.00 and 10.01 pH solutions. Buffer solutions are traceable to NIST standards and come with a quality inspection certificate which guarantees the stated values and traceability. Rainbow…

  • Grade: Reference Standard

  • Any pH measurement is only as accurate as the buffer solution used for calibration. These buffer solutions are traceable to primary standards set by NIST. Buffers 5001A40 through 5001A45 come with a quality assurance certificate per DKD and are particularly useful in quality assurance systems.…

  • Phosphate Buffered Saline is used to maintain a physiological pH and osmolarity, two key factors in tissue culture and molecular biology research. This concentrated form should be diluted to a working concentration using reagent grade water. Technical Advantage: Product manufactured under…

  • Unit-dose powder pillows assure buffer freshness and eliminate the possibility of contamination. One powder pillow prepares 50 mL of pH 8.00 buffer solution. Phosphate formulation Pack of 15 Powder Pillows Fresh and reliable

  • For meter calibration.

  • For visual determination of pH, using test kits. pH 4-10

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.