For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …

Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL…

Marking spot Borosilicate glass 300 mL capacity BOD Bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by…

These 500mL PYREX® aspirator bottles have a tubular sidearm outlet (10mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 4 rubber…

KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…

Offset neck is tool-finished for increased strength and uniform stopper fit; uses number 5 rubber stopper Useful for growing mass cultures and single or monolayer cultures Will withstand repeated sterilization (wet or dry) Capacity 1,000 mL Stacks for easy storage

Create a dropper bottle using a serum bottle with 20mm OD finish Dropper tip is made from PVC with PE cap Dispenses 40

With cork inserted Ideal for use as sample bottles Useful for dry powders, soil samples and specimen storage

These 350mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Sidearm tubulations are 10mm O.D. The side inlet tube on this bottle has a rod sealed to the bottle near the top for extra strength. A 24/40 Standard Taper stopper is used to seal…

Raised graduations indicate approximate capacities in milliliters Accepts standard stoppers and seals Manufactured from WHEATON 400 borosilicate glass that conforms to USP Type I requirements

Ideal for determining the weight of solid samples. KIMAX® bottle with a plug-style, closed bottom stopper that fits into an internally ground body Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

KIMAX glass hose connection outlet is fused to the bottle. Accepts 5/16" I.D. flexible tubing With white enamel marking spot Glass conforms to ASTM E438, Type I, Class A

These 42mL PRYEX® low form weighing bottles have an external 60/12 Standard Taper joint style opening. The closure style cap fits over the externally ground body.

CLEARANCE SALE! Original Price: $1010.89 Clear / Flint Straight Sided Round Jars are designed without shoulders for maximum storage capacity and content visibility. Attached black phenolic (thermoset) caps with pulp/vinyl liners are perfect for general use. The liner is made of…

Contaminants such as loose dirt, carton lint, aerosols, and fine glass particles are removed by the Vacuum and Ionization process.   V & I Cleaning Process: Compressed air passes through a condensate separator and coalescing filter to remove aerosols and fine dust…

These standard 18-410 G.P.I. thread screw caps are replacement caps for the No. 5650 PYREX® volumetric flasks. Caps have a durable cone-shaped polyethylene liner Poly-seal cap insures a leak-resistant closure and no contamination when working with most common reagents

Corning glass milk dilution wide mouth bottle (approximately 28 mm opening) eases the additions of dry solids or liquids. The bottle has a phenolic screw cap with a rubber liner that will withstand wet sterilization (121°C). The bottle meets the requirements for milk dilution bottles stated in…

These 125mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Bottles have large hexagonal bases for stability Sidearm tubulations are 8mm O.D A 29/42 Standard Taper stopper is used to seal the top to the base These…

These 2mL PYREX® specific gravity bottles are unadjusted for calibration in the laboratory.

Square shaped amber glass reagent bottle Capacity: 1000mL Amber glass bottle is ideal for light sensitive samples Includes 45mm blue screw cap Designed for use with Socorex Calibrex™ 520 and 521 bottle-top dispensers

Safety coating reduces breakage Not autoclavable Bottle is coated with plastisol to reduce bottle breakage and chemical spills. When used under low, positive pressure it reduces the risk of failure. Bottle is manufactured from low extractable Wheaton borosilicate glass and are not autoclavable.

These 500mL PYREX® gas washing bottles are replacements for 31760-500EC (5632D58) and 31760-500C (5632D64) These bottles have large hexagonal bases for stability

KIMAX bottles conform to ASTM E438, Type I, Class A glass. Bottle necks are ground to accept flathead color-coded PTFE stoppers. Replacement stoppers are 41941.

Of Wheaton “810” soda lime glass Capacity 100 mL Provided with a glass applicator rod and a glass cap, which is ground to fit the shoulder of the bottle to form a seal

Height (mm) 103 Diameter (mm) 47 Bottle Material Plastic Bottle Style Serum Bottle / Vial Style Serum Capacity (mL or oz) 120mL or 4.06oz Bottle Color Natural Mouth ID x OD (mm) 13 x 20 Plastic Material …

KIMAX bottle with a plug-style, closed bottom stopper that fits into an internally ground body. Designed from Federal Specification NNN-B-1493, Type I, Style I requirements Plug-style glass stopper with a closed base fits into the neck of the bottle and seals it to secure contents and…

For use with Kimax brand 03-422 Series weighing bottles. Cap-style stopper only Standard taper joint: 29/12 Size: 33 x 24mm

KIMAX bottle used in the determination of specific gravity for a large variety of semi-solid materials and emulsions, such as road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); drying oils, varnishes, resins, and related materials (ASTM D1963); water and brine (ASTM D1429); and…