Bottles

Compare Tool

Select up to 3 products

1 - 32 of 32
Sort
View
Show
  • Leakproof, chemical resistant Heavy-threaded necks with tamper-proof, tear-lock closures High-density polyethylene with deep-shelled, blue polypropylene closures Ideal for storing or shipping of samples

  • Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…

  • Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…

  • For easy and continuous aseptic vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes. To use, simply insert a pipette tip, Pasteur pipette or serological pipette into the collection tube and connect vacuum line to vacuum source. …

  • Low-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL

  • Low-density polyethylene Cap snaps on easily and continues to hold a tight seal even after repeated use Tip opening is 0.76mm (0.030")

  • Measure Liquids from 5mL to 25mL Just By Squeezing the Bottle Squeezing forces the desired volume of liquid through the tube and into the cup. When pressure is released, excess fluid returns into the bottle for spill free pouring. Measure liquids from 5ml to 25ml just by…

  • Extra fine needle point spray Easy-to-squeeze, low-density polyethylene Can be labled with Tech Pens; see part number 1222X42-X49

  • The 16mm (5/8") opening in the cone design allows a delivery tube to be inserted so liquid does not have to be poured out. The shortened lid allows only the cap of the bottle to protrude for safer pouring. Both carriers hold standard US reagent bottles. Shatter resistant polyethylene…

  • Lightweight and sufficiently transparent for observation of contents Screw cap, low stable form Able to attach identification tags or secure cap to bottle to avoid mismatching Plug molded to cap underside sets firmly in bottle mouth, providing excellent seal that does not freeze or…

  • Graduated 250ml polypropylene cylinder with a stable extended base for use in precipitating elements from gas. Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion disc Silicone stopper holds 6.3mm (1/4") O.D. tubes for entrance and…

  • Wide-Mouth; Eliminates Dangerous Drips A unique, 2-piece valve prevents pressure build-up of solvents within these Right-to-Know Safety-Labeled Wash Bottles. Volatiles are vented eliminating solvent drips. They are pre-printed with the Chemical name and formula, the National Fire Protection…

  • Test Tube Capper

    SP Bel-Art

    Eliminates fatigue and soreness of hands and fingers from the repetitive task of applying test tube caps. Test Tube Capper fits comfortably in the palm of your hand. Use tip to apply pressure and securely cap tubes. Capping can be performed with test tubes in a rack or while being held in…

  • Ideal for Staining Slides Low-density polyethylene Can be used as squirt bottles with the supplied tube, and/or as dropper bottles without tube Excellent for use with indicator solutions or dyes

  • This small polyethylene bottle with screw cap is ideal for storing powders or liquids. The 13/425 black phenolic cap forms an extremely tight seal and provides a good chemical barrier. 22mm dia x 41mm H (0.86 x 1.61").

  • Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.

  • Translucent flexible bottles with leakproof design and matched polypropylene closures offer greater visibility than HDPE bottles. Perfect for sampling and general storage of liquids, powders or viscous fluids Bottles 250mL (8oz) and larger feature recycling code molded into base

  • Reduces spills and potential for breakage and injury Threads directly to bottles with GPS No. 38-430 or 38-400 threads This dispenser fits many 2.5 & 4 liters, 5 pint (80 fl. Oz), ½ gallon & 1-gallon jugs and bottles. To use, squeeze the smaller bottle and depress the top button to…

  • Rigid high-density polyethylene, laboratory/pharmaceutical grade bottles have matched polypropylene closures and leakproof design. FDA compliant material Wide mouth design simplifies packaging and storing of liquids and powders Bottles 250ml (8oz) and larger feature recycling code molded…

  • This pouring spout is made to fit 38mm tall buttress closure bottles (0209R59 & 0209R58). Chemical resistant polyethylene spout Small air hole allows fingertip control of pouring speed

  • Wide Mouth Bottles

    SP Bel-Art

    High-density polyethylene bottle with foam lined, white polypropylene cap. Offers excellent chemical and impact resistance Capacity: 4000ml (1 gallon) Closure: 110mm

  • Red Wash Bottles

    SP Bel-Art

    High visibility, red color helps to alert user of hazardous contents. Low density, polyethylene with polypropylene closure. 

  • Low-density polyethylene wash bottle is labeled in highly visible characters Includes approximate volume graduations (50ml to 450ml in 50ml increments) Fill to textured line for 500mL One piece polypropylene cap and nozzle assembly

  • Right-to-Know safety-labeled wash bottles are pre-printed with the full color NFPA diamond and other important safety information providing compliance with OSHA requirements. Unique, patented 2-piece valve prevents pressure build-up of solvents and eliminates dangerous drips. Valve also allows…

  • This bottle carrier is made of 1/4" thick high-density polyethylene. Measures 36 x 18 x 15cm H (14 x 7 x 6"H), with a 25.4mm (1") diameter handle. Divider sold separately Each compartment measures 8.5 x 8.5cm (3-3/8/8 x 3-3/8")

  • Mason Jar Caps

    SP Bel-Art

    70mm O.D. "G" screw caps fit standard Mason Jars. Includes grip lugs and removable leakproof seal ring.

  • Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…

  • Low density buttress screw caps Polyethylene PE caps have 38/430 finish.

  • Add the convenience of adjustable spray to your Scienceware® wash bottles. Trigger sprayers with adapters fit any Scienceware® bottle with an easy to fill, 53mm wide closure and offer convenient, adjustable spray dispensing of a wide range of chemicals including bleach, ethanol, machine oil…

  • Polystormore® Bottles are not suitable for shipping liquids. Space-proficient bottles hold more samples or chemicals in limited shelf space than spherical bottles. Rectangular shape makes them ideal shipping containers for dry ingredients HDPE bottles come with polypropylene screw…

  • These Fritware® Porous Polyethylene Sheets can be cut, sawed, formed, machined, and welded to custom fabricate items made to your specifications. Sheets are medium porosity. 1226C93: Thickness: 3.2mm (1/8"), size: 91 x 91cm (36" x 36") 1226C94: Thickness: 6.4mm…

  • The Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.