Bottles

Compare Tool

Select up to 3 products

1 - 32 of 77
Sort
View
Show

Greenwood

  • PYREX® Media Storage Bottles

    Corning

    Heavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass…

  • PYREX Wide Mouth Storage Bottles

    Corning

    Easily hold wide mouth funnels High thermal shock resistance Sterilize by autoclaving or dry heat Traceability code for easier documentation Permanent white enamel graduations and marking spot Available in three sizes: 500 mL , 1 L and 2 L These PYREX wide mouth storage…

  • Sterile Storage Bottles

    Corning

    Polystyrene media/filler bottles Economical Easy-to-read graduations Sterile Available with low profile, easy grip handle (pictured) and traditional smooth sides Disposable plastic storage bottles are made from optically clear polystyrene and are ideal storage containers…

  • Hubbard-Carmick Specific Gravity Bottle, 25 mL, 24 / 12

    Corning

    For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …

  • PYREX Dropping Bottles

    Corning

    Recommended for use in preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to…

  • PYREX® Round Media Storage Bottles with GL45 PBT Plug Seal High Temperature Cap

    Corning

    These heavy duty PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates…

  • PYREX® Square Media Storage Bottles

    Corning

    Chemical and thermal resistant Graduated Screw cap Bottles are made from PYREX® borosilicate glass for enhanced chemical and thermal resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and…

  • PYREX® Slim Line Storage Bottles

    Corning

    PYREX Slim Line media storage bottles provide easier handling and more efficient storage of media, biologicals, and other aqueous solutions. Features Indented gripping zones along the sides of bottle allow easier and safer handling New cap design permits faster opening and…

  • Corning Media Storage Caps

    Corning

    Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps…

  • PYREX® Aspirator Bottle with Bottom Sidearm

    Corning

    These PYREX® aspirator bottles have a tubular sidearm outlet (15mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 12 rubber stoppers. They…

  • Glass Stoppered Bottles

    Corning

    Narrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…

  • Corning Square Polycarbonate Storage Bottles

    Corning

    Screened white enamel graduations Sterilized by gamma radiation Large white marking spot Break resistant polycarbonate material 45 mm size cap provide greater access for liquid transfer Bottles can be autoclaved once at 121°C and 15 psi Easy opening packaging Available in…

  • Tall Form PYREX Gas Washing Bottles

    Corning

    Tall Form PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and…

  • Square PET Storage Bottles with 45mm Caps

    Corning

    Square polyethylene terephthalate (PET) storage bottles are easier to handle, require less space (13-20%) on the shelf and are ideal for mixing, sampling and storage. PET resin is lightweight, break-resistant and transparent as glass. Bottles use a linerless, one-piece autoclavable orange GL45…

  • Atomizer Chromatographic Reagent 125 ml

    Corning

    These 125mL PYREX® atomizers are used for spraying reagents onto thin layer chromatography plates. They have a full length 24/40 Standard Taper joint between the reservoir and spraying device.

  • Disposable Aseptic Transfer Caps for Plastic Erlenmeyer Flasks

    Corning

    Corning® Erlenmeyer Flask Aseptic Transfer Caps are sterile (10 -6 SAL), individually double bagged and fit the 2L Corning® Polycarbonate Erlenmeyer flasks. These aseptic transfer caps can also be used on Corning 850 and 1700cm 2 plastic disposable roller bottles. Venting port…

  • Falcon®Polystyrene Plug Seal Screw Caps for 50mL Conical Bottom Centrifuge Tubes

    Corning

    Falcon® polystyrene Plug Seal screw caps for 50mL centrifuge tubes are sterile. The caps are sold 50 per pack and 1,000 per case.

  • CellBIND Roller Bottles

    Corning

    Provides enhanced cell attachment Polystyrene construction Easy-Grip vent cap Printed lot numbers aid product traceability Corning® CellBIND roller bottles feature a ribbed design that provides twice the surface area with the same exterior dimensions. Bottles are treated with the patented…

  • PYREX Solution Bottles

    Corning

    PYREX® Suitable for storage of distilled water and standard solutions Of borosilicate glass All have heavy, welted neck but vary in size and shape. Bottles take stopper number 12. PYREX bottles are tough and reliable yet designed with safety in mind. PYREX bottles can…

  • PYREX® Polyethylene Snap Caps

    Corning

    These blue PYREX® polyethylene caps provide an economical closure for some volumetric flasks (See Nos. 5580, 5581 and 5600).

  • Octagonal PET Bottles

    Corning

    Polyethylene terephthalate (PET) bottles are ideal for storage and sampling of media, biologicals, and other aqueous solutions PET resin makes the bottle lightweight and as transparent as glass Break-resistant bottles are an ergonomic and easy-to-handle alternative to glass …

  • PYREX® Low Actinic Media Storage Bottle

    Corning

    Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings.  Glass beads indicate full capacity line. Permanent white enamel…

  • Wide Mouth Milk Dilution Bottles

    Corning

    Square bottle facilitates pipet entry and cleaning; wide mouth for ease in measuring and filling With cut-line graduation mark at 99±1 mL Includes phenolic screw cap, size 40-400, with cemented rubber liner Will withstand sterilization (wet at 121°C) Capacity: 160 mL

  • PYREX Low Weighing Bottles

    Corning

    Short length Standard Taper joints Capacities from 35 to 82 mL These PYREX low form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.

  • PYREX Glass Serum Bottles

    Corning

    Designed specially for handling and storing sterile culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet)…

  • Roller Bottles

    Corning

    Sure traction for best results Non-pyrogenic Sterile Plug-type or quick seal cap for added leak resistance Seamless, one-piece construction and superior optical clarity. Made from virgin polystyrene. Heavier walls, non-serrated traction rings and printed graduations every 50 mL to 1,500 mL,…

  • Aspirator Device,

    Corning

    The Costar® Aspirator is a device using vacuum to safely and aseptically dispose of supernatant from a variety of laboratory vessels. Includes a hand piece to which disposable pipet tips are attached during use Grommet for accessory attachment and single-channel adapter for…

  • PYREX Centrifuge Bottle

    Corning

    Heavy wall Screw cap Particularly useful in handling sputum specimens, this bottle enables digestion, shaking, neutralizing and centrifuging to be performed in one container. The tight-fitting polypropylene screw cap with Teflon® liner reduces the possibility of aerosol escape.

  • Plastic Wide Mouth Storage Bottles

    Corning

    Can be used with Corning bottle top filters These polystyrene bottles are ideal for storage of media, buffers and other aqueous solutions. Bottles are sterile and certified nonpyrogenic. Plug seal caps provide an airtight seal and help minimize the risk of contamination.

  • 8-Channel Adapter for the Costar® Vacuum Aspirator

    Corning

    This is an 8-channel adapter that fits on the Costar® Aspirator (No. 4930) so that it can be used to remove media and solutions from 8 wells simultaneously on a 96 well plate.

  • PYREX Gas Washing Bottles

    Corning

    PYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.