Compare Tool

Select up to 3 products



  • Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…

  • Add the convenience of adjustable spray to your Scienceware® wash bottles. Trigger sprayers with adapters fit any Scienceware® bottle with an easy to fill, 53mm wide closure and offer convenient, adjustable spray dispensing of a wide range of chemicals including bleach, ethanol, machine oil…

  • Wide Mouth Wash Bottles

    Bel-Art - SP Scienceware

    Low-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL

  • Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…

  • Extra fine needle point spray Easy-to-squeeze, low-density polyethylene Can be labled with Tech Pens; see part number 1222X42-X49

  • Acid/Solvent Bottle Carriers

    Bel-Art - SP Scienceware

    The 16mm (5/8") opening in the cone design allows a delivery tube to be inserted so liquid does not have to be poured out. The shortened lid allows only the cap of the bottle to protrude for safer pouring. Both carriers hold standard US reagent bottles. Shatter resistant polyethylene…

  • Vacuum Aspirator 1.0gal

    Bel-Art - SP Scienceware

    For easy and continuous aseptic vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes. To use, simply insert a pipette tip, Pasteur pipette or serological pipette into the collection tube and connect vacuum line to vacuum source. …

  • Scienceware® Dispensing/Drop Bottles

    Bel-Art - SP Scienceware

    Low-density polyethylene Cap snaps on easily and continues to hold a tight seal even after repeated use Tip opening is 0.76mm (0.030")

  • Right-to-Know safety-labeled wash bottles are pre-printed with the full color NFPA diamond and other important safety information providing compliance with OSHA requirements. Unique, patented 2-piece valve prevents pressure build-up of solvents and eliminates dangerous drips. Valve also allows…

  • Scienceware® Indicator Bottles

    Bel-Art - SP Scienceware

    Ideal for Staining Slides Low-density polyethylene Can be used as squirt bottles with the supplied tube, and/or as dropper bottles without tube Excellent for use with indicator solutions or dyes

  • Scienceware® Vacuum Aspirator Bottle

    Bel-Art - SP Scienceware

    The Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…

  • Graduated 250ml polypropylene cylinder with a stable extended base for use in precipitating elements from gas. Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion disc Silicone stopper holds 6.3mm (1/4") O.D. tubes for entrance and…

  • Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…

  • Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.

  • Scienceware® Measure-Matic™ Dispenser

    Bel-Art - SP Scienceware

    Measure Liquids from 5mL to 25mL Just By Squeezing the Bottle Squeezing forces the desired volume of liquid through the tube and into the cup. When pressure is released, excess fluid returns into the bottle for spill free pouring. Measure liquids from 5ml to 25ml just by…

  • Scienceware® Bottle Carrier

    Bel-Art - SP Scienceware

    This bottle carrier is made of 1/4" thick high-density polyethylene. Measures 36 x 18 x 15cm H (14 x 7 x 6"H), with a 25.4mm (1") diameter handle. Divider sold separately Each compartment measures 8.5 x 8.5cm (3-3/8/8 x 3-3/8")

  • Precisionware® Wide Mouth HDPE Bottles

    Bel-Art - SP Scienceware

    Rigid high-density polyethylene, laboratory/pharmaceutical grade bottles have matched polypropylene closures and leakproof design. FDA compliant material Wide mouth design simplifies packaging and storing of liquids and powders Bottles 250ml (8oz) and larger feature recycling code molded…

  • Scienceware® Small Bottle, PE

    Bel-Art - SP Scienceware

    This small polyethylene bottle with screw cap is ideal for storing powders or liquids. The 13/425 black phenolic cap forms an extremely tight seal and provides a good chemical barrier. 22mm dia x 41mm H (0.86 x 1.61").

  • Polystop™ Dropper Bottles

    Bel-Art - SP Scienceware

    The dropper pulls out leaving the polypropylene stopper to protect the neck of the glass bottle. All parts disassemble to clean. Per each. Glass dropper tube. Soft vinyl bulb Ground standard taper neck in bottle "Bumper" opening protects the tip of the glass dropper Capacity: 100ml (3.4oz)

  • Wide-Mouth; Eliminates Dangerous Drips A unique, 2-piece valve prevents pressure build-up of solvents within these Right-to-Know Safety-Labeled Wash Bottles. Volatiles are vented eliminating solvent drips. They are pre-printed with the Chemical name and formula, the National Fire Protection…

  • Polystormor® Square Wide Mouth Bottles

    Bel-Art - SP Scienceware

    Polystormore® Bottles are not suitable for shipping liquids. Space-proficient bottles hold more samples or chemicals in limited shelf space than spherical bottles. Rectangular shape makes them ideal shipping containers for dry ingredients HDPE bottles come with polypropylene screw…

  • Reduces spills and potential for breakage and injury Threads directly to bottles with GPS No. 38-430 or 38-400 threads This dispenser fits many 2.5 & 4 liters, 5 pint (80 fl. Oz), ½ gallon & 1-gallon jugs and bottles. To use, squeeze the smaller bottle and depress the top button to…

  • These Fritware® Porous Polyethylene Sheets can be cut, sawed, formed, machined, and welded to custom fabricate items made to your specifications. Sheets are medium porosity. 1226C93: Thickness: 3.2mm (1/8"), size: 91 x 91cm (36" x 36") 1226C94: Thickness: 6.4mm…

  • Test Tube Capper

    Bel-Art - SP Scienceware

    Eliminates fatigue and soreness of hands and fingers from the repetitive task of applying test tube caps. Test Tube Capper fits comfortably in the palm of your hand. Use tip to apply pressure and securely cap tubes. Capping can be performed with test tubes in a rack or while being held in…

  • Red Wash Bottles

    Bel-Art - SP Scienceware

    High visibility, red color helps to alert user of hazardous contents. Low density, polyethylene with polypropylene closure. 

  • Translucent flexible bottles with leakproof design and matched polypropylene closures offer greater visibility than HDPE bottles. Perfect for sampling and general storage of liquids, powders or viscous fluids Bottles 250mL (8oz) and larger feature recycling code molded into base

  • Wide Mouth Bottles

    Bel-Art - SP Scienceware

    High-density polyethylene bottle with foam lined, white polypropylene cap. Offers excellent chemical and impact resistance Capacity: 4000ml (1 gallon) Closure: 110mm

  • Mason Jar Caps

    Bel-Art - SP Scienceware

    70mm O.D. "G" screw caps fit standard Mason Jars. Includes grip lugs and removable leakproof seal ring.

  • Scienceware® Pouring Spout

    Bel-Art - SP Scienceware

    This pouring spout is made to fit 38mm tall buttress closure bottles (0209R59 & 0209R58). Chemical resistant polyethylene spout Small air hole allows fingertip control of pouring speed

  • Buttress Cap Bottles

    Bel-Art - SP Scienceware

    Low density buttress screw caps Polyethylene PE caps have 38/430 finish.

  • Volume Labeled Narrow-Mouth Wash Bottles

    Bel-Art - SP Scienceware

    Low-density polyethylene wash bottle is labeled in highly visible characters Includes approximate volume graduations (50ml to 450ml in 50ml increments) Fill to textured line for 500mL One piece polypropylene cap and nozzle assembly

  • Scienceware® Square Bottles

    Bel-Art - SP Scienceware

    Leakproof, chemical resistant Heavy-threaded necks with tamper-proof, tear-lock closures High-density polyethylene with deep-shelled, blue polypropylene closures Ideal for storing or shipping of samples

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.