Wash Bottles

Compare Tool

Select up to 3 products

1 - 32 of 67
Sort
View
Show

Greenwood

  • Scienceware® Right-to-Know 4-Color Safety-Labeled Wash Bottles

    Bel-Art Products

    Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…

  • GHS Compliant, Multi-Lingual Wash Bottles

    Globe Scientific

    GHS Compliant Pre-Printed Wash Bottles Compliant for June, 2015: bottles meet the latest requirements of GHS and OSHA HAZCOM 29 CFR 1910.1200 for workplace labels All bottles include Globally Harmonized Pictograms and signal words, NFPA diamond, risk phrases and safety information …

  • Plain Wash Bottles

    Globe Scientific

    Produced from low density polyethylene (LDPE) Fitted with color-coded one-piece polypropylene (PP) closures that maintain their shape in use Feature square shoulders and a wide mouth for easy spill-free filling Closures feature precison jet-tip aperture for fine control

  • Narrow-Mouth Right-to-Know LDPE Wash Bottles

    Thermo Scientific Nalgene

    Meet regulatory labeling requirements for chemical containers with Thermo Scientific™ Nalgene™ Narrow-Mouth Right-to-Know LDPE Wash Bottles, which use standard, instantly recognizable symbols and colors. These low density polyethylene bottles are flexible for easy dispensing and…

  • Scienceware® 2-Color Safety-Labeled Wash Bottles

    Bel-Art Products

    Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…

  • Narrow Mouth Wash Bottles

    Thermo Scientific Nalgene

    One-piece stem and cap Nalge 2401 Narrow neck Made of lower density polyethylene with polypropylene screw cap and stem. Stem and cap are molded in one piece.

  • Vented Unitary Safety Wash Bottles

    Thermo Scientific Nalgene

    For acetone, ethyl alcohol, methanol, isopropanol, distilled water and sodium hypochlorite (bleach) Leakproof, easy-to-fill, wide-mouth design Color-coded caps Sputter-free dispensing 250 ml , 500 ml or 1 L capacities Vented Unitary™ wash bottles keep hazardous…

  • Wide Mouth Unitary Wash Bottles

    Thermo Scientific Nalgene

    Design eliminates contamination and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than…

  • Wash Bottles with Integrated Spout, LDPE

    Globe Scientific

    Material: Bottle: Low Density Polyethylene (LDPE) Cap: Polypropylene (PP) Easy grip, stable shape Dispensing tube with closure cap Screw cap lid & separate plug stopper provide a leak-resistant seal Tagging points for security Food grade These easy-squeeze…

  • Right-to-Understand Safety Wash Bottles

    Thermo Scientific Nalgene

    Prevent chemical accidents in the lab with Nalgene™ Right-to-Understand LDPE Wash Bottles. Bottles are pre-labeled with chemical identification and safe handling information following the Globally Harmonized System (GHS) specifications as applicable to secondary laboratory containers. Wash…

  • Right-to-Understand FEP Safety Wash Bottles

    Thermo Scientific Nalgene

    Prevent chemical accidents in the lab with Nalgene™ Right-to-Understand FEP Wash Bottles. Bottles are permanently etched with chemical identification and safe handling information following the Globally Harmonized System (GHS) specifications as applicable to secondary laboratory containers.…

  • Do-It-Yourself, Safety Vented Wash Bottles

    Globe Scientific

    Do-It-Yourself DripLok® wash bottles provided with blank write-on panels Indelibly printed in 3 languages (English, French & German) Supplied with adhesive hazard labels

  • Teflon Squeeze-Type Wash Bottles

    Thermo Scientific Nalgene

    Leakproof closure Made of transparent Teflon® FEP with one-piece stem and closure of Tefzel® ETFE Usable for trace metal work; autoclavable Sizes 125/250 mL = cap No. 24; 500/1,000 mL = cap No. 38

  • Scienceware® 4-Color Safety-Vented & Labeled Wash Bottles

    Bel-Art Products

    Right-to-Know safety-labeled wash bottles are pre-printed with the full color NFPA diamond and other important safety information providing compliance with OSHA requirements. Unique, patented 2-piece valve prevents pressure build-up of solvents and eliminates dangerous drips. Valve also allows…

  • Wide Mouth Wash Bottles

    Thermo Scientific Nalgene

    Made of lower density polyethylene with a wide mouth Polypropylene screw cap, size 63 mm and delivery spout are molded in one-piece Draw tube is polyallomer

  • Color-Coded Unitary Wash Bottle

    Thermo Scientific Nalgene

    Wide mouth for easy filling Holds up to 500 mL of liquid Convenient, built-in dispenser won't get lost or contaminated when refilling. Comes as pre-packaged, color-coded assortment with one each: red, blue, white and yellow caps. Custom right-to-know labels included.

  • Right-to-Know, Safety-Vented Wash Bottles with GHS Labeling

    Bel-Art Products

    Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…

  • Wide Mouth Wash Bottles

    Bel-Art Products

    Low-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL

  • Scienceware® Color-Coded Narrow Mouth Wash Bottles

    Bel-Art Products

    Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.

  • Safety Wash Bottles

    Thermo Scientific Nalgene

    With color closure Nalge 2422 Leakproof; 500 mL capacity Molded in translucent LDPE with polypropylene color closure

  • Solvent Venting Wash Bottles

    Dynalon

    Successfully eliminates the hazard of volatile solvent leakage Valve design stops solvent drip Easy to fill wide neck design Label indicates contents (with diagrammatic instructions, precautions and international hazard codes) Low-density polyethylene Unique, two-way valve mechanism stops…

  • Solvent Wash Bottles

    Thermo Scientific Nalgene

    Excellent for use at industrial facilities, environmental, electronic, university and government research facilities and testing labs Nalge 2421 Leakproof; usable temperature 0° to 90°C Wide-mouth, molded in fluorinated polypropylene with fluorinated HDPE closure, stem and tube Silk-screened…

  • Tracker Wash Bottles

    Dynalon

    Azlon’s new high quality wash bottles are supplied complete with unique, write on - wipe off labeling areas. Easy to reuse, time and time again, they are specially designed for full traceability and to meet stringent labeling requirements.  The bottle has been designed with a series…

  • Unitary Wash Bottles

    United Scientific Supplies

    These bottles are made of translucent and Low Density Polyethylene. The distinguishing feature that these bottles contain is the built-in delivery tube making it a one-piece wash bottle. These bottles are graduated on the outer surface to reflect an approximate volume of solution filled or dispensed.

  • Autoclavable Wide Mouth Wash Bottles

    Dynalon

    Autoclavable at 121°C Polypropylene 500mL bottle fitted with one-piece PP closure (34mm neck ID) Closure features precision jet-tip aperture for fine control Dimensions 163mm height x 75mm diameter

  • Wash Bottles, Autoclavable

    Thermo Scientific Nalgene

    Autoclavable, leakproof Nalge 2405 Made of contact-clear polypropylene copolymer with polypropylene screw cap and stem Stem and cap are molded in one-piece 9765N80 wash bottle takes cap number 28. 9765N90 wash bottle takes cap number 38.

  • TLC Sprayer

    MilliporeSigma

    Electro-pneumatically operated TLC sprayer provides: Minimum reagent consumption due to homogenous spray performance Two different spray heads optimized for both low- and high-viscosity solutions Ready-to-use spray solutions fit directly onto the sprayer

  • Thomas Wide Mouth Wash Bottles

    Thomas®

    Assortment Pack- Thomas® Exclusive Economical Color-coded: 5 colors No need to buy large quantities 3 sizes: 125, 250 and 500 ml Versatile There’s no need to buy packages of multiple color wash bottles just to get one of each color. These low density polyethylene wash bottles are…

  • Wash bottle, Ethanol, 500mL, LDPE,multi-lingual,vent,orange, GHS Labeled

    Denville

    Meets the latest requirements of GHS & OSHA HAZCOM 29 CFR 1910.1200 for workplace labels Safety vented Patented DripLok® valve prevents dangerous solvent drips* The specially designed jet-tip provides precise dispensing control

  • LDPE Wash Bottles

    United Scientific Supplies

    These bottles are made of translucent and low density polyethylene (LDPE). Solutions can be dispensed easily by lightly squeezing the bottle. The flexible polyethylene delivery tube can be directed wherever required.

  • Wash Bottles

    Dynalon

    These high quality natural wash bottles are supplied in flexible natural polyethylene and are fitted with a white leak proof, wide neck polypropylene spout closure. The wide neck offers easy spill-free filling, and the acute angled, precision molded dispensing spout, ensures a consistent, downward…

  • Volume Labeled Narrow-Mouth Wash Bottles

    Bel-Art Products

    Low-density polyethylene wash bottle is labeled in highly visible characters Includes approximate volume graduations (50ml to 450ml in 50ml increments) Fill to textured line for 500mL One piece polypropylene cap and nozzle assembly

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.