Large capacity, low form gas washing bottle having a 34/28 standard taper top outer joint. Filter candle is 25mm O.D. x 70mm long allowing a large gas flow to be dispersed throughout the absorbing material. Available with a COARSE OR EXTRA COARSE porosity filter candle. Complete bottle is supplied…

KIMAX bottle for washing or drying gases. Gas enters the bottle through the center tube and exits into the bottom of the bottle. On rising through the washing or drying medium it is thereby washed or dried and passes out of the bottle through the side tube of the bottle stopper. Both inlet and…

Gas washing bottle with standard taper 45/50 cap style stopper and fritted disc angled at 15° for even distribution of gas throughout absorbing material. Available with a coarse or extra coarse fritted disc. Order plastic clip separately.

These 350mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Sidearm tubulations are 10mm O.D. The side inlet tube on this bottle has a rod sealed to the bottle near the top for extra strength. A 24/40 Standard Taper stopper is used to seal…

These 500mL PYREX® gas washing bottles are replacements for 31760-500EC (5632D58) and 31760-500C (5632D64) These bottles have large hexagonal bases for stability

Dreschel, high form with standard taper 24/40 joint on all sizes. Stopper and bottles available separately.

Gas washing bottle with an extra large diameter (60mm) fritted disc sealed into the bottom of the bottle to enable increased gas throughput and uniform gas distribution. Available with coarse fritted disc. The 24/40 standard taper top outer joint accepts a A292440 gas inlet adapter which is…

Tall form gas washing bottle having a standard taper 34/28 top joint, hex base and coarse fritted tube for gas dispersion. Stopper is held in place with two CG-110-02, 18mm stainless steel springs. Springs are supplied when bottle is ordered complete.

Unit contains a fritted disc for more uniform gas distribution throughout the absorbing material. Available in two porosities: extra coarse (170-220 micron) and coarse (40-60 micron) Supplied complete with hooks and two 2” springs Manufactured from 33 expansion, low extractable…

With 25 mm fritted disc diameter. 40/35 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

Gas washing bottle, 270mL with inner coil. Used with 6550 Cyanide distillation apparatus.

PYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42

The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

New design gas washing bottle with the convenience of Ace-Threds. Center washing tube fits into borosilicate glass bottle via #25 Ace-Thred with nylon bushing and FETFE o-ring. Washing tube has #7 Ace-Safe inlet/outlet ports with 1/4-in hose connection

With 25 mm fritted disc diameter. 40/35 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

These 125mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. These bottles have large hexagonal bases for stability. Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. These bottles are a very…

Borosilicate glass bottles with tooled neck to accept a #6 Rubber stopper. Bottles are epoxy coated to help prevent scratching. Bottles and stoppers sold separately. Working capacity is 1/2 actual capacity. Rated at 60 psi @ 20°C.

Fritted disc provides greater efficiency and more uniform dispersion of gas bubbles for complete absorption Tall form, with fused-in fritted disc 20 mm diameter and Standard Taper 40/50 joint Large hexagonal base for stability Tubulation o.d.’s are 8 mm Offered in 125,…

Tall Form PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and…

Tall form gas washing bottle having a standard taper 34/28 top joint, hex base and plain tube for gas dispersion. Stopper is held in place with two CG-110-02, 18mm stainless steel springs. Springs are supplied when bottle is ordered complete.

With screw-connection system; the insertion height of the head is adjustable. Individual parts can also be ordered separately.

These 125mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. Bottles have large hexagonal bases for stability Sidearm tubulations are 8mm O.D A 29/42 Standard Taper stopper is used to seal the top to the base These…

Large disc size provides greater capacity. 125mL size has a 25mm fritted disc.The 250mL and 500mL sizes are fitted with a 30mm disc. Joint is 40/35. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

Graduated 250ml polypropylene cylinder with a stable extended base for use in precipitating elements from gas. Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion disc Silicone stopper holds 6.3mm (1/4") O.D. tubes for entrance and…