labForce High Density Polyethylene (HDPE) Wide Mouth Laboratory Bottles meet the requirements and expectations of the most exacting users. Made from virgin HDPE resin, labForce bottles are durable and break resistant eliminating the shatter risk of glass bottles. The wide mouth opening is perfect…

Teflon FEP Tefzel ETFE Screw Closure Narrow-mouth bottles with a particle level of less than 20 particles per ml at 0.3µm and greater Each bottle is double bagged under Class 10 laminar flow hoods inside a Class 100 clean room Excellent for storing high-purity chemicals …

labForce® Sterile Translucent HDPE Wide Mouth bottles are made of high quality HDPE raw material, and produced in a Class 100,000 grade cleanroom production environment with multiple quality system certifications. Made from natural HDPE, which is non-biotoxic, these bottles have excellent…

Heavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass…

Design eliminates contamination and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than…

These all new Heavy Duty Vacuum Bottles have thick walls to withstand the forces of repeated vacuum applications in the laboratory. Designed for liquid aspiration and transfer operations, the bottles come complete with a polypropylene (PP) cap and TPE gasket for leakproof sealing. The polypropylene…

Provide excellent gas barrier properties for storage and shipping of liquid media, buffers and sera with Thermo Scientific™ Nalgene™ Square PET Media Bottles with Closures. These light-weight bottles are shatter-resistant, sterile and come in a space-saving square design. …

Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Amber glass for light sensitive samples Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and…

Easily hold wide mouth funnels High thermal shock resistance Sterilize by autoclaving or dry heat Traceability code for easier documentation Permanent white enamel graduations and marking spot Available in three sizes: 500 mL , 1 L and 2 L These PYREX wide mouth storage…

Polystyrene media/filler bottles Economical Easy-to-read graduations Sterile Available with low profile, easy grip handle (pictured) and traditional smooth sides Disposable plastic storage bottles are made from optically clear polystyrene and are ideal storage containers…

Leakproof closure Made of transparent Teflon® FEP with one-piece stem and closure of Tefzel® ETFE Usable for trace metal work; autoclavable Sizes 125/250 mL = cap No. 24; 500/1,000 mL = cap No. 38

Pigmented to provide protection for light-sensitive materials Nalge 2106 series Amber HDPE Screw cap Leakproof Complies with U.S. Pharmacopoeia 23 requirements for maximum light transmission

Purchasing assembled bottles reduces sample contamination and streamlines ordering and inventory needs. Polycone caps seal the inner neck of the bottle when screwed in place.

Purchasing assembled jars reduces sample contamination and streamlines ordering and inventory needs. The amber color protects light sensitive materials. The PTFE lined cap is inert and is excellent choice for use with strong acids and corrosive materials.

LDPE Bottles with Screw Caps Round-shouldered low density polyethylene bottles have polypropylene screw caps, and are suitable for storage of many acids, bases, aldehydes and alcohols. Linerless caps have an internal sealing ring for a positive seal.

High density polyethylene Nalge 2120 series Large capacity Leakproof Durable Weighs up to 50% less than same size glass containers For dry materials or water sampling, high-density bottles have size 100 mm polypropylene screw cap. The bottles come individually…

Prevent chemical accidents in the lab with Nalgene™ Right-to-Understand FEP Wash Bottles. Bottles are permanently etched with chemical identification and safe handling information following the Globally Harmonized System (GHS) specifications as applicable to secondary laboratory containers.…

Perform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…

Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…

Assortment Pack- Thomas® Exclusive Economical Color-coded: 5 colors No need to buy large quantities 3 sizes: 125, 250 and 500 ml Versatile There’s no need to buy packages of multiple color wash bottles just to get one of each color. These low density polyethylene wash bottles are…

For storage and shipment of sterile biological reagents Single use Durable, leakproof design Sterilization to 10 -6 SAL using gamma irradiation Contact clarity allows for easy viewing of contents. HDPE resin provides excellent chemical resistance. Packed with linerless…

Glass pipet with rubber bulb For use with bottles listed below or with bottles having similar dimensions

The Corning Gosselin water sample collection bottle is designed to meet water sample collection requirements of the United States EPA and Health Canada. The lightweight polyethylene terephthalate (PET) 125 mL and 250 mL bottles are pre-dosed with pentahydrated sodium thiosulfate, which…

Preassembled with foamed polyethylene lined polypropylene closures. All HDPE bottles and jars are also available with PTFE-lined closures or unlined closures. Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with…

Borosilicate 3.3 hybex glass Autoclavable caps (GL45) & drip rings Permanent enamel graduation markings Large area for bottle marking/identification Autoclavable, reusable and breakage resistant Five cap colors hybex™ reusable media bottles are manufactured from…

Bottle made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop is 44µL ±6µL Radiation grade polypropylene screw caps and tips packaged separately Dropping bottles, natural tips, and white caps are packaged seperately

FOAM PLUGS FOR TEST TUBES AND LABORATORY FLASKS, INDENTI-PLUGS, Economical Open-cell, 1.45 lb. uniform-density foam Breathable and non-absorbent Use over a wide temperature range Autoclavable Chemical resistant Proven safe for algae culturing Identi-Plugs® are…

ALK Sterile Empty Vials (SEV) feature Type 1 glass USP borosilicate, and a latex free stopper. ALK SEVs are produced at a cGMP FDA Manufacturer and USP tested for sterility and endotoxins. Certificate of Analysis available for all production lots and vials are aseptically assembled in an…

Excellent chemical resistance Easy-to-fill Autoclavable Leakproof Bottles and lids are constructed of translucent, rigid polypropylene. Unique closure design eliminates closure back-off. Easy pour container finish permits no-spill pouring.

Screw threads Choice of six liners