Blenders

Compare Tool

Select up to 3 products

1 - 32 of 68
Sort
View
Show
  • Stomacher® 400 Circulator Lab Blender

    Seward

    The world’s leading laboratory paddle blender for food microbiologists Enhanced organism recovery over square paddles Durable & reliable, designed for consistent use The gold standard in laboratory blenders No cross contamination between samples Simple to clean and…

  • Standard Size Stainless Steel Jar For Blenders

    Waring

    Capacity 1 Liter Jar has handle, blending assembly and stainless steel cover

  • Waring® Lab Blenders

    Eberbach

  • Homogenizing Blade Assembly

    Eberbach

    Eberbach Labtools Centrifugal-Flow Blending Assembly, Order No. 8650. Stator, rotator configuration of this blending assembly forces the flow of liquids through cutting blades, causing efficient cell and tissue homogenization via high speed mechanical disruption May be used for…

  • Mini-Container Jars For Blenders

    Waring

    Stainless steel container and base with snap-fit plastic cover Three sizes cover a load of 12 to 250 mL Usable on standard size Waring Blenders Removable 4-blade stainless steel cutting propeller is secured in jar by a standard unit

  • 75 Gram Pulverizer For Blenders

    Waring

    Reduces 10 grams of tablets to powder in 10 seconds at 20,000 rpm PVC vinyl lid Body and pulverizing blades are of stainless steel Fits all Waring commercial laboratory blenders

  • S-Blender-1A

    Corning® Gosselin™

    The Gosselin S-Blender-1A is a high performance blender for microbiological sample preparation. The blender, which is suitable for a range of sample dilutions between 80 and 400 mL, ensures quick and accurate blending of any sample including food, agricultural, chemical, and cosmetic. Easy to…

  • Stainless Steel 7-Speed Blender

    Waring

    Seven-speed blenders feature push-button, SCR control that provides speeds from 3,500 to 22,000 rpm. Blenders include a container, enamel-finish base, lid, and SS blades. The 120 VAC models are UL-listed and have a 6-ft cord with U.S. standard plug.

  • Waring® Blender Containers

    Eberbach

    Blending containers for Waring® Blenders.

  • Two-Speed Motorized Drive Units For Blenders

    Waring

    3392B25 Drive Unit is for 120 V, 50 or 60 Hz, 0.4-hp, with 3-wire cord and plug; as supplied with Thomas number 3390D25 blender, takes 3392D07 series glass jars. 3392B35 Drive Unit is for 240 V, 50 or 60 Hz, 0.7-hp, with 3-wire cord, but no plug; as supplied with Thomas number 3390D35 blender,…

  • Standard Size Blade Unit For 0.4 H.P. Waring Blenders

    Waring

    With three-blade cutting propeller of stainless steel; other metal parts in contact with sample are or corrosion-resistant, chromium-plated brass Complete with bearings, nuts and Neoprene gaskets Overall diameter of cutting blades at widest point is 2 1/4”

  • Explosion Resistant Sealed Blender, 1 L, 2 Speed

    Waring

    40-oz. glass blending jar is heat resistant Lid with removable fill cap for adding ingredients during the blending process Durable, epoxy, powder-coated, zinc die-cast housing Heavy-duty 0.7 HP motor Stainless steel blade Dripless pour spout

  • Model 8575 SS Micro Blending Container

    Eberbach

    Stainless Steel; Micro Container. Working capacity of 3 ml min. to 30 ml max. Container and cutting assembly are stainless steel with Teflon gaskets for screw cover and threaded sampling plug. Base is cast aluminum providing a stable support and heat sink. Entire container can be pre-chilled to…

  • Metal Screw Cap For Blenders

    Eberbach

    Size No. 100, with pulpboard liner, for 3392J05 and J10 Glass Jars

  • One-Gallon 3.75 HP Food Blender

    Waring

    Ultra heavy-duty 3.75 HP commercial motor – perfect for large loads and long blending times 3-speed selection and MAX PULSE to chop and mix Easy-to-clean and easy-to-use electronic membrane keypad 3-minute countdown timer with automatic shutoff – start the blender and go attend…

  • Variable Speed Control For Blenders

    Waring

    Controls blender speed Stir, mix, or blend from 0 to blender’s maximum rpm. Use with blenders up to eight amps. Includes on/off switch and 3-wire grounded cord. 110 V AC, 8 amps.

  • Hazardous Location Laboratory Blender Motor

    Waring

    UL listed for use in Class 1, Group D hazardous locations 18,500 rpm (no load) Totally enclosed - single phase, one speed universal motor Maximum ambient temperature rating 40°C Natural finished aluminum and steel housing Blender is designed to prevent the electrical arcing and heat…

  • BagClip® Closing Clips

    Interscience

    BagClip® temporarily closes all types of bags, avoiding intermediary weldings. Thanks to the three-point closing system, closing is quick, water- and air-tight. BagClip® 80/100 mL For 100 mL bags Size: 9 x 4 x 19 cm BagClip® 400 mL For 400 mL bags Size: 10 x 8 x 25 cm …

  • Replacement Parts For One-Gallon Blenders

    Waring

    3402G21 blade unit includes stainless steel cutting propeller, shaft, bearing and stainless steel washer; does not include external lock nut or Teflon ® washer. 3402G25 blade is the four-bladed stainless steel cutting propeller only.

  • 4-Liter Laboratory Blender

    Waring

    Easy-to-clean electronic membrane panel Two handles for safer, easier lifting, pouring and carrying Removable dishwasher-safe jar pad The LBC15 four-liter laboratory blender features a sealed, precision ball bearing system for a long service life. 3.75 HP motor offers 3 speeds plus pulse. High…

  • JumboMix® 3500mL Lab Blenders

    Interscience

    JumboMix® 3500 VP, The Essential Variable blending speed (1.5 - 6 strokes/sec.) Variable blending time (1sec. - 1h or open running) Adjustable blending power Drip tray (option) JumboMix® 3500 VW, High Accuracy Window door Variable blending speed (1.5 - 6…

  • Semi-micro Blending Assembly for Waring

    Eberbach

    Semi micro Blending Assembly, Order No. 8730. As supplied with blending containers #8485, 8580, 8581 and 8590 Overall diameter of stainless blades 15/16” Conventional Blending Assemblies are supplied with many Waring® and Eberbach blending containers. Blades are stainless steel and vary…

  • Two-Speed Laboratory Blender With Timer

    Waring

    Powerful, 2-speed stainless steel blender has pitcher type handle and plastic lid with clear central access cap Low speed 15,600 rpm - high speed 20,000 rpm Working capacity 180 -1,900 mL Motor is series-wound, fan-cooled, with permanently lubricated bearings Overall dimensions 6 1/2”…

  • 12-Speed Blender Accessories And Replacement Parts

    Osterizer

    3406C30 plastic mini blend jars hold 1 pint and include screw caps 3406C45 blade unit includes a synthetic rubber gasket, Thomas number 3406C52

  • Standard Size Borosilicate Glass Jars For Blenders

    Waring

    Capacity 1,250 mL ; with integral glass handle 3392D07 glass jar includes cover and 3392E05 blade unit for Waring blenders with both 0.4 and 0.7-HP motors 3392D26 glass jar is without cover or blade unit

  • Stomacher® 4500 BAM

    Seward

    A versatile Stomacher® designed for the BAM testing procedure as well as large volume blending and extraction. Expanding the food testing focused blenders, the Stomacher® 4500 BAM is the perfect tool for larger volume BAM testing procedures for extraction from 375g composite…

  • Foam Arrester

    Waring

    Foam Arrestor for use in Waring SS515 and SS510C Lab Containers

  • Waring® Blender Parts

    Eberbach

    Replacement parts for Waring® Blenders.

  • Black 2-Piece Lid for Blenders

    Waring

  • Wrench set for Blending Assemblies

    Eberbach

    Eberbach Labtools Wrench Set for Waring blending assemblies Order No. 8770 For removing and installing blending assemblies Consists of 5 wrenches: (A) for cap nut to secure the blades; (B) for large nut which secures assembly in container (2 wrenches supplied - 7/8” and 15/16”); (C)…

  • Blending Assembly

    Waring

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.