KIMAX® Low Form Griffin glass beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal shock. They have been a staple in research laboratories for many generations. Thick, slightly flared, beaded top, with a spout…

Our beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.

Seamless stainless steel construction with pour spout Pour spout allows for easy transfer of liquids Capacity full-mark near top of beaker assures accurate measuring Dimensions are listed in O.D. x Height

Chemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…

PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…

Thick uniform walls throughout Extra wall thickness built into evenly tooled top rim Prolonged life expectancy Not recommended for use on hot plates where significant thermal gradients exist Durable matte finish marking area with white graduated scale KIMAX beaker with thick…

Chemically resistant Autoclavable Less rigid than reusable type Liquid level can be easily seen through translucent wall Low form beakers have spout and ribs on rim Size 15 mL graduated in 5 mL and 18 oz. intervals; sizes 30 and 50 mL in 5 mL and 14 oz.; sizes 100 and 150 mL in 5 mL and 12…

Transluscent polypropylene beakers printed with blue graduations.

These tri-pour plastic beakers range from 50mL to 1000mL. They are unbreakable and can be used with commonly used acids, solvents and alkalis. The laboratory beakers can be autoclaved and are reusable, yet are inexpensive enough to be disposable. All six sizes are graduated in mL. Clarified…

Plastic, with glass-like clarity, strong and impact-resistant Low form with spout Autoclavable Usable continuously to 150°C, intermittently to 175°C Excellent chemical resistance, although attacked by powerful oxidizing agents and affected by prolonged exposure to hydrocarbons, ethers, etc.…

Measures feature convenient handle and graduations in milliliters and ounces on inside of cup.

Beakers are made from 316L stainless steel and available in capacities of 1, 2, 3, and 5 liters. Beakers have solid bar sanitary handle, easy-pouring beaker-spout, and graduation marks. All beakers have a seamless sanitary interior and standard 10 Ra finish. Features: Beakers have solid…

Beaker, PP, 2000mL, Tapered Sides, Print Graduations

Seamless stainless steel construction With turned rim and parallel sides Without spout Stainless steel lids offered separately Beaker dimensions are listed in inches by H x O.D. x I.D.

Disposable, translucent polystyrene, resistant to diluted or weak acids, alcohols and bases Usable to 200°F, with four-way pour spouts Smaller sizes suitable for use as sampling cup for atomic absorption units, flame photometers and blood cell counters. Graduations on 150 mL and larger,…

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…

Borosil® Tall-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from…

Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.

Disposable graduated polypropylene construction Flat bottom for magnetic stirring (not for use on hot plates) Chemically resistant Autoclavable Constructed with sloping sides that allow nesting for storage Unique triangular flanged rim with notches forms three…

Beakers offer ±5% accuracy All beakers are transparent for clear content visibility and graduated for easily estimating volumes Molded-in pouring spout and rolled-lip creates a dripless working environment Beakers are constructed of polypropylene and are resistant to most commonly used…

Made of borosilicate glass, these laboratory beakers are fully jacketed to allow temperature control over a wide range. They are similar to a standard Griffin Beaker, but do not have a pouring spout.

Tri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.

Low form beakers with spout, made of borosilicate glass, graduated as per ASTM-E960. Eisco Labs Borosilicate glass has the following heat tolerances Strain Point -515°C  Annealing Point 565°C  Softening Point 820°C.

A tall beaker with spout to facilitate pouring. For convenience, these beakers are graduated to indicate their approximate content.

Chemical resistant Teflon® PFA Rigid, injected molded walls Temperature range: -270°C to 250°C Autoclavable

1/2 liter six-pack and matching 2 liter pitcher For lab use, handle makes an ordinary beaker easier to use Ideal in the office or at home for hot and cold drinks The KONTES LABMUG and Pitcher are made from Berzelius glass beakers and have solid rod handles. Both the mug and the…

Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New style beakers feature tapered spouts for easier pouring of solutions.

Save money and space by purchasing a variety of sizes without ordering full case quantities of each item.  An assortment of popular sizes from our 14005 heavy-duty, low form beaker series. The pack consists of four beakers (one each) in sizes of 250 mL, 400 mL, 600 mL and 1000 mL. Ideal for…

Unaffected by virtually all chemicals Isostatically molded from virgin polytetrafluoroethylene Machine finished, smooth surface allows for easy cleaning and eliminates contamination Withstands temperatures from cryogenic range to 260°C Resists adhesion by practically all…

Beaker, PP, 1000mL, Tapered Sides, Print Graduations

Our Berzelius (tall form) beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is…