Borosil® Low-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from…

Thick uniform walls throughout Extra wall thickness built into evenly tooled top rim Prolonged life expectancy Not recommended for use on hot plates where significant thermal gradients exist Durable matte finish marking area with white graduated scale KIMAX beaker with thick…

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…

Chemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…

Seamless stainless steel construction With turned rim and parallel sides Without spout Stainless steel lids offered separately Beaker dimensions are listed in inches by H x O.D. x I.D.

A tall beaker with spout to facilitate pouring. For convenience, these beakers are graduated to indicate their approximate content.

Measures feature convenient handle and graduations in milliliters and ounces on inside of cup.

A safer alternative to glass or traditional straight-sided beakers plus the chemical resistance of Teflon® Molded handle provides easy, safe handling and pouring Temperature range: -270° to +250°C Easy to clean Thick, rigid walls are translucent for easy…

Polypropylene construction Sizes range from 50 to 5000 mL Thomas Low-Form Griffin Beakers have easy-to-read screened graduations plus size code, resin code, maximum use temperature and "No flame" symbol. Ribs make stacking easy. Beakers meet ISO/DIS 7056 International…

Tri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.

Economical and convenient starter kit or refresher set.  Includes an assortment of popular plastic labware items. All items in the set, except wash bottles, are autoclavable.  An excellent value, this set includes 26 labware items in addition to 12 plastic tubes.  Contains: 5 Beakers…

Low form beaker made of quartz. Non-graduated with pouring spout. Beaker can be used at temperatures to 1000°C.

Low form Griffin beakers have reinforced rims, uniform wall thickness, and spouts designed for excellent pouring Approximate volume graduations guide measuring/ mixing Large matte area for pencil markings

These borosilicate glass beakers feature an attached handle and a smooth rim. The molecular structure of caffeine is enameled in white on one side, and the other side has dual metric graduations. 600ml Tall Form.

Seamless construction allows for safe transfer to liquids. Capacity full mark near top of beaker assures accurate measuring. Griffin style beaker 3000 mL capacity

Corning 1010 Handle attached by an adjustable, stainless steel strap which fits securely into a shallow groove molded in upper part of beaker Beaker (1530K40) fitted with molded glass handle which facilitates pouring. Replacement beaker (1530K50) supplied without handle or strap.

Special no-drip pouring spouts Constructed of chemically resistant, autoclavable polypropylene For general laboratory use. Will withstand temperatures up to 120°C. Graduated in mL.

KIMAX beaker with a slightly flared top and a thick reinforcing bead. All sizes have a durable matte finish area for marking with an ordinary pencil and easy to read white scales to indicate approximate volumes. Designed from ASTM Specification E960, Type IV requirements.

These disposable, yet sturdy polypropylene beakers feature three pouring lips for drip-less dispensing. Beakers are graduated in both ounces and ml. Assortment of 5 each 50ml, 100ml, 250ml, 400ml, 800ml, and 100ml Tri-Pour Beakers.

Sterilizable Chemically unreactive Rim can be squeezed to form pouring spout Reusable but economically priced for one-time use Resistant to temperatures up to 121°C (250°F). Resistant to most solvents, acids, alkalies, salts, organics and biologicals. Cups are available…

These tri-pour plastic beakers range from 50mL to 1000mL. They are unbreakable and can be used with commonly used acids, solvents and alkalis. The laboratory beakers can be autoclaved and are reusable, yet are inexpensive enough to be disposable. All six sizes are graduated in mL. Clarified…

Similar to CG-1103, but with a larger opening at the top of the jacket and a shorter overall height. Width to Height ratio on all sizes is 2:1. Beakers also have a FLAT Bottom on both the inner and outer vessel. Hose Connections have an O.D. of 10mm at the largest serration.

100 ml beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser. Goldfisch Fat Extractor Accessories and Replacement Parts include glassware, gaskets and other components. 3.25"…

Jacketed Reaction Beakers/Temp Controlled Beakers are designed for laboratory applications requiring a variety of temperature-controlled reactions. Useful in biological and chemical reactions including titrations, enzyme digestions, and synthetic organic reactions. A conical lower interior…

For the majority of applications the standard polypropylene 100mL beakers are ideal. These beakers offer the advantages of being more robust than traditional glass beakers, having convenient graduation marks, and being essentially disposable.

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic…

Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New style beakers feature tapered spouts for easier pouring of solutions.

Polypropylene beakers feature easy to read silk screened printed graduations. Beakers are autoclavable. Tapered stacking style saves space and makes it easy to handle.

Jacketed beaker with one upper and one lower hose connection on opposite sides. Also available with Ace-Safe connections. All are without a pouring spout.

An ideal starter set for any laboratory, this set contains 5 plastic beakers in sizes 50ml, 100ml, 250ml, 500ml, and 100ml

Product Dimensions (l x w x h) : 0.883x0.805x1.065in Isostatically molded beakers from virgin Polytetrafluoroethylene and machine finished to give a smooth surface for ease of cleaning and eliminate contamination. 20 mm diameter beaker supplied with pouring spout. Virtually immune to…

Griffin low form polypropylene beakers have a “no-drip” spout for easy pouring. They are translucent, chemical resistant and will stack without sticking together. Raised numeric graduations show approximate volume (± 5%) All sizes are steam autoclavable at 121°C (250°F) Microwavable