Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological,…

Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling. 6 oz. bag has 4 oz. fill line.…

Sterile (gamma-irradiated) polyethylene bags 65µm thick for high-impact strength (9.2MPa tensile, 27.1MPa ultimate) even at low temperatures Permeability (g/m2/24 hr.): 1.2 water vapor, 12,000 oxygen, 2000 carbon dioxide Closure bags feature wire closure strip across bag top and…

Autoclavable bags have one long flap to facilitate easy opening. When picking up individual pieces of waste that need to be discarded, the bag is turned inside out, over the hand, then turned right side out with waste safely inside the bag. Measures 22 x 28cm (8 1/2 x 11"). 100 per pack. …

Bright red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C…

Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read…

Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling.  

Polyester Three-Side-Seal Barrier Pouch Ampac's 400 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 400 Series SealPAKs are 2.5 mils…

Economical and convenient, this benchtop disposal system is perfect for collecting pipette tips, microcentrifuge tubes, etc. during daily use. Rectangular steel wire frame holds a polyethylene bag 22 x 28cm (8-1/2 x 11");  coated in easy to clean, durable, orange color epoxy …

The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish virtually eliminates ink smearing, and provides a surface that will accept a variety of…

Safe and convenient biohazard disposal 0.05 mm, 2 mil polypropylene Autoclavable at 121°C Transparent For maximum protection and convenience when disposing of biohazardous waste. Three sizes hold 65, 200 or 240 standard petri dishes. Ideal for autoclaving discarded membrane filters, culture…

The original zip bags with the Red Color Line™ Low density polyethylene Leak resistant High chemical compatibility Patented zipper closure Only Minigrip bags are identified by The Red Color Line, which signifies quality bags with an easy open/close zipper feature and…

No matter how big the sample, we have the bag for it. At Labplas, we offer a multitude of sizes including large format bags, with or without our closure system.

Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch…

Polyester Three-Side-Seal Barrier Pouch Ampac's 500 Series SealPAK is a 2ply laminated structure consisting of polyester and polyethylene (PET/PE). These boilable and freezable pouches can sustain temperatures from -56 to 115°C (-70 to 240°F). 500 Series SealPAKs are 4.5 mils…

Biohazard specimen transport bag 6" x 9" Score line for quick opening Zipper closure Attached document pouch

Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for…

Sterile polyethylene bags with sodium thiosulfate Disposable, transparent bags for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples…

For transporting Whirl-Pak® bags in upright position Plastic coated Double grid design Racks have a second grid 1” below the top to keep bags upright.

These high temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard…

Universal bags are ideal for homogenous suspension and suspension sampling with pipets. Lot number on each filter bag. Non-woven filter for stronger filtration power. Sterility Assurance Level (SAL) 10 -3

Specifically designed for use with homogenizer blenders Easy and efficient sample testing Made from extra-heavy polyethylene Perforated polyethylene filter layer, sealed into perimeter of sides and bottom, allows sample to be placed into bag on either side. Liquid will transfer…

These bags are designed for the safe transportation of specimens and documentation. Each bag is printed with the biohazard symbol and offers checkmark boxes to indicate special handling instructions. 2 mil gauge polyethylene (PE) Attached document compartment Zipper closure allows repeated…

Our paper self-seal pouches feature all of the benefits of our regular paper pouches without the need to heat seal. Our extra-strength adhesive provides heat-seal performance with self-seal convenience.

BioClean Pharma Covers™ provide protection from environmental impurities during storage, use and transportation. They also minimize the need for autoclave tape during wrapping and save time when prepping glassware, tubing etc for autoclaving. Easy removal minimizes particulate generation and…

Clavies® bags offer maximum protection and performance for autoclavibility. The durable .05mm thick PP bag is filled with used labware such as petri dishes, membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri…

The safe way to autoclave your contaminated products Wide range of volumes Each bag is 40 µm thick

Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275°F (135°C) Imprinted with the standard biohazard symbol Welded seams increase durability and protection Bags feature an…

For Homogenizer Blenders Specially designed for use with homogenizer blenders Whirl-Pak® sample bags are specially designed for use with homogenizer blenders. They are made from extra-heavy polyethylene with a strong perimeter seal. New size 1303N29 features a filter layer to separate the…

Stand-Up Sample Bags The Whirl-Pak® Stand-Up Bag makes sample handling and testing much easier because it gives users the ability to perform important laboratory functions with both hands, because the bag will stand completely by itself. No rack or other holder is needed to keep the bag upright.…

Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.