3-Ply Earloop Surgical Mask  

ProGear's NIOSH and FDA approved N95 Respirator is intended to protect both patients and health care workers from the transfer of microorganisms and airborne particulate materials. Features: Filters out 99% of particles down to 0.1 microns Snugly conforms to many different…

If you have skin sensitivity, choose the CoolOne Sensitive Skin facemask. These facemasks are hypoallergenic and free of pigments and dyes. The patented Magic Arch™ support strip holds the mask away from the nose and mouth to create a larger breathing chamber to enhance user comfort. For a…

The ShieldMate mask and shield combination adds the security of eye protection. The 5-mil shield is ultrasonically welded to the mask. The 7-inch hypoallergenic soft disposable surgical facemask secured with soft knit ear loops features an anti-fog foam strip and Magic Arch™ supports.

CE-Force disposable 3ply non-woven facemasks are made of polypropylene materal as outer layers with a high filtration melt-blown polypropylene material as the filtering layer and a malleable flat noseband.        …

MedPlus Procedure Masks combine high breathability with exceptional filtration efficiency, while offering fluid resistance against bodily fluids and others. This 3-layer pleated mask is hypoallergenic and features an adjustable nose piece and non-latex earloop for easy donning and added comfort. …

With Two Knitted Headbands Low-linting apertured polyethylene film outer layer provides protection from contamination Excellent bacterial and particle filtration combined with good breathability Large breathing chamber BICOSOF fabric inner facing provides comfort Recommended…

For workers who rely on consistent quality industrial clothing to protect them from workplace risks and do their job more effectively. The Edge™ 67-150 lab coat series has a three-layer SMS fabric that is a balance of breathable protection, softness and comfort. The multi-layer…

Tychem® 10000 hazmat suits exhibit excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem®…

Made from 4.5 oz. Nomex IIIA Fabric Concealed snap front and neck closure Black lay-down collar for easy recognition as a CP lab coat FR-only knitt cuffs -- safer than typical open cuff Splash-resistant pass-throughs Pockets include one chest pocket and two lower pockets with…

Disposable full coverage cleanroom bouffant cap. Lightweight and cool/breathable fabric. Trimmed with a latex free elastic band for a comfortable snug fit. 100% virgin non-linting spunbonded polypropylene. Elastic band is fully encapsulated by polyester thread for added comfort. Individually…

The CE-Force Basic disposable shoe covers are made of a polypropylene fabric and are 100% latex and silicone free. They are excellent for transitioning between “clean” and “unclean” areas. These shoe covers are popular in medical and pharmaceutical environments, GMP…

Easy-tie surgeon’s cap is designed for particulate control. Our cap is easy to don and features adjustable ties. Lightweight, nonwoven material is comfortable and absorbent.

Insta-Gard® masks are the standard for procedural masks, and they are a cost-effective solution for general use, particularly in low-fluid cases. Blue polypropylene outer facing Protects against particles Downward folding pleats Sonically sealed edges Fully enclosed nosepiece

Kimberly-Clark* Universal Precautions Lab Coats are made with a protective 3-layer SMS fabric and are recommended where there is potential low to moderate exposure to fluids or chemicals. Offers exceptional resistance to blood strike-through at various levels of exposure. White. Traditional…

Particle Filtration to 0.1 Micron Features & Benefits The high value AlphaAir® facemasks are clean, comfortable and provide outstanding particle filtration down to 0.1 micron. The full-length aluminum nosepiece helps provide a perfect fit every time. The sonic welded design…

RightCare™3-PLY Sterile Pleated Facemask with Ties     RightCare™ Sterile Pleated 3-Ply Facemask with Ties, is constructed from a combination of clear polyethylene apertured film, PTFE (polytetrafluoroethylene) & clean polypropylene fabric material with soft…

Low linting lab coat for use in critical and low particulate clean environments. High filtration fabric holds out 98.8% of particles at 3 microns, and also provides excellent splash protection from non-hazardous fluids. Features include a snap front, knit wrists, knit collar, and three pockets.…

The disposable Nuisance Dust Mask provides basic protection against non-toxic dust, pollen, mold and dander.

These XtraClean™ lab coats are made of an anti-static treated, light weight and durable polypropylene fabric, which is cloth-like and has exceptional breathability. Ideal for non-hazardous personal and product protection, while providing cool comfort all day. Basic style XC7020 (white)…

White, 7” or 9” sizes with soft ties BICOSOF fabric interfacing for comfort Low-linting apertured polyethylene film outer layer provides protection from contamination. Excellent bacterial and particle filtration combined with good breathability. Masks are gamma sterilized and…

CleanMax Cleanroom Apparel is Clean-Manufactured in a silicone and latex free environment. Superior construction with bound seams. 99.999% Bacterial and Particle Filtration Efficiency Suitable for ISO CLass 4 and higher applications USP 795 and USP 797 Compliant Sterility Assurance Level…

Lab coats are 41” long (based on size Medium). Coats are 80% polyester/20% combed cotton poplin. These lab coats have a snap front, white polyester knit cuffs, convertible collar and side slits for pocket access.

These aprons are made of a chemical resistant PVC-Coated cloth which stays flexible. There is reinforcement at the points of strain. Cloth ties at the neck and waist.

Three-layer design mask with polyester/cellulose inner/outer facing provides comfort Double bagged Recommended for ISO Class 5 or higher cleanroom environments