Ace Glass Air
-
Increased sensitivity and versatility over other models, mercury requirement is reduced to 20-30cc. A control point within 1mm Hg can be fine-tuned by adjusting the height of the pump-out tubulation. The Cartesian driver float drops away from pump-out orifice on an increas- ing system pressure and…
-
-
Impinger, Air Sampling
Ace GlassA high velocity impinger (Ref. AGI-4) which passes 12.3 to 12.6L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary…
-
Air Sampling Cane, with Funnel
Ace GlassAir sampling cane with funnel at one end to avoid water droplets from collecting at edge and being sucked into manifold train. Bulge above the funnel is for glass wool or similar material to allow for filtering of particulates. Codes -22 & -26 feature a #7 Ace-Thred port for introducing calibration…
-
Midget Impinger
Ace GlassUnique impinger designed to be more economical when connecting in series eliminates need for connecting tubes.The 12/5 joints are perpendicular and come directly off bottle 180 degree apart. Screw cap on bottle has PTFE liner. Each bottle has one ball and one socket joint. Capacity 25mL. Bottle is…
-
Check Valve
Ace GlassAn all-glass check valve with ground seat for liquid seal. Available in style A for vertical use, and style B for right angle connection. Connections are 8mm O.D.
-
Manifold, O-Ring Joint Ends
Ace GlassSingle tube vacuum manifold with #15 o-ring joint ends. Available with 3 or 4 high vacuum stopcock ports. Order with inner joint port ends (14/20 or 24/40) or #15 o-ring joints. The distance between ports is 95mm, ideal for flasks up to 250mL. Please see our various o-ring joint adapters such as…
-
Storage Tube, Schlenk
Ace GlassGraduated Schlenk storage tube with 14/20 or 24/25 outer top joints, 14/35 or 24/40 inner joint side arms, stopcock inlet or hose barbed inlet valve. Reaction accessories include 7759 series filter tubes, 7807 series finger condenser, 9543 series stoppers and 13657-33 stirring magnet..
-
Impinger, Air Sampling
Ace GlassA high velocity impinger (Ref. AGI-30) which passes 12.0 to 13.0L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary…
-
Impinger, Air Sampling
Ace GlassA high velocity impinger air sampling which passes 6L/min (corrected to engineering gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is…
-
Manifold, Double Tube, O-Ring joint ends
Ace GlassDouble tube vacuum manifold with 4 x #15 o-ring joint ends. Available in 3 or 4 port configuration with Easy Action 0-10MM stopcocks. The ports can be ordered with either 14/20, 24/40 inner joints or #15 o-ring joints. Distance between ports is 100MM which will allow for flasks up to 250mL. Please…
-
Schlenk Tube, NO-AIR
Ace GlassSchlenk style reaction tube for vacuum and No-Air applications. Available in many capacities, joint sizes and side arm configurations including a glass stopcock, 0-3 inlet valve or a 0-4 Hi-Vac valve.
-
Manifold, Vacuum, Dual
Ace GlassGlass Manifold with #15 Ace-Thred at either end to allow switching vacuum connection to left or right side. Supplied with three or five 0 - 4mm High Vacuum, Easy Action Stopcocks for sample ports. Plugs are PTFE with Nylon hooded handles and FETFE O-Rings. Ultimate vacuum of 10 - 7 can be realized…
-
Adapter, Vacuum
Ace GlassWith 14/20 or 19/22 joints, outer joint at top and inner at bottom. Size B hose connection is on side.
-
Valve, Vacuum Release
Ace GlassThreaded vacuum release valve with fingertip control for opening systems to the atmosphere. Plunger stem made of PTFE with single O-Ring of FETFE.
-
Manifold, Double Tube, O-Ring Joint Ends
Ace GlassDouble tube vacuum manifold with #15 o-ring joints at both ends. Available in either a 3 or 4 port configuration with 4mm bore glass double oblique stopcocks. The ports can be ordered in 14/20, 24/40 standard taper or #15 o-ring joints. The distance between ports is 210MM which allows for use of…
-
Adapter, Vacuum, Long Stem
Ace GlassUseful as a vacuum adapter or addition tube. Stem length below joint, 130MM. Hose connection is Size A for 5/16th I.D. tubing.
-
Adapter, Gas Inlet
Ace GlassAdapter with side hose connection. Use as gas inlet or vacuum adapter. With 14/10 or 14/20 externally threaded top outer joints and 14/10 or 19/38 inner joints and size A or B serrated hose connection off side. Supplied with holed cap and FETFE O-Ring.