Air Samplers

Compare Tool

Select up to 3 products

HomeAll Products

Air Air Samplers

1 - 32 of 68
Sort
View
Show
  • Ammonia Test Paper

    Micro Essential

    Hydrion Ammonia Meter Test Paper is designed and calibrated to measure the amount of ammonia in air in parts per million wherever there may be actual or potential ammonia pollution. The color chart has matches at 0-5-10-20-50-100ppm. The Hydrion Ammonia Test Kit is especially useful where…

  • Impinger, Greenburg-Smith

    Ace Glass

    A high velocity impinger for the determination of dust concentration in air or other gases. Total volume is approximately 500mL. Bottle joint is 45/50. Inlet/outlet are 12.5mm O.D. Modified versions available with spherical joints both vertical for connecting in series. Available with or without…

  • Banded Asbestos PCM Cassettes

    Environmental Express

    25mm Cassettes Asbestos cassettes are made of conductive polypropylene. They are supplied with 0.8µm mixed cellulose ester filters for PCM or 0.45µm filters of MCE with 5µm backup for TEM. All cassettes are sealed with the LOK-SealTm band. Both PCM and TEM cassettes include…

  • Roof Attachment, Nylon

    Ace Glass

    Roof attachment for securing sampling cane to roof of van. Fabricated of Nylon with two O-Rings that make a watertight seal. Threaded length is 20.3cm (8").

  • Impinger, Sherer

    Ace Glass

    Consists of bottle with hex base and 45/50 joint, SO2 bubbler stopper with 25 mm diameter Por. C (25-50m) fritted disc, and impinger stopper. Capacity, 275mL. Inlet/outlet are 8mm.

  • Check Valve

    Ace Glass

    An all-glass check valve with ground seat for liquid seal. Available in style A for vertical use, and style B for right angle connection. Connections are 8mm O.D.

  • Manifold, Vacuum

    Ace Glass

    Glass Manifold with #15 Ace-Thred at either end To allow switching 5853 vacuum connection to left or right side. Supplied with three or five, 4mm straight bore PTFE stopcock sampling ports. (Additional ports can be ordered.) Overall length of glass manifold is 230mm. Complete item consists of 8763…

  • Blower, Permanent Split Capacitor, Air Sampling

    Ace Glass

    Permanent split capacitor, steel housed blower used to pull air through our Air Sampling manifolds. Blower produces 50 cfm @ 0.0 meters of water static pressure which assures a minimum pressure drop across each port in the manifold train. Free air rpm is 3030. Available in both 115 & 230v…

  • Chemware® PVDF Bags with Septum Closure

    Saint Gobain

    Flexible Non contaminating Septum closure Use for gas or liquid sample containment Heat-sealed seams for leak-proof operation Reusable bags made of 2 mil PVDF fluoropolymer film, Chemware® Gas Bags offer an economical alternative for analysis of non-corrosive gases. Durable, heat-sealed seams…

  • DrägerTubes®

    Dräger

    DrägerTubes® are glass vials filled with a chemical reagent that reacts to a specific chemical or family of chemicals. A calibrated 100mL sample of air is drawn through the tube with the Dräger accuro® bellows pump. If the targeted chemical(s) is present the reagent in the…

  • Schlenk Tube, NO-AIR

    Ace Glass

    Schlenk style reaction tube for vacuum and No-Air applications. Available in many capacities, joint sizes and side arm configurations including a glass stopcock, 0-3 inlet valve or a 0-4 Hi-Vac valve.

  • BTI Inline: Filters Breakthrough Indicators Inline

    Chemteq

    Filters Breakthrough Indicators Inline for Acids, Ammonia, Ammonia & Hydrogen Sulfide, Basic Vapors, Formaldehyde, Humidity, Hydrazine, Hydrogen Sulfide and Mercury. The BTI Inline is colorimetric indicator that indicate the saturation and exhaustion of carbon adsorbers and filters.The BTI…

  • Air Sampling Collection Bottle

    Ace Glass

    Collection bottle, usually connected to the bottom arm of the 7495 tee with reduced ends, to collect heavy particulates before they enter the manifold train.

  • BTI Carbon Adsorbers and Filters Change Indicators

    Chemteq

    Carbon Adsorbers and Filters Change Indicators for Acids, Ammonia, Ammonia & Hydrogen Sulfide, Aromatic Diisocyanates, Basic Vapors, Halogens, Hydrazine, Formaldehyde, Hydrogen Sulfide and Mercury. The breakthrough (saturation) indicators are colorimetric indicators that indicate the…

  • Bubbler, Mineral Oil, Adjustable

    Ace Glass

    With completely adjustable 7mm inner tube. Tube has a pulled tip and is secured by a #7 Ace- Thred. Volume approximately 40mL. Tapered bottom of vessel allows for use with small volumes. Nylon bushing supplied with FETFE O-Ring. Available modified with #7 Ace-Threds on inlet/outlet for use with…

  • Banded Asbestos TEM Cassettes

    Environmental Express

    All Environmental Express 25mm Air Monitoring Cassettes are numbered and bar-coded and come with a Certificate of Quality. Asbestos TEM Cassettes are made of conductive polypropylene. They are supplied with 0.45µm MCE filters. All cassettes are sealed with the LOK-Seal™ band.…

  • Filter Breakthrough Indicators: for Low-Flow Waste Containers Filters

    Chemteq

    The HPLC Solvents Breakthrough Indicator is qualitative (yes/no) colorimetric indicator of the end-of-service life of low-flow filters. It is designed to provide real-time indication of the saturation and breakthrough of hplc solvents. HPLC solvents include Acetone, Acetonitrile, Chloroform,…

  • Midget Impinger

    Ace Glass

    Impingers used for sampling small air volumes at low velocities. Bottle with 24/40 stopper joint is available in 25 or 30ml sizes. The stopper is available with an open nozzle or one calibrated to deliver 0.09 to 0.11 CFM at 30.5cm (12in) vacuum. The stopper inlet is available as an open tube end,…

  • Manifold, Double Tube, O-Ring Joint Ends

    Ace Glass

    Double tube vacuum manifold with #15 o-ring joints at both ends. Available in either a 3 or 4 port configuration with 4mm bore glass double oblique stopcocks. The ports can be ordered in 14/20, 24/40 standard taper or #15 o-ring joints. The distance between ports is 210MM which allows for use of…

  • Vacuum Regulator, Improved Cartesian Type

    Ace Glass

    Increased sensitivity and versatility over other models, mercury requirement is reduced to 20-30cc. A control point within 1mm Hg can be fine-tuned by adjusting the height of the pump-out tubulation. The Cartesian driver float drops away from pump-out orifice on an increas- ing system pressure and…

  • Air Sampling Cane, with Funnel

    Ace Glass

    Air sampling cane with funnel at one end to avoid water droplets from collecting at edge and being sucked into manifold train. Bulge above the funnel is for glass wool or similar material to allow for filtering of particulates. Codes -22 & -26 feature a #7 Ace-Thred port for introducing calibration…

  • Imhoff Cone, Sedimentation

    Ace Glass

    Imhoff sedimentation cone for the determination of settleable matter in water. Either blunt tip or Ace-Thred tip for environmental applications. Graduated from 0-2ml in 0.1ml divisions, 2-10ml in 0.5ml divisions, 10-40ml in 1ml divisions, 40-100ml in 2ml divisions.

  • Gauge, Vacuum or Pressure

    Ace Glass

    With standard U shape gauge made of heavy barometer tubing and mounted on a wooden panel for vertical suspension. The scale is adjustable and accurately calibrated. Supplied with scale and tubes, but without mercury.

  • Schlenk Tube, NO-AIR

    Ace Glass

    Schlenk style reaction tube for vacuum and No-Air applications. Available in many capacities, joint sizes and side arm configurations including a glass stopcock, 0-3 inlet valve or a 0-4 Hi-Vac valve.

  • 25mm Blower Mount

    Ace Glass

    Aluminum blower mount for connecting 7511 blower to glass manifold. With threaded stock.

  • Adapter, Vacuum, with Stopcock

    Ace Glass

    Vacuum adapter with 2mm bore stopcock on side arm.

  • Impinger, Air Sampling

    Ace Glass

    A high velocity impinger which passes 6L/min (corrected to engineering gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is positioned 4mm above…

  • Manifold, Vacuum, Firestone

    Ace Glass

    Vacuum/gas manifold with a Firestone Rapid Purge Valve at one end and 0-5mm High Vacuum, Easy Action PTFE Stopcock ports with 3/8" 0.D. Swagelok tubing connections. Each connection has an O-Ring groove (O-Rings supplied) for use with #11 Ace-Thred. Valve eliminates the need for a second tube.…

  • Valve, Pressure Release, Automatic

    Ace Glass

    Automatic, adjustable pressure release valve for safer operation of pilot plant or other assemblies where the pressure is of great concern. The tension on the stainless steel spring determines the amount of pressure needed to force the lower piece open. With the spring supplied, the range is 15-50…

  • MD8 Air Samplers

    Sartorius

    The MD8 series of air samplers are monitoring devices combined with novel filtration systems for the exceptional recovery of airborne microorganisms. MD8 AirScan: (Integrated) Quantitative detection in sterile areas such as clean rooms/RABS, isolators, or blow-fill-seal machines. …

  • FLASK Reaction/Storage NO-AIR

    Ace Glass

    Schlenk style flask for vacuum, NO-AIR or gas applications. Can be used for storage or reactions. Top is either a no.15 o-ring or outer standard taper joints. Side arm has either a 0-3 inlet valve or a 2mm or a 4mm glass stopcock.

  • BTI 3 Carbon Adsorbers and Filters Change Indicators

    Chemteq

    Carbon adsorbers and Filters Change Indicators for Ammonia, Ammonia & Hydrogen Sulfide, Hydrazine and Hydrogen Sulfide. The breakthrough (saturation) indicators are colorimetric indicators that indicate the saturation and exhaustion of carbon adsorbers and filters. The indicators are…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.