Acids

Compare Tool

Select up to 3 products

1 - 32 of 8385
Sort
View
Show
  • Sulfuric Acid, BAKER ANALYZED ACS Reagent

    Avantor - J.T.Baker®

    Formula: H2SO4 Formula Weight: 98.08 CAS Number: 7664-93-9

  • Nitric Acid, 69.0-70.0%, BAKER INSTRA-ANALYZED Reagent

    Avantor - J.T.Baker®

    For Trace Metal Analysis Formula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2

  • Acetic Acid, Superior (ACS)

    GFS Chemicals

    CH3COOH CAS#: 64-19-7 F.W.: 60.05 Metals analysis reported on certificate in ppm.

  • Ammonium Hydroxide Veritas® Redistilled

    GFS Chemicals

    Trace metal grade. Low ppb metal impurities. Note: Results reported at time of bottling in glass. The levels of Al, B, Ca, K, Mg, Mn, Na and Si will increase over time.

  • Hydrochloric Acid, 36.5-38.0%, BAKER ANALYZED ACS Reagent

    Avantor - J.T.Baker®

    Formula: HCl Formula Weight: 36.46 CAS Number: 7647-01-0 Synonym(s): Muriatic acid; hydrogen chloride, aqueous

  • Hydrochloric Acid, 1.0N

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • Hydrofluoric Acid, 48.0-51.0 %, BAKER ANALYZED ACS Reagent

    Avantor - J.T.Baker®

    Formula: HF Formula Weight: 20.01 CAS Number: 7664-39-3 Synonym(s): Fluorohydric acid; fluoric acid; hydrogen fluoride solution

  • Phosphoric Acid, 85%, Superior (ACS)

    GFS Chemicals

    H3PO4 CAS#: 7664-38-2 F.W.: 98.00

  • Hydrochloric Acid, 37%, Superior (ACS)

    GFS Chemicals

    HCl CAS#: 7647-01-0 F.W.: 36.46 Metals analysis reported on certificate in ppm.

  • Nitric acid, fuming, 98%

    BeanTown Chemical

    CAS: 7697-37-2 EC No: 231-714-2 MDL No: MFCD00011349 UN No: UN2032; Haz Class: 8 (5.1,6.1); Packing Group: I Liquid Molecular Formula: HNO3 MW: 63.01 Boiling Point: 120.5° Density (g/mL): 1.483 Included Fees: the items below have a…

  • Hydrochloric Acid, 0.1N

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • OmniTrace Ultra™ Nitric Acid

    MilliporeSigma

    Formula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2 Synonym(s): Hydrogen Nitrate; Azotic Acid; Aqua Fortis

  • Acetic Acid (Glacial) 100% Anhydrous For Analysis EMSURE® ACS, ISO, Reagent Ph…

    MilliporeSigma

    Formula: CH3COOH Grade: ACS, ISO, Reag. Ph Eur CAS No.: 64-19-7 UN No.: UN2789 pH: 2.5 (50 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: 17°C Molar Mass: 60.05 g/mol Boiling Point: 116 - 118°C (1013 hPa) Vapor Pressure: 15.4 hPa (20°C) Flash Point: 39°C …

  • Fluka Ammonium hydroxide solution puriss. p.a., reag. ISO, reag. Ph. Eur., ~25%…

    Honeywell

    Chemical name: Ammonia Solution Chemical synonyms: Ammonia aqueous; Ammonia water Density (g/cm3): 0.91 Molecular weight: 35.05 Molecular formula: H5NO Chemical purity: ~25% NH3 basis UN Number: UN 2672

  • Hydrobromic Acid, 48% (ACS)

    GFS Chemicals

    HBr CAS#: 10035-10-6 F.W.: 80.91 Specific Gravity: 1.500

  • Hydrochloric Acid Fuming 37% For Analysis EMSURE® ACS, ISO, Reagent Ph Eur

    MilliporeSigma

    Grade: ACS, ISO, Reag. Ph Eur UN No.: UN1789 pH: Solubility: (20°C) soluble Melting Point: -28°C Boiling Point: 45°C Vapor Pressure: 190 hPa (20°C) Density: 1.19 g/cm3 (20°C)

  • Hydrochloric Acid, 50% v/v (1:1)

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • Sulfuric Acid, 0.02N (N/50)

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • Sulfuric Acid, 0.10N

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • Veritas® Hydrochloric Acid, Redistilled, 32-38%

    GFS Chemicals

    HCl CAS#: 7647-01-0 F.W.: 36.46 Specific Gravity: 1.160 Trace metal grade. Low ppb metal impurities. Note: Results reported at time of bottling in glass. The levels of Al, B, Ca, K, Mg, Mn, Na, and Si will increase over time.

  • Ortho-Phosphoric Acid 85% For Analysis EMSURE® ACS, ISO, Reagent Ph Eur

    MilliporeSigma

    Grade: ACS, ISO, Reag. Ph Eur UN No.: UN1805 pH: Solubility: (20°C) soluble Melting Point: 21°C Boiling Point: 158°C Vapor Pressure: 2 hPa (20°C) Density: 1.71 g/cm3 (20°C) Viscosity Kinematic: 30.5 mm2/s (20°C)

  • Hydrochloric Acid, 30-38%, Environmental Grade

    GFS Chemicals

    HCl CAS#: 7647-01-0 F.W.: 36.46 Trace metal/ICP grade packed in plastic resin bottles to eliminate common metals leached from glass.

  • Hydrochloric Acid, 36.5-38.0%, BAKER INSTRA-ANALYZED Reagent

    Avantor - J.T.Baker®

    For Trace Metal Analysis Formula: HCl Formula Weight: 36.46 CAS Number: 7647-01-0 Synonym(s): Muriatic acid; hydrogen chloride, aqueous

  • Hydrochloric Acid, 5.0N

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • Sulfuric Acid, 1.0N

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • Perchloric Acid, 60%, Superior (ACS)

    GFS Chemicals

    HClO4 CAS#: 7601-90-3 F.W.: 100.46 Metals analysis reported on certificate in ppm.

  • Nitric Acid, 69.0-70.0%, BAKER ANALYZED ACS Reagent

    Avantor - J.T.Baker®

    Formula: HNO3 Formula Weight: 63.01 CAS Number: 7697-37-2

  • GR ACS Acetic Acid, Glacial

    MilliporeSigma

    Formula: CH3COOH Formula Weight: 60.05 CAS Number: 64-19-7 Synonym(s): Methanecarboxylic Acid

  • Sulfuric Acid, 0.12N

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

  • Boric Acid For Analysis EMSURE® ACS, ISO, Reagent Ph Eur

    MilliporeSigma

    Formula: H3BO3 Grade: ACS, ISO, Reag. Ph Eur CAS No.: 10043-35-3 pH: 3.8 - 4.8 (33 g/l, H2O, 20°C) Solubility: 46.5 g/l (20°C) Melting Point: 171°C (decomposition) Molar Mass: 61.83 g/mol Bulk Density: 400 - 600 kg/m3 Vapor Pressure: 2.7 hPa (20°C) Density: 1.44 g/cm3…

  • L(+)-Tartaric Acid For Analysis EMSURE® ACS, ISO, Reagent Ph Eur

    MilliporeSigma

    Formula: HOOCCH(OH)CH(OH)COOH Grade: ACS, ISO, Reag. Ph Eur CAS No.: 87-69-4 pH: 1.6 (100 g/l, H2O, 25°C) Solubility: 1390 g/l (20°C) Melting Point: 168 - 170°C Molar Mass: 150.08 g/mol Bulk Density: 1000 kg/m3 Flash Point: 210°C Refractive Index: 210°C Density: …

  • Sulfuric Acid, 0.5N

    Thomas®

    Manufactured with a focus on quality, starting materials are usually ACS grade or higher and all reagents have Certificate of Analysis available. Reagents are manufactured under ISO 9001 quality standards and feature induction sealed caps to ensure product integrity and decrease the possibility of leaks.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.