Breakage is minimized by the heavy wall construction The large hexagonal base, sealed to the cylinder body, increases stability and prevents the cylinder from rolling off lab bench tops

Suitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…

Suitable for shaker culture applications Optically clear polycarbonate Sterilized by gamma irradiation Certified nonpyrogenic Certified RNase- and DNase-free Corning Baffled Erlenlenmeyer Flasks are for use in shaker culture applications. Models are available with vent caps…

PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped.  These Class A…

Carefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…

PMP (polymethylpentene) provides glass-like clarity. Cleaning at no higher than 60°C is recommended to preserve markings on products with colored overprinting.

Calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 The double scale, numbered up and down, is in durable white enamel. Supplied with shock-absorbing polyethylene bumper guards.

A tall beaker with spout to facilitate pouring. For convenience, these beakers are graduated to indicate their approximate content.

Perform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…

Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings.  Glass beads indicate full capacity line. Permanent white enamel…

Screened white enamel graduations Sterilized by gamma radiation Large white marking spot Break resistant polycarbonate material 45 mm size cap provide greater access for liquid transfer Bottles can be autoclaved once at 121°C and 15 psi Easy opening packaging Available in…

Nalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…

Special no-drip pouring spouts Constructed of chemically resistant, autoclavable polypropylene For general laboratory use. Will withstand temperatures up to 120°C. Graduated in mL.

Beakers, molded in polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New Style beakers feature oversized, tapered spouts for easier pouring of solutions.

75 mm Supor® machV PES membrane Molded-in graduations Polystyrene housing 595 bottle-top filters feature a 75 mm diameter asymmetric polyethersulfone membrane. Filters securely screw onto glass media bottles with 33- or 45- mm neck sizes and allow direct filtration of liquid into sterile glass…

Manufactured in state-of-the-art molding facility using high purity virgin materials conforming to US FDA 21 CFR. TPX material is highly transparent as well as chemically resistant with a higher temperature tolerance than PP beakers. Tapered stacking style saves space and makes it easy to handle.…

Funnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…

Manufactured in state-of-the-art molding facility using high purity virgin materials conforming to US FDA 21 CFR. TPX Polymethyl pentene (PMP) material is highly transparent as well as chemically resistant with a higher temperature tolerance than PP beakers. Tapered stacking style saves space and…

PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…

Polypropylene construction Sizes range from 50 to 5000 mL Thomas Low-Form Griffin Beakers have easy-to-read screened graduations plus size code, resin code, maximum use temperature and "No flame" symbol. Ribs make stacking easy. Beakers meet ISO/DIS 7056 International…

Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel

PYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42

PYREX® single metric scale cylinder is calibrated "to contain". The scale and figures and durable white enamel, which stand out clearly against the red color band on these Lifetime Red cylinders. The 10 mL size features a funnel top. Bumper guards are supplied with 100-, 500- ,…

Chemically inert PTFE beakers can withstand temperatures up to 260°C.

Autoclavable, easy-to-clean and temperature-resistant, these low-form griffin beakers are excellent for use in a wide range of trace analysis applications. These beakers are manufactured from PFA (a perfluoxy copolymer), which is highly resistant to heatr and chemical contamination, with surface…

Low Form Beakers with pour lip pressed from one piece with flared tops and slightly tapered walls. Metal beakers are polished inside and out.

With attached screw caps Ideal for field or general laboratory use

Name Squibb Separatory Funnel with PTFE Stopcock and Plastic Stopper Capacity (mL) 500 Stopcock Bore Size (mm) 4 Standard Taper Stopper Size 27 Stem Length (mm) 60 Shelf-Pack Qty 1 Case Qty 4   …

Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…

Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.

Delong style Extra deep baffles These PYREX Delong style shaker culture flasks have three extra deep baffles designed to provide greater agitation of solutions to improve oxygen or gas transfer when used with rotary or reciprocating shakers. The long neck reduces splashing and is…

Narrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…