Corning Tubes

Meet bioanalytical-grade requirements and provide unsurpassed performance in critical research applications Exceptionally strong—Industry leading centrifugation rating of 16,000 RCF (50 mL polypropylene) Unique double threaded cap design reducing cross threading and leakage Easy-to-read...

A faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues      Consistently obtain a more uniform single-cell suspension      Three nylon mesh pore sizes for optimal performance in a variety...

Widely used and referenced in laboratory protocols      Dual position snap-cap prevents sample loss with ease of handling      Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile)   The foundation for consistent research...

Beaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.

Widely used and referenced in laboratory protocols      Dual position snap-cap prevents sample loss with ease of handling      Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile)   The foundation for consistent research...

Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with more consistent uniform...

Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane...

Axygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip formats 96...

These 7x280mm PYREX® capillary tip bleed tubes are for bleeding gases, steam or liquids below the liquid surface of sidearm distillation flasks. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K.

These 50mL PYREX® round bottom, nongraduated centrifuge tubes have a No. 13 Standard Taper solid glass pennyhead stopper. Rockefeller Institute of Medical Research type.

Screw cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415 cap; case of 500...

Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

As supplied with 9212K21 series test tubes, with Teflon over-liner Cap size shown is GPI thread-finish

These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C. Caps are provided with a white rubber liner.

Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel...

Skirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached

These 40mL heavy duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length...

These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI...

Axygen microcentrifuge tubes feature a screw cap that provides a tight secure seal. Screw cap tubes are available in a variety of colors with a conical or self-standing bottom. Sterile options are also available.Maximum G-force is 20,000 RCF.RNase-/DNase-freeNonpyrogenicTubes, with Cap, SterileAll...

Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and pyrogen safe...

Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand operation...

Self-standing polypropylene transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; Pressure tested...

These heavy duty 10mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these...