BRAND plastic cuvettes are an excellent choice for most spectrophotometry applications in the visible range. Manufactured from polystyrene (PS), they provide accurate, reliable results, even at wavelengths as low as 300nm. BRAND plastic cuvettes are compatible with most spectrophotometers and…

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, Compatible with Agilent Cary 50/60 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Disposable cuvettes with four optically clear sides from BRAND for use in fluorescence applications when results count.  Available in high quality polystyrene for measurements from 340nm to 800nm, as well as a proprietary polymer for precise measurements in both the visible and UV-range…

Disposable Methacrylate Cuvettes Convenient and affordable Save time with no cleaning required Prevents cross-contamination Useable in the range of 285 to 750 nm. Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5 x 45 mm outside…

Test tube holder, for using 16mm od test tubes in sample compartment instead of conventional cuvettes, for Cary 50/60 only. Application: For Using 16mm OD Test Tubes in Sample Compartment Instead of Conventional Cuvettes, For Cary 50/60 Only, UV-Vis & UV-Vis-NIR This product is only available to…

Minimum working capacity as shown in listings Cell bodies are of fused-wall construction. Matched sets are supplied in cushioned storage box. Includes Teflon® cover. 8491M18 cells require 8494J20 adapter to accommodate cells in standard cell carrier.

Square, 10 mm Light Path Cells Outside dimensions approximately 12.5 x 12.5 x 46 mm high Light path: 10 mm, ±0.01mm Teflon® cover included Matched sets are supplied in cushioned storage box Cell bodies are of fused-wall construction Cells are usable in spectral…

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

Jenway offer an extensive range of cuvettes for measuring liquid samples. The cuvette required will depend on the wavelength range required and the sample volume available. Glass cuvettes are only suitable for the visible region, whereas quartz may be used in both the UV and visible region. A 10mm…

Matched pair, stoppered with PTFE stopper supplied, base thickness 12mm, self-masking black walls, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not…

Deuterium and Visible source lamps provide good intensity over the widest possible wavelength range, plus optimum stability to ensure the best performance with Agilent UV-Vis and UV-Vis-NIR systems. They are selected by our QC process to ensure the optimum lifetime. Application: For Cary…

The Agilent Technologies temperature probe holder is suitable for use in rectangular micro-cells. Application: For Use in Rectangular Micro-Cells This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

supplied with 1 PTFE stopper, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Disposable Polystyrene Cuvettes Convenient and affordable Save time with no cleaning required Prevent cross-contamination Useable in the range of 340 to 750 nm Tight dimensional tolerances ensure high reproducibility from package to package. 10 mm path length; 12.5 x 12.5…

A wide selection of cells to meet the demanding specifications of UV/VIS spectrophotometers. All cells are fire-fused so they can be cleaned repeatedly and there are no seams or joints to lock in air. 100% handcrafted and individual inspection guarantees the highest quality levels and excellent performance.

The Agilent Technologies filter kit is used in linearity calibration routines, for proper instrument and DRA calibration. It is compatible with Cary 5/500 systems. Application: For Cary 5/500, Used With Linearity Calibration Routines to Ensure Instrument & DRA are Correctly Calibrated This…

Type 28 cells are identical to Type 18 Micro cells, except these cells are supplied with a PTFE stopper to fit in a ground cone to reduce evaporation of volatile samples (The Type 28B comes with stoppers). The external height is 48mm plus the stopper. Micro cells are available with either clear…

Semi-micro and micro cells have an inner width of 4 mm to 2 mm. The thickness of the base is 9 mm. All semi-micro and micro cells are for use with spectrophotometers having a beam height of 15 mm. For applications with a wave length range of interest in the visible range use our low cost Agilent…

Rectangular or circular (mull) windows sold in pairs. For rectangular windows, there is one window drilled for the sample ports, and one undrilled. Circular windows are not drilled. Sealed window sets with a fixed pathlength. The windows are sealed together with a lead spacer using a proprietary…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Round Glass Cuvettes are designed to fit with Abbott TDx. Made from borosilicate glass. 12 mm x 50 mm dimensions

Rectangular cuvettes (macro cells) are the most common type. They are compatible with virtually every UV system. Agilent offers a wide range of rectangular cells with optical path lengths from 1 mm to 100 mm. These cells have two clear windows, with adjacent windows frosted for easy handling. …

The Agilent Technologies deuterium UV lamp is mainly used in the process of spectroscopy to maintain a continuous spectrum throughout. The low-pressure gas-discharge design ensures durability. This product is only available to U.S. Domestic Customers. For research use only, not to be used…

Matched pair, stoppered with PTFE stopper supplied, Compatible with Agilent Cary Eclipse Fluorescence spectrophotometer. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies cuvette holder is suitable for use with external diffuse reflectance accessory (DRA) for Agilent cary 4000/5000/6000 UV-Vis system. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis This product is only available to U.S.…

Spectrosil® Far UV Quartz windows, Useable range: 170 to 2700 nm Dual path length cells Types 52 and 53 allow for both fluorescence and absorbance measurements to be made with small volumes with a choice of two path lengths, dependent on the orientation of the cell in the cell holder. All…

The beam size is ~ 3 mm diameter at the transmission position and 3.5 mm tall by 1.5 mm wide at the reflectance position. Application: For External Diffuse Reflectance Accessory (DRA) For Cary 4000/5000/6000. Consists of an Iris, Mirror Assembly, & Three Lens Options to Focus the Beam to a Smaller…