Reaction Vessels & Flasks
-
Reaction Vessels, Spherical, Morton Type
ChemglassSpherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel…
-
Corning PYREX® Kettles Designed for long life and maximum safety Wide mouth, which permits easy access to interior for cleaning Cover of heavy-pressed construction Lower sections are mold-blown for maximum resistance to mechanical breakage Offers a broad range of sizes …
-
This fluid driven Spray Ball gives nearly 360° spray coverage and is a convenient way to clean Chemglass 10 thru 100L glass reactors without dismantling the entire setup. It can also be used as a wall wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
Complete, two-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and head) design allows…
-
Ai Single Jacketed Glass Reactor System
Across InternationalAi R-series single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the…
-
Ai Non-Jacketed Glass Reactor with 200°C Heating Jacket
Across InternationalAi R-series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a…
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space Perfluoro O-Rings on Tip and Plunger. …
-
Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The 10/30 outer joint will permit a thermometer to be inserted vertically to the bottom of the vessel. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
Reaction Vessel Lid, 7-Neck, 300mm
Chemglass7-Neck reaction vessel lid for 300mm flanged vessels. Lid has a CN 45/50, 5-SN 45/50, and 1-SN 80mm Duran o-ring flange angled for powder addition. PLEASE NOTE: 80MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY. *** PLEASE NOTE: THE ANGLED POWDER ADDITION PORT IS NOW 80MM AND NOT…
-
Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…
-
30L Process Reactor Sytems
ChemglassComplete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…
-
STEM RS1000 Reaction Stations
Electrothermal (Cole-Parmer)The STEM RS1000 Reaction Station has 10 positions that can be programmed to run at the same temperature and stirring rate simultaneously. It can be used for a wide range of applications from simple synthesis in the laboratory to process optimisation in industry. Key Features 10 position…
-
Features: Oversized Rugged S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. All S.S. Uprights are Passivated to Inhibit Corrosion. Motor Mount for Electric, Air, or XP Motors with the Ability to Unlock and Swing Out Giving…
-
Reaction Vessel Lids, 4-Necks
ChemglassFour neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
This fluid driven spray ball gives nearly 360° spray coverage and is a convenient way to clean cylindrical reaction vessels from 300mL to 5L without dismantling the entire set-up. It can also be used as a wall-wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
Similar to CG-1860, but with the addition of a Luer inner joint below the 2mm PTFE stopcock.
-
Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Four side necks are vertical and one neck has a 10°; degree angle. Angled side neck is designed for use with CG-1235 angled distillation adapters. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
Dual-Jacketed Reactor Vessel
Across InternationalAcross International replacement dual-jacketed glass reactor vessel, specially made for Across International R10, R20, R50 and R100 series 10L, 20L, 50L and 100L jacketed glass reactors.
-
Shielded Reactor Support Frames
ChemglassFeatures: Rugged S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability All S.S. Uprights are Passivated to Inhibit Corrosion All S.S. Uprights are Passivated to Inhibit Corrosion Universal “H” Shaped Motor Mount for…
-
Use these electropolished stainless steel pressure vessels to propel filtration fluids through pressure holders by applying external pressure from compressed gases. Increasing pressure increases the efficiency of the EPR (ethylene propylene rubber) O-ring seal. Vessels feature 5-7⁄8"x…
-
Reaction Vessel Lids, PTFE, 150mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has nine openings: (A) center neck 1"; female NPT for PTFE standard taper adapter, (B) side necks 1"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10° X 10° compound…
-
Features: Glass Body Features a Heavy Duty GL Style Glass Thread. Auto-Stop When Opening the Valve. Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve. Zero Dead Space Perfluoro O-Rings on Tip and Plunger The CG-1968-GL…
-
Turn-key reactor system featuring a one-piece, unjacketed, pressure vessel with a combination Ace-thred valve and 28/15 o-ring ball joint bottom outlet. Vessel top has a 25mm Ace-thred center neck and various multi-neck configurations. System is designed to perform positive pressure reactions at up…
-
Storage vessel with a #15 o-ring joint on the sidearm and a Chem-Vacé; Chem-Cap®; valve to control gas or liquid flow into the vessel. Vessels are constructed of medium wall tubing and are used with AF-0060 and AF-0061 manifolds or any other Airfree®; component with a #15 o-ring…
-
Similar to AF-0522, but cylindrical in shape. The 25 and 50mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 100 and 350mL sizes have a 0-8mm valve size. PLEASE NOTE: STIR BARS LARGER IN DIAMETER THAN THE OPENING OF THE VALVE, OR STANDARD TAPER JOINT, CAN BE SEALED INTO VESSELS…
-
Distillation kit for Chemglass 10 and 20L reactor systems. Supplied complete with support shelf to fit CG-1965-X style frame and the components listed in the link below. This add-on kit makes it easy to convert any of our standard reactors over to a complete distillation system. Items…
-
For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 S.S. tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides…
-
20L Process Reactor Sytems
ChemglassComplete reactor system on our NEW open air, auto-center stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…
-
Reaction Vessels, Cylindrical, Jacketed
ChemglassCylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with two removable hose connections to reduce the…
-
Reaction Vessel Lids, PTFE, 100mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 3/4"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10; X 10° compound…
-
Reaction Vessels, Jacketed, Benchtop
ChemglassFeatures: Chemically Resistant Perfluoro O-Rings On All CG-911-A And CG-511 Drain Valves Graduation Scale On Both Sides Showing the Approximate Volume Sidearm on Lower Drain Valve Can Be Used With a Standard 1/2 or 3/4in TFE, PFA or PP Compression Fitting All Vessels Are Serial…
-
Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…