• PRODUCT AVAILABILITY: Did you know you can view a product's availability right on the product page? Simply enter the quantity you want to purchase and the current availability will appear below the item.

Thomas Scientific Bonus Item

Cannon Instrument

Digital Paddle Viscometers

Not yet rated

  • Rapid measurement of asphalt emulsions, suspensions, slurries, foods, residual oils and similar materials
  • Temperature control to 0.1°C at 25, 40, 50, 80, and 100°C
  • Rugged and lightweight
  • Most tests completed within 15 minutes
  • Easy-to-use

The CANNON Digital Paddle Viscometer has been designed to accurately measure the viscosity of asphalt emulsions, suspensions, marine fuels, residual oils, slurries, paints and similar materials between 30 and 30,000 centipoise (mPa·s) at temperatures of 25°C, 40°C, 50°C, 80°C, and 100°C (see temperature specifications for temperature associated with each model). Meets ASTM D 7226 for asphalt emulsion testing. Available in two models (standard and water-cooled), the Digital Paddle Viscometer can also be used for other applications consistent with its temperature control and viscosity measurement capabilities, including the ASTM D 244 consistency test. Ideally suited for field use, the Digital Paddle Viscometer can determine the viscosity of lubricating oils, marine fuels and other liquids, yielding results with an accuracy of five percent or better for most materials—better than that required by ASTM D 445 for residual oils at 50°C.

Novel Design Features

The Digital Paddle Viscometer consists of a base, adjustable heated tray assembly, two sample cups, head unit, and two paddles (high and low viscosity), each with a one-hundred-fold range. A digital display on the front panel of the head unit indicates viscosity in centipoise (cP or mPa·s), or centistokes (cSt or mm2/s) and Saybolt Furol Seconds if a known density value is input by the operator prior to testing. The digital display also indicates the temperature, duration of test, and test status. Test data can be transferred to the optional label printer via an RS232 connector

An Automated Alternative

The Digital Paddle Viscometer has been designed to provide a cost-effective and automated alternative to older, labor-intensive and less precise instrumentation and methodologies. Test data has been found to correlate well with the Saybolt viscometer method.

Running the Test

To test a sample, the operator fills a sample cup to the fill line, places the cup in the insulated tray assembly, and raises the tray to lock it in the test position. One touch on the keypad initiates the test. Most tests can be completed in less than 15 minutes. No operator supervision is required after the test has begun. When the test is complete, viscosity is automatically calculated and displayed. Cleaning is quick and convenient; just detach the paddle and remove the sample cup from the holder.

Safety Features

The unit performs an automatic self-test of display, memory, analog-digital converter function, and power supply voltage levels on startup. A thermostat in the heater cup senses any over-temperature fault condition and removes power from the heater until the temperature drops to a safe level. If the control RTD is disconnected, power to the heater cup is cut off. If the motor shaft and attached paddle are immobilized, power to the motor is removed.

Dimensions: 191 mm wide x 235 mm deep x 451 mm high (7.5 x 9.5 x 17.75 inches) [150 mm rear clearance required]
Weight: 7.7 kg (17 lbs)
Shipping Weight: 12.3 kg (27 lbs)
Viscosity Range: 30 to 30,000 cP (100-fold range, select low or high viscosity spindle when ordering)
Viscosity Accuracy: ±5% from 30 to 3000 cP; 10% from 3000 to 30,000 cP
Test Temperatures: 25°C(water-cooled only), 40°C, 50°C, 80°C, 100°C
Temperature Accuracy: ±0.1°C
Operating Conditions: 15°C to 30°C, 15 to 95% relative humidity, non-condensing
Power Requirements: 100 to 120V, 50/60 Hz, 120W; 200 to 240V, 50/60 Hz, 120W

Please Enter Your Order Info

Filter by:

Product Detail
Thomas No.
1210F45
Mfr. No.
9725-F70
Description
CANNON Digital Paddle Viscometer, 115V, 50/60 HZ

Thomas Scientific Bonus Item
list price/quantity total
$0.00
Thomas No.
1210F46
Mfr. No.
9725-F75
Description
CANNON Digital Paddle Viscometer, 230V, 50/60 HZ

list price/quantity total
$0.00
$0.00 (0 Items)

Write A Review





Please Log In

Don't have a web profile? Create one now.