The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent. Pestle is rounded to conform to bottom of grinding chamber and is either…

These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the…

These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…

A precision ground instrument for macerating tissue. Rod and barrel are interchangeable. Rod is ground its entire length and can be reversed for double life. Rod fits Cat. No. 8124-10 Flex-Grip Chuck, forming a flexible coupling to the motor drive when

The DR 100 vibratory feed is for pourable bulk materials and combines an ergonomic design with the versatility to perform everyday functions smoothly and accurately. Performance features include feed grain size <2 mm (DR 100/15), <6 mm (DR 100/40) and <12 mm (DR 100/75). Hopper volumes…

Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with…

The Humboldt Medium, Riffle-type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such…

Feature Highlights: Three choices: ACT-AG12000 (Fixed Speed 12,000rpm), ACT-AG1500 (Fixed Speed 1,500rpm), and ACT-AG3080 (Adjustable Speed 3,000-8,000rpm) Motor driven Rechargeable battery keeps working for 10 hours Ideal for re-suspending pellets or disrupting soft tissue in…

The Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,…

Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…

Made of autoclavable CTFE/Stainless Steel Optional cordless drive unit available, see Thomas number 3411E25.

Resuspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles are made of autoclavable blue polypropylene Pestles specially designed to match microtubes Optional cordless drive unit available , see Thomas number 3411E25 .

The Dounce type, glass tissue grinder is supplied with two glass pestles; one with a tight inner tolernace and one with a loose inner tolernace. The loose pestle can be used for initial reduction of the tissue sample and the tight pestle can be used to fine grind the tissue and complete the homogenation.

Process materials up to 9 Mohs Closed grinding chamber with Plexiglas window Timed or continuous operation Wet or dry grinding Mortar grinders reduce inorganic and organic substances to analytical fineness. They can mix and homogenize powders, suspensions and pastes. Grinders…

These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…

This grinder has a serrated Teflon® pestle that disperses homogenate into the mortar cylinder more efficiently. These units are precisely constructed with completely interchangeable parts, allowing for easier replacement of parts so you don't need to keep pieces matched during cleaning.…

Gamma Sterilized Closed system can grind specimen in sealed container to prevent contact with sample Molded in abrasive surface does not leave sediment System comes fully assembled and Gamma sterilized Available in three models Tissue grinding system is designed with safety and…

Borosilicate Glass Finely ground pestle and tube Teflon® spacer aligns pestle and reduces aerosoling of product Matched sets

Similar to 3432N01 series, but with PTFE pestle and an unground glass tube Ideal for soft tissue such as brain or liver Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit). Available in working…

No sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…

Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8,…

The BioVortexer is a lightweight, battery powered unit designed to be used with microcentrifuge tubes. Centrifugal pellets, precipitates, and other solids are completely dispersed in seconds by a combination of mechanical and vortex action. A new polypropylene stir rod is used with each sample. …

Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a…

Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…

Combines both conical and cylindrical surfaces to effectively reduce tissue and produce a uniform homogenate Ideal for connective tissue, such as muscle, heart and lung Clearance between pestles and tubes is 0.004 to 0.006 inches* Pestle can be motor driven (see Thomas number…

Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are “total” not “annular”.

For grinding chemicals, drugs and gums, as well as heavier minerals in the dry state Distance between grinding plates is adjustable to vary fineness of the product Includes one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at…

Borosilicate glass Especially for soft tissues Stainless steel rod is long enough to chuck into a suitable drive motor

The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. It s ubstitutes cumbersome hand mortars by a high performance drive with electronic…

Selected to give the best fit to Pellet Pestles, Thomas 3411D75 series Constructed of autoclavable polypropylene Available in blue or natural color

High quality laboratory knife mill for grinding and homogenizing Homogenous samples for accurate analysis Industrial quality for demanding applications Programmable operating parameters for reproducible results The mill is designed for the fast and efficient processing of…